LLRnet servers for NPLB - Page 60

em99010pepe · 2009-01-03, 03:23

C6000 is dead.

mdettweiler · 2009-01-03, 03:45

Quote:

Originally Posted by em99010pepe

C6000 is dead.

Oh, come on...there's no need to leave in a huff just over a few little k/n pairs.

It was primarily my boo-boo, not checking with Gary to get confirmation on whether we should load the k/n pairs--and, what did we lose, at the most, a few hours of processing? We could have easily lost more than that with a server outage.

mdettweiler · 2009-01-03, 03:47

Quote:

Originally Posted by IronBits

Port 8000 is down.
I have no clue what you want me to do from here.
Talk to me in email, if you want me to turn port 8000 back on.
I'm pretty sure what ever it was supposed to finish, finished at around 3pm Arizona time.

Well, according to nplb.ironbits.net there's still something left for 350K-352K--could you please remove all the k/n pairs for 200K-210K from port 8000's knpairs.txt (they should all be after whatever's left of 350K-352K), and then restart the server? Thanks.

IronBits · 2009-01-03, 04:42

I've emailed you the knpairs.txt, all 2 megs of it.
Send back what you want me to use. :(

Send me a care package for sieving. I ran it once before, but I don't recall how to.
create me a setup that I can unzip to some directory and run some program.
Give me lots to do for 8 cores, Intel, windows Vista 64bit OS.

mdettweiler · 2009-01-03, 06:23

Quote:

Originally Posted by IronBits

I've emailed you the knpairs.txt, all 2 megs of it.
Send back what you want me to use. :(

Send me a care package for sieving. I ran it once before, but I don't recall how to.
create me a setup that I can unzip to some directory and run some program.
Give me lots to do for 8 cores, Intel, windows Vista 64bit OS.

Okay, I've sent you the fixed knpairs.txt file. The care package will be on its way shortly.

IronBits · 2009-01-03, 06:44

Port 8000 is back online, come suck it dry as that is what Gary wants us to do.

IronBits · 2009-01-03, 10:20

It appears that port 8000 stopped handing out work about an hour and a half ago...
I know my cores can't get work, looked around, stop/started it several times, still nothing, so put my cores on another project until I figure out what, if anything, is wrong with the server.

em99010pepe · 2009-01-03, 10:21

Quote:

Originally Posted by IronBits

It appears that port 8000 stopped handing out work about an hour and a half ago...
I know my cores can't get work, looked around, stop/started it several times, still nothing, so put my cores on another project until I figure out what, if anything, is wrong with the server.

Reduce the jobmaxtime to 6 hours.

gd_barnes · 2009-01-03, 13:50

David,

n=350000-352000 was all that was supposed to be in the server and it has already been handed out. n=210000-220000 should never have been loaded in there. Anything remaining is sitting in someone's queue. Reducing JobMaxtime to 6 hours should clear everything out.

As for what to do with your machines, as suggested previously, could you please run some port 400 work? Or if you could get the sieving stuff worked out, that would be great.

To all,

Max has my phone # and several of you may still have my phone # from when we had the 4th drive crises. I've talked to David on the phone several times in the past. If there is ever a question about what to do with something and I'm not on, please call me on my cell phone. If I don't answer right away, leave a message and I'll get back to you very quickly.

Gary

gd_barnes · 2009-01-03, 15:36

Carlos,

Is port 6000 working? I wasn't able to connect to it a little while ago?

Gary

em99010pepe · 2009-01-03, 16:38

Please help to dry C6000 (k=341) because I won't be hosting anymore servers for NPLB.

2009-01-03, 04:42	#653
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 1113₁₀ Posts	I've emailed you the knpairs.txt, all 2 megs of it. Send back what you want me to use. :( Send me a care package for sieving. I ran it once before, but I don't recall how to. create me a setup that I can unzip to some directory and run some program. Give me lots to do for 8 cores, Intel, windows Vista 64bit OS. Last fiddled with by IronBits on 2009-01-03 at 04:43

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRPnet servers for NPLB	mdettweiler	No Prime Left Behind	228	2018-12-26 04:50
Servers for NPLB	gd_barnes	No Prime Left Behind	0	2009-08-10 19:21
LLRnet servers for CRUS	gd_barnes	Conjectures 'R Us	39	2008-07-15 10:26
NPLB LLRnet server discussion	em99010pepe	No Prime Left Behind	229	2008-04-30 19:13
NPLB LLRnet server #1 - dried	em99010pepe	No Prime Left Behind	19	2008-03-26 06:19

2009-01-03, 03:23	#650
em99010pepe Sep 2004 2×5×283 Posts	C6000 is dead.

2009-01-03, 06:44	#655
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 3·7·53 Posts	Port 8000 is back online, come suck it dry as that is what Gary wants us to do.

2009-01-03, 10:20	#656
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 459₁₆ Posts	It appears that port 8000 stopped handing out work about an hour and a half ago... I know my cores can't get work, looked around, stop/started it several times, still nothing, so put my cores on another project until I figure out what, if anything, is wrong with the server.

2009-01-03, 13:50	#658
gd_barnes May 2007 Kansas; USA 3²·13·89 Posts	David, n=350000-352000 was all that was supposed to be in the server and it has already been handed out. n=210000-220000 should never have been loaded in there. Anything remaining is sitting in someone's queue. Reducing JobMaxtime to 6 hours should clear everything out. As for what to do with your machines, as suggested previously, could you please run some port 400 work? Or if you could get the sieving stuff worked out, that would be great. To all, Max has my phone # and several of you may still have my phone # from when we had the 4th drive crises. I've talked to David on the phone several times in the past. If there is ever a question about what to do with something and I'm not on, please call me on my cell phone. If I don't answer right away, leave a message and I'll get back to you very quickly. Gary

2009-01-03, 15:36	#659
gd_barnes May 2007 Kansas; USA 10100010101101₂ Posts	Carlos, Is port 6000 working? I wasn't able to connect to it a little while ago? Gary

2009-01-03, 16:38	#660
em99010pepe Sep 2004 2830₁₀ Posts	Please help to dry C6000 (k=341) because I won't be hosting anymore servers for NPLB.