I'm Heading to UCLA - Page 2

Uncwilly · 2004-09-21, 17:49

The dorms in UCLA (and most Uni's) have hi-speed network connections.

jinydu · 2004-09-26, 03:36

I am living in an apartment unit, not a dorm.

However, I've discovered a problem. Ever since leaving home, my most powerful home computer has not communicated with the server at all, even though I instructed it to communicate with the server daily. The LL test it was doing when I left should be long done by now. What could be the problem?

delta_t · 2004-09-26, 04:32

It may have picked up a new exponent and is now doing the factoring and/or P-1. Once it finishes that it should report normally.

Quote:

Originally Posted by jinydu

I am living in an apartment unit, not a dorm.

However, I've discovered a problem. Ever since leaving home, my most powerful home computer has not communicated with the server at all, even though I instructed it to communicate with the server daily. The LL test it was doing when I left should be long done by now. What could be the problem?

Margaret3000 · 2004-09-27, 21:34

Quote:

Originally Posted by jinydu

Tomorrow, I will board a (very long flight across the Pacific Ocean) flight to Los Angeles. On Sept. 27, I will begin my undergraduate education at the University of California Los Angeles. I'm planning on majoring in Mathematics.

This should have no effect on my computers' GIMPS work. Also, I should be able to continue posting on this forum as normal once I get there.

Jin

Have a good trip!

jinydu · 2004-09-27, 23:20

That computer still hasn't returned any results. According to my dad, the computer has now finished 2 exponents since I left. But it seems to be unable to communicate the results to the server.

PrimeCruncher · 2004-09-27, 23:52

Quote:

Originally Posted by jinydu

That computer still hasn't returned any results. According to my dad, the computer has now finished 2 exponents since I left. But it seems to be unable to communicate the results to the server.

Worst case scenario: e-mail the prime.spl file to George and he'll credit you manually.

jinydu · 2004-10-05, 23:27

Finally, the computer made a successful Manual Communication (I asked my dad to do it). Unfortunately, it seems 2 weeks of computing have disappeared without a trace... Still it's better than losing the entire computer from GIMPS.

jinydu · 2004-10-20, 06:42

Unfortunately, the computer has stalled, again! No updates since Oct. 13. It should have finished its exponent 5 days ago!

PrimeCruncher · 2004-10-20, 22:07

Since you're no longer there to supervise it, it's taking a break from Prime95 duties.

jinydu · 2004-10-21, 00:29

It had been working flawlessly for almost two years before I left! I guess its time for another talk with my dad...

jinydu · 2004-10-23, 23:28

More oddities! On my Individual Account Report page, it incorrectly states that my new laptop is 596MHz, when in fact it is 1596MHz. This is not a serious problem, but...

Well, the main problem continues to persist. Its especially frustrating, because it is a powerful producer: 3.055GHz. I've had an instant messenger conversation with my dad about it:

duruxu: Here is what the Prime95 said: "unable to open spool file", unable to open log file
jinydu: Is there an error number?
duruxu: No
jinydu: Has it stopped running completely, or is it just unable to communicate?
duruxu: it says "will try contracting server again in 60 minutes
jinydu: But I mean, is it still running a prime test? Is the iteration number increasing?
duruxu: No
jinydu: Hmm, how about this? Go to Test-> Exit. Then restart Prime95.
duruxu: Exit is done. Now I cannot find where is the Prime95
jinydu: Go to Start -> All Programs. It should be there somewhere
duruxu: Ah, it is running now
jinydu: Ok, good. What exponent is it testing?
duruxu: 13009309
jinydu: Ok, what is the current iteration number (approximately, since its constantly changing)?
duruxu: 11010900
jinydu: Ok, so it has made some progress since it last updated the server. Now, could we try a Manual Communication?
duruxu: tried
jinydu: Hmm, didn't see any change in the status. Did it say "Done Communicating with Server", or was there an error message?
duruxu: There is no error message this time
jinydu: Strange, there's still no change in status. Did you remember to check the box saying "Send new expected completion dates?"
duruxu: Just did that
jinydu: Hmm, ok, try this
jinydu: Go to Options -> Preferences
jinydu: Change "iterations between screen outputs" to 10000. That should stop the numbers moving (more precisely, slow it down by a factor of 10000)
duruxu: Yes, it does
jinydu: Ok, now you can try Manual Communication. Please tell me everything that it says.
duruxu: It says "done communicating with server"
duruxu: nothing else
jinydu: That's just strange... I've got just one last idea. Go to Test -> Stop. The icon should turn yellow. Then, go to Test-> Continue, turning it back to red. Then, Exit the program (Test->Exit) and reopen in a different user account. Then, try Manual Communication.
duruxu: Well, as I do "continue", it gives a message "error writing intermediate file: rD009309
duruxu: "Error opening results file to output this message:"
duruxu: "Unable to open log file,"
duruxu: "Execution halted."
duruxu: "Choose Test/Continue" to restart
duruxu: "ERROR: Unable to open spool file"
duruxu: "Resuming primality test of M130093909 at iteration 11004801 [84.59%]"
jinydu: Hmm. That's lower than 11010900, the number you gave me before. Therefore, it must have been unable to write a save file. This is not a trivial problem...
duruxu: "[Oct 24 07:22] Iteration: 11010000/13009309 [84.63%]. Per iteration time: 0.030 sec."
duruxu: My typing may not be very accurate.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Web Cam in a car heading West on Route 66.	E_tron	Lounge	2	2007-08-01 21:23

2004-09-21, 17:49	#12
Uncwilly 6809 > 6502 """"""""""""""""""" Aug 2003 101×103 Posts 265A₁₆ Posts	The dorms in UCLA (and most Uni's) have hi-speed network connections.

2004-09-26, 03:36	#13
jinydu Dec 2003 Hopefully Near M48 2×3×293 Posts	I am living in an apartment unit, not a dorm. However, I've discovered a problem. Ever since leaving home, my most powerful home computer has not communicated with the server at all, even though I instructed it to communicate with the server daily. The LL test it was doing when I left should be long done by now. What could be the problem?

2004-09-27, 23:20	#16
jinydu Dec 2003 Hopefully Near M48 11011011110₂ Posts	That computer still hasn't returned any results. According to my dad, the computer has now finished 2 exponents since I left. But it seems to be unable to communicate the results to the server.

2004-10-05, 23:27	#18
jinydu Dec 2003 Hopefully Near M48 11011011110₂ Posts	Finally, the computer made a successful Manual Communication (I asked my dad to do it). Unfortunately, it seems 2 weeks of computing have disappeared without a trace... Still it's better than losing the entire computer from GIMPS.

2004-10-20, 06:42	#19
jinydu Dec 2003 Hopefully Near M48 3336₈ Posts	Unfortunately, the computer has stalled, again! No updates since Oct. 13. It should have finished its exponent 5 days ago!

2004-10-20, 22:07	#20
PrimeCruncher Sep 2003 Borg HQ, Delta Quadrant 2×3³×13 Posts	Since you're no longer there to supervise it, it's taking a break from Prime95 duties.

2004-10-21, 00:29	#21
jinydu Dec 2003 Hopefully Near M48 3336₈ Posts	It had been working flawlessly for almost two years before I left! I guess its time for another talk with my dad...

2004-10-23, 23:28	#22
jinydu Dec 2003 Hopefully Near M48 6DE₁₆ Posts	More oddities! On my Individual Account Report page, it incorrectly states that my new laptop is 596MHz, when in fact it is 1596MHz. This is not a serious problem, but... Well, the main problem continues to persist. Its especially frustrating, because it is a powerful producer: 3.055GHz. I've had an instant messenger conversation with my dad about it: duruxu: Here is what the Prime95 said: "unable to open spool file", unable to open log file jinydu: Is there an error number? duruxu: No jinydu: Has it stopped running completely, or is it just unable to communicate? duruxu: it says "will try contracting server again in 60 minutes jinydu: But I mean, is it still running a prime test? Is the iteration number increasing? duruxu: No jinydu: Hmm, how about this? Go to Test-> Exit. Then restart Prime95. duruxu: Exit is done. Now I cannot find where is the Prime95 jinydu: Go to Start -> All Programs. It should be there somewhere duruxu: Ah, it is running now jinydu: Ok, good. What exponent is it testing? duruxu: 13009309 jinydu: Ok, what is the current iteration number (approximately, since its constantly changing)? duruxu: 11010900 jinydu: Ok, so it has made some progress since it last updated the server. Now, could we try a Manual Communication? duruxu: tried jinydu: Hmm, didn't see any change in the status. Did it say "Done Communicating with Server", or was there an error message? duruxu: There is no error message this time jinydu: Strange, there's still no change in status. Did you remember to check the box saying "Send new expected completion dates?" duruxu: Just did that jinydu: Hmm, ok, try this jinydu: Go to Options -> Preferences jinydu: Change "iterations between screen outputs" to 10000. That should stop the numbers moving (more precisely, slow it down by a factor of 10000) duruxu: Yes, it does jinydu: Ok, now you can try Manual Communication. Please tell me everything that it says. duruxu: It says "done communicating with server" duruxu: nothing else jinydu: That's just strange... I've got just one last idea. Go to Test -> Stop. The icon should turn yellow. Then, go to Test-> Continue, turning it back to red. Then, Exit the program (Test->Exit) and reopen in a different user account. Then, try Manual Communication. duruxu: Well, as I do "continue", it gives a message "error writing intermediate file: rD009309 duruxu: "Error opening results file to output this message:" duruxu: "Unable to open log file," duruxu: "Execution halted." duruxu: "Choose Test/Continue" to restart duruxu: "ERROR: Unable to open spool file" duruxu: "Resuming primality test of M130093909 at iteration 11004801 [84.59%]" jinydu: Hmm. That's lower than 11010900, the number you gave me before. Therefore, it must have been unable to write a save file. This is not a trivial problem... duruxu: "[Oct 24 07:22] Iteration: 11010000/13009309 [84.63%]. Per iteration time: 0.030 sec." duruxu: My typing may not be very accurate.