i7 overclocking - Page 3

CADavis · 2009-03-18, 05:24

It's a Thermochill 120.3 radiator, designed for computer water cooling, and Danger Den TDX block. For water flow, I go from pump to cpu; it's not that powerful of pump that I am going to worry about the heat add.

The i7 has no problem running up to 85 or 90C (core temp, not die temp. My die temp was shown also in the pic, it was 48C).

It's not quite stable as it is. During torture test Blend with 3 GiB ram used, after had been going a few hours, I was watching a video in media player classic and halfway through the system got the BSOD. That's what has been happening when instability is happening; not getting errors in Prime95, just a freeze and BSOD. And the BS just gives generic "Unrecoverable Error" message.

Not sure what I want to do right now, probably just accept 4ghz and not run Prime95 for a while. Will come back in the near future and find a setting I can run 24/7 but I don't feel like it now. I'm comfortable with 7 hours Prime stable at 4ghz for non-Prime95 usage.

CADavis · 2009-04-12, 03:35

PROTIP: If you have to remove the PWM heatsink for some reason, DON'T remove the thermal pad and replace it with thermal paste:

http://img16.imageshack.us/img16/9784/kaboom2.jpg
http://img18.imageshack.us/img18/6898/kaboomc.jpg

Read my story here if you're interested http://www.xtremesystems.org/forums/...d.php?t=222446

Needless to say I need a new motherboard... and I have no way to test my CPU/RAM to see if it was affected by the blowup, until I get a new motherboard.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
overclocking	wildrabbitt	Hardware	16	2015-03-12 02:12
Overclocking	Primeinator	Information & Answers	12	2013-09-16 16:20
Does overclocking help?	esqrkim	Hardware	7	2010-06-26 08:15
What is overclocking?	JuanTutors	Hardware	39	2004-06-26 21:06
What is overclocking?	JuanTutors	Hardware	1	2004-06-22 00:10

2009-03-18, 05:24	#23
CADavis Jul 2005 Des Moines, Iowa, USA 2×5×17 Posts	It's a Thermochill 120.3 radiator, designed for computer water cooling, and Danger Den TDX block. For water flow, I go from pump to cpu; it's not that powerful of pump that I am going to worry about the heat add. The i7 has no problem running up to 85 or 90C (core temp, not die temp. My die temp was shown also in the pic, it was 48C). It's not quite stable as it is. During torture test Blend with 3 GiB ram used, after had been going a few hours, I was watching a video in media player classic and halfway through the system got the BSOD. That's what has been happening when instability is happening; not getting errors in Prime95, just a freeze and BSOD. And the BS just gives generic "Unrecoverable Error" message. Not sure what I want to do right now, probably just accept 4ghz and not run Prime95 for a while. Will come back in the near future and find a setting I can run 24/7 but I don't feel like it now. I'm comfortable with 7 hours Prime stable at 4ghz for non-Prime95 usage.

2009-04-12, 03:35	#24
CADavis Jul 2005 Des Moines, Iowa, USA AA₁₆ Posts	PROTIP: If you have to remove the PWM heatsink for some reason, DON'T remove the thermal pad and replace it with thermal paste: http://img16.imageshack.us/img16/9784/kaboom2.jpg http://img18.imageshack.us/img18/6898/kaboomc.jpg Read my story here if you're interested http://www.xtremesystems.org/forums/...d.php?t=222446 Needless to say I need a new motherboard... and I have no way to test my CPU/RAM to see if it was affected by the blowup, until I get a new motherboard.