Server outrages - Page 32

mdettweiler · 2014-07-29, 05:29

Quote:

Originally Posted by MyDogBuster

Does all this mean they are up or down 'cause I still can't get to Port 1468.

Whoops, forgot that one. It's running now.

(So many servers, so many port numbers to keep track of...

)

MyDogBuster · 2014-07-29, 07:14

Thx Max

gd_barnes · 2014-07-29, 08:58

Nice work Max. It wasn't quite as it seemed as far as the outage. I don't have a UPS attached and the blip was only for less than minute. Jeepford did not turn itself back on. I know this because my girlfriend was there at the time. She was kind enough to turn back on two of my machines but I just missed her call before she left the house so she did not know to log into Jeepford. I could have a friend go over and log into it if that is needed but it sounds like it's not. Thankfully there was not an internet issue this time around so you were able to take care of things remotely.

Do I need to do anything remotely before I get back? I'll be back a week from today. All of my cores were running a CRUS sieving job and I don't really care about trying to restart the 2 of them that were running on Jeepford.

mdettweiler · 2014-07-29, 16:37

No, there's nothing further that needs to be done remotely. Even once you get back, all the servers are up and running just fine, only on the text console side (make sure you don't try to start them again in a graphical terminal when you log in, that could cause problems! at the least it would error out binding to the port...)

AMDave · 2014-07-30, 10:52

Patch testing completed.
Results were poor.
Patch cancelled.
The stats DB is already very well optimized.
I made a config change to run the optimization less frequently instead.
EDIT - added another tweak that should cut about 400 seconds out of the stats refresh

AMDave · 2014-07-30, 13:16

CONFIRMED - NPLB hourly stats processing time down to 337 seconds (was 780 − 900 seconds)
Apologies to gamer007, Max and sm5ymt who each received one accidental prime notification from the TEST server as I forgot to turn the emails off in the PVT run.
As per my follow-up emails, please disregard those as you have already reported and submitted them.

AMDave · 2014-08-03, 02:09

Complete backup set offsite download completed for 2014-08-02. (4.8GB)

Lennart · 2014-08-05, 08:41

NPLB is down here.

Lennart

AMDave · 2014-08-05, 08:55

server is up, websites & databases also.
I'll jump on and check it out.

CONFIRMED - looks like the power blipped 1.5 hrs ago.

I'll see if I can get the ports up.

AMDave · 2014-08-05, 09:27

I may or may not have prpnet 1468, 2000, 9000 running in screen
I may or may not have llrnet 3500 running in screen
YMMV
I'll watch for a bit

ed - I see port activity now and the stats have fetched results from the ports and updated. I will check back later.

AMDave · 2014-08-05, 10:56

based upon some deduction I have resumed prpnet 1400 and 1465 for CRUS

and prpnet 12000 and lltnet 12050 for TPS

2014-07-30, 10:52	#346
AMDave Jan 2006 deep in a while-loop 2×7×47 Posts	Patch testing completed. Results were poor. Patch cancelled. The stats DB is already very well optimized. I made a config change to run the optimization less frequently instead. EDIT - added another tweak that should cut about 400 seconds out of the stats refresh Last fiddled with by AMDave on 2014-07-30 at 11:41

2014-08-05, 08:55	#350
AMDave Jan 2006 deep in a while-loop 2×7×47 Posts	server is up, websites & databases also. I'll jump on and check it out. CONFIRMED - looks like the power blipped 1.5 hrs ago. I'll see if I can get the ports up. Last fiddled with by AMDave on 2014-08-05 at 08:58

2014-08-05, 09:27	#351
AMDave Jan 2006 deep in a while-loop 292₁₆ Posts	I may or may not have prpnet 1468, 2000, 9000 running in screen I may or may not have llrnet 3500 running in screen YMMV I'll watch for a bit ed - I see port activity now and the stats have fetched results from the ports and updated. I will check back later. Last fiddled with by AMDave on 2014-08-05 at 10:06

2014-08-05, 10:56	#352
AMDave Jan 2006 deep in a while-loop 2×7×47 Posts	based upon some deduction I have resumed prpnet 1400 and 1465 for CRUS and prpnet 12000 and lltnet 12050 for TPS Last fiddled with by AMDave on 2014-08-05 at 11:06

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What exactly is sent to the server?	paul0	NFS@Home	2	2015-03-12 23:00
Server bug -- new?	Christenson	Information & Answers	5	2011-07-12 21:44
Server Down?	Grant	Information & Answers	13	2008-11-24 19:37
New ECM-server available	andi314	Factoring	3	2003-08-31 11:22
New Server Hardware and price quotes, Funding the server	Angular	PrimeNet	32	2002-12-09 01:12

2014-07-29, 07:14	#343
MyDogBuster May 2008 Wilmington, DE 2²·23·31 Posts	Thx Max

2014-07-29, 08:58	#344
gd_barnes May 2007 Kansas; USA 2²·19·137 Posts	Nice work Max. It wasn't quite as it seemed as far as the outage. I don't have a UPS attached and the blip was only for less than minute. Jeepford did not turn itself back on. I know this because my girlfriend was there at the time. She was kind enough to turn back on two of my machines but I just missed her call before she left the house so she did not know to log into Jeepford. I could have a friend go over and log into it if that is needed but it sounds like it's not. Thankfully there was not an internet issue this time around so you were able to take care of things remotely. Do I need to do anything remotely before I get back? I'll be back a week from today. All of my cores were running a CRUS sieving job and I don't really care about trying to restart the 2 of them that were running on Jeepford.

2014-07-29, 16:37	#345
mdettweiler A Sunny Moo Aug 2007 USA (GMT-5) 3×2,083 Posts	No, there's nothing further that needs to be done remotely. Even once you get back, all the servers are up and running just fine, only on the text console side (make sure you don't try to start them again in a graphical terminal when you log in, that could cause problems! at the least it would error out binding to the port...)

2014-07-30, 13:16	#347
AMDave Jan 2006 deep in a while-loop 2·7·47 Posts	CONFIRMED - NPLB hourly stats processing time down to 337 seconds (was 780 − 900 seconds) Apologies to gamer007, Max and sm5ymt who each received one accidental prime notification from the TEST server as I forgot to turn the emails off in the PVT run. As per my follow-up emails, please disregard those as you have already reported and submitted them.

2014-08-03, 02:09	#348
AMDave Jan 2006 deep in a while-loop 2·7·47 Posts	Complete backup set offsite download completed for 2014-08-02. (4.8GB)

2014-08-05, 08:41	#349
Lennart "Lennart" Jun 2007 2⁵·5·7 Posts	NPLB is down here. Lennart