Rounding Error - Page 2

Uncwilly · 2010-12-04, 02:07

http://www.digital-daily.com/motherb...t_deluxe/print

Looks like under Ai Tweaker.

RickS · 2010-12-04, 02:18

Sorry I wasn't clear, I am familiar with the AI tweaker, which setting is wrong?

btw I am running the DRAM Bus Voltage at 1.66V per this link http:/www.clunk.org.uk/forums/overclocking/22106-core-17-overclocking-guide-begginers.html

RickS · 2010-12-04, 13:39

Quote:

Originally Posted by sdbardwick

Really need to run memtest.
Memory manufacturers make their modules to run at a specific combination of speed and voltage. Your RAM might run fine at lower speeds at lower voltages, (like 1333MHz on 1.5V) but to run at 1600MHz it will need the correct voltage for that speed (in this case 1.65V). Intel advised that 1.65V is the max you should use on i7 processors (more and you could damage the memory controller).

The BIOS can incorrectly select a voltage that is too low for the configured speed; that leads to memory errors.

Okay, ran Memtest for 10+ hours, no errors.

cheesehead · 2010-12-07, 00:16

See http://mersenneforum.org/showthread....402#post240402

2010-12-04, 02:18	#13
RickS Dec 2010 2·5 Posts	Sorry I wasn't clear, I am familiar with the AI tweaker, which setting is wrong? btw I am running the DRAM Bus Voltage at 1.66V per this link http:/www.clunk.org.uk/forums/overclocking/22106-core-17-overclocking-guide-begginers.html Last fiddled with by RickS on 2010-12-04 at 02:24

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rounding error	Unregistered	Information & Answers	1	2010-12-18 19:53
rounding error	Unregistered	Information & Answers	4	2010-01-02 06:27
Rounding error	2ggy	Information & Answers	4	2009-09-11 10:23
Please help, rounding error?	r00t	Hardware	18	2004-02-01 20:20
rounding error	slimjim_8o	Software	6	2003-04-18 11:43

2010-12-04, 02:07	#12
Uncwilly 6809 > 6502 """"""""""""""""""" Aug 2003 101×103 Posts 2×7×19×37 Posts	http://www.digital-daily.com/motherb...t_deluxe/print Looks like under Ai Tweaker.

2010-12-07, 00:16	#15
cheesehead "Richard B. Woods" Aug 2002 Wisconsin USA 1E0C₁₆ Posts	See http://mersenneforum.org/showthread....402#post240402