PRPnet 1st drive-R/S base 2 even-k/even-n/odd-n

mdettweiler · 2009-07-28, 16:49

Hi all,

For quite a while now, Conjectures 'R Us has been making use of the PRPnet software to automate testing. With the recent release of PRPnet 2.2.3 and PFGW 3.2.0, PRPnet can test numbers at the same optimal speed as manual testing. Users can download the latest version of the client. If users are using an earlier version, we suggest performing a clean install of the latest version of PRPnet because a number of things have changed.

Update (2/7/11): The server is now running PRPnet version 4.1.4.

Instructions and download links can be found here. Though these instructions were written for the NPLB project, the procedures for CRUS are so similar that I figured it would be much simpler to only have to keep up this information in one thread.

The only difference is that instead of plugging in NPLB's servers, you can use the CRUS servers, listed below. Note that one very cool advantage of PRPnet, as described in that thread, is the ability to mix work from multiple servers; you may even want to use it to mix work from NPLB and CRUS servers.

Server info.:

CRUS PRPnet server #1 (updated 2011-08-09 21:00 GMT):
maintained by mdettweiler on gd_barnes machine
Short identification: G1300
server: noprimeleftbehind.net
port: 1300
base: Riesel/Sierpinski base 2 even-k/even-n/odd-n k's (16 k's)
n-range: 1M-2M
currently processing at n= 2M (complete)
Server summary: http://noprimeleftbehind.net:1300/all.html

The server has dried out pending more sieving.

MyDogBuster · 2009-08-04, 09:24

Hey guys.

I thought I'd try setting up a PRPNET Server on my machine and run some Riesel Base 27 tests as a test.

I'm using PRPNET 2.2.3, PRP Server 2.0.4. I set up the Client config to use the PFGW provided with the 2.2.3 d/l. The client and server are on the same machine.

I start the server and the client and I get the first candidate to test. The client runs the PRP test (29 minutes) and tries sending it back to the server. I know it runs PFGW because it is the only application I pointed to in the client config file.

This is what I see on the server.

[2009-08-04 08:31:41 GMT] PRPNet Server application v2.0.4 started.
[2009-08-04 08:31:41 GMT] Please contact Mark Rodenkirch at rogue@wi.rr.com for support
[2009-08-04 08:31:41 GMT] Waiting for connections on port 7101
[2009-08-04 08:32:16 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Sent 706*27^200038-1
[2009-08-04 09:01:43 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:01:43 GMT] Error sending <<INFO: All 1 test results were accepted>> to localhost:7101
[2009-08-04 09:01:54 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:02:05 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:02:16 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:02:27 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:02:38 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:02:49 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:00 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:11 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:22 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:33 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:33 GMT] Error sending <<INFO: Test for candidate 706*27^200038-1 accepted>> to localhost:7101
[2009-08-04 09:03:33 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 706*27^200038-1 : Residue
[2009-08-04 09:03:33 GMT] Error sending <<INFO: All 1 test results were accepted>> to localhost:7101
[2009-08-04 09:04:59 GMT] Accepted force quit. Waiting to close sockets before exiting

This is what I see on the client:

[2009-08-04 08:32:12 GMT] PRPNet Client application v2.2.3 started
[2009-08-04 08:32:12 GMT] User name MyDogBuster at email address is IMGunn1654@gmail.com
[2009-08-04 08:32:12 GMT] Base27: Getting work from server 192.168.2.7 at port 7101
[2009-08-04 08:32:16 GMT] Base27: INFO: Server has a limit of 1 work units.
[2009-08-04 09:01:21 GMT] Base27: 706*27^200038-1 is not prime. Residue F7341739D1DAC792
[2009-08-04 09:01:21 GMT] Total Time: 0:29:09 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:01:21 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:01:43 GMT] Total Time: 0:29:31 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:01:43 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:01:54 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:01:54 GMT] Total Time: 0:29:42 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:01:54 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:02:05 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:02:05 GMT] Total Time: 0:29:53 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:02:05 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:02:16 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:02:16 GMT] Total Time: 0:30:04 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:02:16 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:02:27 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:02:27 GMT] Total Time: 0:30:15 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:02:27 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:02:38 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:02:38 GMT] Total Time: 0:30:26 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:02:38 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:02:49 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:02:49 GMT] Total Time: 0:30:37 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:02:49 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:03:00 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:03:00 GMT] Total Time: 0:30:48 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:03:00 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:03:11 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:03:11 GMT] Total Time: 0:30:59 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:03:11 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:03:22 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:03:22 GMT] Total Time: 0:31:10 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:03:22 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:03:33 GMT] Base27: INFO: Test for candidate 706*27^200038-1 accepted
[2009-08-04 09:03:33 GMT] Total Time: 0:31:21 Total Tests: 1 Total PRPs Found: 0
[2009-08-04 09:03:33 GMT] Base27: Returning work to server 192.168.2.7 at port 7101
[2009-08-04 09:03:33 GMT] Accepted force quit. Waiting to close sockets before exiting.

This is what my candidates file looks like AFTER the test:

706*27^200038-1 N 1249376613 active
706*27^200038-1 T 1249374736 IMGunn1654@gmail.com MyDogBuster MyDog na
706*27^200118-1 N 0 active
706*27^200214-1 N 0 active
706*27^200222-1 N 0 active
706*27^200254-1 N 0 active
706*27^200270-1 N 0 active
706*27^200342-1 N 0 active

Any help would be appreciated. Looks like something is amiss.

rogue · 2009-08-04, 11:38

Quote:

Originally Posted by MyDogBuster

Hey guys.

I thought I'd try setting up a PRPNET Server on my machine and run some Riesel Base 27 tests as a test.

I'm using PRPNET 2.2.3, PRP Server 2.0.4. I set up the Client config to use the PFGW provided with the 2.2.3 d/l. The client and server are on the same machine.

I start the server and the client and I get the first candidate to test. The client runs the PRP test (29 minutes) and tries sending it back to the server. I know it runs PFGW because it is the only application I pointed to in the client config file.

Any help would be appreciated. Looks like something is amiss.

You must use the 2.2.x server with a 2.2.x client. The documentation doesn't state that, but that is the case.

MyDogBuster · 2009-08-04, 14:42

Quote:

You must use the 2.2.x server with a 2.2.x client. The documentation doesn't state that, but that is the case.

Okay thanks. Anyone have a spare 2.2.x server Windows download hanging around?

TimSorbet · 2009-08-04, 14:45

Quote:

Originally Posted by MyDogBuster

Okay thanks. Anyone have a spare 2.2.x server Windows download hanging around?

The PRPnet downloads that rogue posts in his thread include the server.
http://home.roadrunner.com/~mrodenki...pnet_2.2.3.zip

MyDogBuster · 2009-08-04, 14:53

Thanks Tim. I was toooooo lazy to look myself. LOL

mdettweiler · 2009-08-07, 15:33

I've split off all the stuff regarding the barfing problems and other such 2.2.3 server bugs to a separate thread. It was really starting to clutter up this thread quite a bit.

gd_barnes · 2009-08-13, 21:25

Due to the inherent difficulties with running PRPnet with a large # of cores, in discussion with the other admins, it has been decided to delay the implementation of PRPnet servers for project level drives by at least 3-6 months. The same applies at NPLB. PRPnet servers are still highly recommended for personal use for use on up to about 10 cores depending on the length of tests. The servers should not be used for very short tests or for huge # of k's such as would be the case for bases 3/7/15.

In the near future, we will be loading Sierp base 22 into port 3000. The tests will take longer than base 6 and there are only 4 k's remaining. Likely we'll still have a few issues with PRPnet if more than 20 cores are running it but the issues will not affect the primality tests themselves. We may just have to test some pairs manually or feed them back through the server a second time.

Sierp base 6 will be continued with manually reserved files. Riesel base 6 still needs some more sieving so we will start a sieving drive on that over the next few days before rolling out a new drive for it. Both sides are complete to n=150K. Karsten tested most of the Riesel side to that limit.

I have changed the 1st posting in this thread to reflect this change in project direction.

Gary

gd_barnes · 2009-08-13, 21:33

Max,

The status (1st) link looks garbled and the simiplied status (2nd) link is blank.

The users stats link looks OK.

Is this because the server has dried?

Regardless, when we do roll this out at the project level at NPLB and CRUS, we'll still want to make sure that all links work, even if the server has dried out.

Gary

mdettweiler · 2009-08-13, 22:11

Quote:

Originally Posted by gd_barnes

Max,

The status (1st) link looks garbled and the simiplied status (2nd) link is blank.

The users stats link looks OK.

Is this because the server has dried?

Regardless, when we do roll this out at the project level at NPLB and CRUS, we'll still want to make sure that all links work, even if the server has dried out.

Gary

The status page looks like that because the server's dried; it's a known bug, though relatively lower on the list of importance due to bigger issues with barfing, etc.

The simplified status page is a mystery of a different kind. Based on what we've been seeing a bit of lately, it's possible that accessing it prompts the server to drop some candidates from the prpserver.candidates file as Ian encountered earlier. However, we don't have enough data as of yet to confirm that this is the true cause of this problem. (At any rate, I'll take the link off the first post so that nobody messes up the server when it's got the new Sierp. base 22 stuff in it, if that is indeed the trigger for the test-dropping problem.)

mdettweiler · 2009-08-15, 05:49

All four k's remaining on Sierp. base 22 have now been loaded into G3000 for n=150K-200K. I've also upped the time limit for that server to 3 days (it was at 6 hours for debug purposes) in accordance with the much longer tests.

Gary, you can marked all k's on this base as reserved by "PRPnet" on the web pages.

2009-08-04, 09:24	#2
MyDogBuster May 2008 Wilmington, DE 2²·23·31 Posts	Hey guys. I thought I'd try setting up a PRPNET Server on my machine and run some Riesel Base 27 tests as a test. I'm using PRPNET 2.2.3, PRP Server 2.0.4. I set up the Client config to use the PFGW provided with the 2.2.3 d/l. The client and server are on the same machine. I start the server and the client and I get the first candidate to test. The client runs the PRP test (29 minutes) and tries sending it back to the server. I know it runs PFGW because it is the only application I pointed to in the client config file. This is what I see on the server. [2009-08-04 08:31:41 GMT] PRPNet Server application v2.0.4 started. [2009-08-04 08:31:41 GMT] Please contact Mark Rodenkirch at rogue@wi.rr.com for support [2009-08-04 08:31:41 GMT] Waiting for connections on port 7101 [2009-08-04 08:32:16 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Sent 70627^200038-1 [2009-08-04 09:01:43 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:01:43 GMT] Error sending <<INFO: All 1 test results were accepted>> to localhost:7101 [2009-08-04 09:01:54 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:02:05 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:02:16 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:02:27 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:02:38 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:02:49 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:00 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:11 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:22 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:33 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:33 GMT] Error sending <<INFO: Test for candidate 70627^200038-1 accepted>> to localhost:7101 [2009-08-04 09:03:33 GMT] IMGunn1654@gmail.com (MyDog) at 192.168.2.7: Received 70627^200038-1 : Residue [2009-08-04 09:03:33 GMT] Error sending <<INFO: All 1 test results were accepted>> to localhost:7101 [2009-08-04 09:04:59 GMT] Accepted force quit. Waiting to close sockets before exiting This is what I see on the client: [2009-08-04 08:32:12 GMT] PRPNet Client application v2.2.3 started [2009-08-04 08:32:12 GMT] User name MyDogBuster at email address is IMGunn1654@gmail.com [2009-08-04 08:32:12 GMT] Base27: Getting work from server 192.168.2.7 at port 7101 [2009-08-04 08:32:16 GMT] Base27: INFO: Server has a limit of 1 work units. [2009-08-04 09:01:21 GMT] Base27: 70627^200038-1 is not prime. Residue F7341739D1DAC792 [2009-08-04 09:01:21 GMT] Total Time: 0:29:09 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:01:21 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:01:43 GMT] Total Time: 0:29:31 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:01:43 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:01:54 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:01:54 GMT] Total Time: 0:29:42 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:01:54 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:02:05 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:02:05 GMT] Total Time: 0:29:53 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:02:05 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:02:16 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:02:16 GMT] Total Time: 0:30:04 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:02:16 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:02:27 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:02:27 GMT] Total Time: 0:30:15 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:02:27 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:02:38 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:02:38 GMT] Total Time: 0:30:26 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:02:38 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:02:49 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:02:49 GMT] Total Time: 0:30:37 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:02:49 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:03:00 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:03:00 GMT] Total Time: 0:30:48 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:03:00 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:03:11 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:03:11 GMT] Total Time: 0:30:59 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:03:11 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:03:22 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:03:22 GMT] Total Time: 0:31:10 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:03:22 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:03:33 GMT] Base27: INFO: Test for candidate 70627^200038-1 accepted [2009-08-04 09:03:33 GMT] Total Time: 0:31:21 Total Tests: 1 Total PRPs Found: 0 [2009-08-04 09:03:33 GMT] Base27: Returning work to server 192.168.2.7 at port 7101 [2009-08-04 09:03:33 GMT] Accepted force quit. Waiting to close sockets before exiting. This is what my candidates file looks like AFTER the test: 70627^200038-1 N 1249376613 active 70627^200038-1 T 1249374736 IMGunn1654@gmail.com MyDogBuster MyDog na 70627^200118-1 N 0 active 70627^200214-1 N 0 active 70627^200222-1 N 0 active 70627^200254-1 N 0 active 70627^200270-1 N 0 active 70627^200342-1 N 0 active Any help would be appreciated. Looks like something is amiss. Last fiddled with by MyDogBuster on 2009-08-04 at 09:33*

2009-08-13, 21:25	#8
gd_barnes "Gary" May 2007 Overland Park, KS 27115₈ Posts	Due to the inherent difficulties with running PRPnet with a large # of cores, in discussion with the other admins, it has been decided to delay the implementation of PRPnet servers for project level drives by at least 3-6 months. The same applies at NPLB. PRPnet servers are still highly recommended for personal use for use on up to about 10 cores depending on the length of tests. The servers should not be used for very short tests or for huge # of k's such as would be the case for bases 3/7/15. In the near future, we will be loading Sierp base 22 into port 3000. The tests will take longer than base 6 and there are only 4 k's remaining. Likely we'll still have a few issues with PRPnet if more than 20 cores are running it but the issues will not affect the primality tests themselves. We may just have to test some pairs manually or feed them back through the server a second time. Sierp base 6 will be continued with manually reserved files. Riesel base 6 still needs some more sieving so we will start a sieving drive on that over the next few days before rolling out a new drive for it. Both sides are complete to n=150K. Karsten tested most of the Riesel side to that limit. I have changed the 1st posting in this thread to reflect this change in project direction. Gary Last fiddled with by gd_barnes on 2009-08-13 at 21:26

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sierp base 6 - team drive #3	gd_barnes	Conjectures 'R Us	373	2014-06-11 21:31
Sierp base 16 - team drive #1	gd_barnes	Conjectures 'R Us	254	2014-06-10 16:00
PRPnet 2nd drive-51 bases with <= 5 k's to n=250K	gd_barnes	Conjectures 'R Us	158	2013-08-12 03:18
New PRPnet drive discussion	mdettweiler	Conjectures 'R Us	89	2011-08-10 09:01
Sierp base 3 - mini-drive II	gd_barnes	Conjectures 'R Us	46	2009-10-26 18:19

2009-07-28, 16:49	#1
mdettweiler A Sunny Moo Aug 2007 USA (GMT-5) 2·5⁵ Posts	PRPnet 1st drive-R/S base 2 even-k/even-n/odd-n Hi all, For quite a while now, Conjectures 'R Us has been making use of the PRPnet software to automate testing. With the recent release of PRPnet 2.2.3 and PFGW 3.2.0, PRPnet can test numbers at the same optimal speed as manual testing. Users can download the latest version of the client. If users are using an earlier version, we suggest performing a clean install of the latest version of PRPnet because a number of things have changed. Update (2/7/11): The server is now running PRPnet version 4.1.4. Instructions and download links can be found here. Though these instructions were written for the NPLB project, the procedures for CRUS are so similar that I figured it would be much simpler to only have to keep up this information in one thread. The only difference is that instead of plugging in NPLB's servers, you can use the CRUS servers, listed below. Note that one very cool advantage of PRPnet, as described in that thread, is the ability to mix work from multiple servers; you may even want to use it to mix work from NPLB and CRUS servers. Server info.: CRUS PRPnet server #1 (updated 2011-08-09 21:00 GMT): maintained by mdettweiler on gd_barnes machine Short identification: G1300 server: noprimeleftbehind.net port: 1300 base: Riesel/Sierpinski base 2 even-k/even-n/odd-n k's (16 k's) n-range: 1M-2M currently processing at n= 2M (complete) Server summary: http://noprimeleftbehind.net:1300/all.html The server has dried out pending more sieving. Last fiddled with by gd_barnes on 2011-08-09 at 21:00 Reason: update status

2009-08-04, 14:53	#6
MyDogBuster May 2008 Wilmington, DE 2²×23×31 Posts	Thanks Tim. I was toooooo lazy to look myself. LOL

2009-08-07, 15:33	#7
mdettweiler A Sunny Moo Aug 2007 USA (GMT-5) 14152₈ Posts	I've split off all the stuff regarding the barfing problems and other such 2.2.3 server bugs to a separate thread. It was really starting to clutter up this thread quite a bit.

2009-08-13, 21:33	#9
gd_barnes "Gary" May 2007 Overland Park, KS 10111001001101₂ Posts	Max, The status (1st) link looks garbled and the simiplied status (2nd) link is blank. The users stats link looks OK. Is this because the server has dried? Regardless, when we do roll this out at the project level at NPLB and CRUS, we'll still want to make sure that all links work, even if the server has dried out. Gary

2009-08-15, 05:49	#11
mdettweiler A Sunny Moo Aug 2007 USA (GMT-5) 2·5⁵ Posts	All four k's remaining on Sierp. base 22 have now been loaded into G3000 for n=150K-200K. I've also upped the time limit for that server to 3 days (it was at 6 hours for debug purposes) in accordance with the much longer tests. Gary, you can marked all k's on this base as reserved by "PRPnet" on the web pages.