HDT55TWFK6DGR voltage and round off error

RickC · 2011-02-17, 09:35

From http://products.amd.com/pages/deskto...il.aspx?id=652
AMD Phenom II X6 1055T
OPN Tray HDT55TWFK6DGR
OPN PIB HDT55TWFGRBOX
Revision E0
Core Speed (MHz) 2800
Voltages 1.075-1.375
Max Temps (C) 71
Wattage 95 W

So AMD says this processor is 1.375v.

Wikipedia says 1.425v
http://en.wikipedia.org/wiki/List_of...C_Hexa-core.29

I had mine running a 1.375v and it ended up making hardware mistakes. I had Prime95 64-bit running 3 threads of first time test and two of the threads gave an error and continued from last save file.
ERROR: ROUND OFF (0.5) > 0.40

Passes MemTest overnight, passes 6 core torture test for a few hours and then 1 core will report an error.

So I now have the voltage at 1.400v and it seems stable.

Is it okay to keep going on the first time checks or better to start them over?

Thanks,

Rick

RMAC9.5 · 2011-02-18, 12:01

RickC,

If you have just started these LL tests (e.g. < 20% done), I would restart the one with the error messages over again from the beginning. First time and double check LL tests with errors are "always" viewed with some suspicion.

RickC · 2011-02-19, 04:07

This site lists two max voltages, one without Turbo Core, one with Turbo Core.

http://www.cpu-world.com/CPUs/K10/AM...TWFGRBOX).html

1.075 - 1.375 (at rated frequency)
1.225 - 1.425 (Turbo Core mode)

Maybe my motherboard wants the frequency entered including Turbo Core.

Rick

2011-02-17, 09:35	#1
RickC Mar 2003 3²×5 Posts	HDT55TWFK6DGR voltage and round off error From http://products.amd.com/pages/deskto...il.aspx?id=652 AMD Phenom II X6 1055T OPN Tray HDT55TWFK6DGR OPN PIB HDT55TWFGRBOX Revision E0 Core Speed (MHz) 2800 Voltages 1.075-1.375 Max Temps (C) 71 Wattage 95 W So AMD says this processor is 1.375v. Wikipedia says 1.425v http://en.wikipedia.org/wiki/List_of...C_Hexa-core.29 I had mine running a 1.375v and it ended up making hardware mistakes. I had Prime95 64-bit running 3 threads of first time test and two of the threads gave an error and continued from last save file. ERROR: ROUND OFF (0.5) > 0.40 Passes MemTest overnight, passes 6 core torture test for a few hours and then 1 core will report an error. So I now have the voltage at 1.400v and it seems stable. Is it okay to keep going on the first time checks or better to start them over? Thanks, Rick

2011-02-19, 04:07	#3
RickC Mar 2003 3²×5 Posts	possible answer This site lists two max voltages, one without Turbo Core, one with Turbo Core. http://www.cpu-world.com/CPUs/K10/AM...TWFGRBOX).html 1.075 - 1.375 (at rated frequency) 1.225 - 1.425 (Turbo Core mode) Maybe my motherboard wants the frequency entered including Turbo Core. Rick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Skylake FMA3 round off error	tha	Hardware	17	2016-02-07 04:50
Round off error	Androx72	Software	2	2013-02-28 00:00
mprime ROUND OFF ERROR: Triple-check advised?	Bdot	Software	5	2012-12-22 22:34
Error: Round Off???	edorajh	Software	27	2007-11-10 06:26
Another Round Off Error Issue	PhilF	Software	12	2005-07-02 19:03

2011-02-18, 12:01	#2
RMAC9.5 Jun 2003 10011001₂ Posts	RickC, If you have just started these LL tests (e.g. < 20% done), I would restart the one with the error messages over again from the beginning. First time and double check LL tests with errors are "always" viewed with some suspicion.