20170423, 21:33  #1 
Dec 2012
The Netherlands
2^{4}·89 Posts 
Basic Number Theory 20: polynomials
Polynomials are used constantly in Number Theory, so it is important to understand them thoroughly.
Example Let \(a,b,c,r,s,t\) be real numbers and define functions \(f,g:\mathbb{R}\rightarrow\mathbb{R}\) by \[ f(x)=ax^2+bx+c\mbox{ and }g(x)=rx^2+sx+t. \] If \(a=r,b=s\) and \(c=t\) then \(f(x)=g(x)\) for all \(x\in\mathbb{R}\) (and both functions have the same domain and codomain) so \(f=g\). What about the converse  if \(f=g\) (and therefore \(f(x)=g(x)\) for all \(x\in\mathbb{R}\)), does it follow that \(a=r,b=s\) and \(c=t\)? One way to answer this is with a little calculus. If we differentiate \(f\), we get the function \(f'\) given by \(f'(x)=2ax+b\) and, differentiating again, we get \(f''\) given by \(f''(x)=2a\) (a constant function). Similarly the functions \(g'\) and \(g''\) are given by \(g'(x)=2rx+s\) and \(g''(x)=2r\). If \(f=g\) then \(f'=g'\) and \(f''=g''\) so, in particular, \[\begin{eqnarray*} c & = & f(0)=g(0)=t \\ b & = & f'(0)=g'(0)=s \\ a & = & \frac{1}{2}f''(0)=\frac{1}{2}g''(0)=r. \end{eqnarray*}\] Thus \(f=g\) if and only if \(a=r,b=s\) and \(c=t\) but in order to prove this we relied upon the fact that we were working in the real numbers. Example Let \(R=\mathbb{Z}/2\mathbb{Z}\) (the set of integers modulo 2) and define functions \(f,g:R\rightarrow R\) by \[ f(x)=x^2\mbox{ and }g(x)=x. \] The integers modulo 2 are just \(\bar{0}\) and \(\bar{1}\), and we have \(\bar{0}^2=\bar{0}\) and \(\bar{1}^2=\bar{1}\), so \(f(x)=g(x)\) for all \(x\in R\) hence \(f=g\). In this case, the two distinct polynomials \(x^2\) and \(x\) gave us the same function. Proposition 112 Let \(R\) be an infinite integral domain, \(m,n\) nonnegative integers and \(a_0,a_1,\ldots,a_n\) and \(b_0,b_1,\ldots,b_m\) elements of \(R\). Define \(a_i=0\) for all integers \(i>n\) and \(b_i=0\) for all \(b>m\). Let \(f,g:R\rightarrow R\) be the functions given by \[ \begin{eqnarray*} f(x) & = & a_0+a_1x+a_2x^2+a_3x^3+\ldots +a_nx^n \\ g(x) & = & b_0+b_1x+b_2x^2+b_3x^3+\ldots +b_mx^m. \end{eqnarray*} \] If \(f=g\) then it follows for all integers \(i\geq 0\) that \(a_i=b_i\). proof Let \(k\) be the maximum of \(m\) and \(n\), and \(h:R\rightarrow R\) the function given by \[ h(x)=(a_0b_0)+(a_1b_1)x+(a_2b_2)x^2+\ldots +(a_kb_k)x^k. \] Suppose there exists \(j\in \{0,1,\ldots,k\}\) for which \(a_j\neq b_j\), choosing \(j\) as large as possible. If \(j>0\) then, by proposition 60, there are at most \(j\) values of \(x\) for which \(h(x)=0\). But \(R\) is infinite, so there exists \(x\in R\) with \(h(x)\neq 0\) and therefore \(f(x)\neq g(x)\). If instead \(j=0\) then \(h(0)\neq 0\) so \(f(0)\neq g(0)\). It follows that if \(f=g\) then no such \(j\) exists, hence \(a_i=b_i\) for all integers \(i\geq 0\). ∎ Proposition 113 Let \(R\) be a finite ring and, for each positive integer \(n\), let \(f_n:R\rightarrow R\) be the function given by \(f_n(x)=x^n\). Then there exist positive integers \(i,j\) such that \(i\neq j\) but \(f_i=f_j\). proof Let \(n\) be the number of elements in the finite ring \(R\). Then there are only \(n^n\) distinct functions from \(R\) to itself (we only have \(n\) options for the image of each element) so the functions \(f_1,f_2,\ldots,f_{n^n+1}\) cannot all be different. Hence there exist \(i,j\) such that \(i\neq j\) but \(f_i=f_j\). ∎ In general, therefore, distinct polynomials may give us the same function. So our rigorous definition of what a polynomial actually is cannot make use of these functions  we must find a different approach. Let \(R\) be a ring. A sequence in \(R\) is a list of elements of \(R\) indexed by the nonnegative integers: \[ a_0,a_1,a_2,a_3,\ldots \] (it corresponds with a function \(a:\mathbb{N}\rightarrow R\)). Sequences are by definition infinitely long, and the same element is allowed to appear more than once. For each \(i\in\mathbb{N}\), the element \(a_i\in R\) is called a term in the sequence. We denote the entire sequence by giving the \(i\)th term in brackets: \((a_i)_{i\in\mathbb{N}}\) or simply \((a_i)\). For example, we write \((2i+1)_{i\in\mathbb{N}}\) for the sequence \[ 1,3,5,7,9,11,\ldots \] Sequences \((a_i)_{i\in\mathbb{N}}\) and \((b_i)_{i\in\mathbb{N}}\) in \(R\) are equal if and only if the corresponding terms are equal, i.e. \(a_i=b_i\) for all \(i\in\mathbb{N}\). A polynomial over \(R\) is a sequence in \(R\) with only finitely many nonzero terms. Thus, if \((a_i)_{i\in\mathbb{N}}\) is a polynomial over \(R\) then there exists an integer \(n\geq 0\) such that, for all \(i>n\), \(a_i=0\). Let \((a_i)_{i\in\mathbb{N}}\) and \((b_i)_{i\in\mathbb{N}}\) be polynomials over \(R\). We produce their sum by adding together corresponding terms, i.e. we define \[ (a_i)_{i\in\mathbb{N}}+(b_i)_{i\in\mathbb{N}}=(c_i)_{i\in\mathbb{N}} \mbox{ where }c_i=a_i+b_i\mbox{ for each }i\in\mathbb{N}. \] It is easy to see that the resulting sequence has only finitely many nonzero terms, so that the sum of two polynomials is again a polynomial. Now let \(c_0=a_0b_0\), \(c_1=a_0b_1+a_1b_0\), \(c_2=a_0b_2+a_1b_1+a_2c_0\) and in general, for each nonnegative integer \(k\), let \(c_k=\sum_{i=0}^ka_ib_{ki}\). Then the product of the polynomials \((a_i)_{i\in\mathbb{N}}\) and \((b_i)_{i\in\mathbb{N}}\) is defined by \[ (a_i)_{i\in\mathbb{N}}(b_i)_{i\in\mathbb{N}}=(c_i)_{i\in\mathbb{N}}. \] There exist nonnegative integers \(m,n\) such that \(a_i=0\) for all \(i>n\) and \(b_i=0\) for all \(i>m\). Take any integer \(k>m+n\). For all \(i\in\{0,1,\ldots,k\}\), if \(i>n\) then \(a_i=0\) and otherwise \(ki>m\) so \(b_{ki}=0\), hence \(c_k=0\). Thus the product of two polynomials is also a polynomial. Proposition 114 Let \(R\) be a ring. Then the set of all polynomials over \(R\) with addition and multiplication as defined above also forms a ring. proof Let \(S\) be the set of all polynomials over \(R\). As we add polynomials together term by term, the ring axioms for addition in \(S\) follow directly from the corresponding properties in \(R\). The neutral element is \((0)_{i\in\mathbb{N}}\) (i.e. the sequence \(0,0,0,\ldots\)) and, for each \((a_i)_{i\in\mathbb{N}}\in S\), its inverse under addition is \((a_i)_{i\in\mathbb{N}}\). The neutral element of \(S\) under multiplication is \(1,0,0,0,\ldots\). Take any \((a_i)_{i\in\mathbb{N}},(b_i)_{i\in\mathbb{N}}\) and \((c_i)_{i\in\mathbb{N}}\in S\). We shall abbreviate these to \(a,b\) and \(c\) respectively. For any nonnegative integer \(j\), we shall write \([ab]_j\) for the \(j\)th term of the sequence obtained by multiplying the sequences \(a\) and \(b\) together, and similarly for other sums and products. Take any \(m\in\mathbb{N}\). Let \(X_2\) be the set of all ordered pairs \((i,j)\) of nonnegative integers with \(i+j=m\), and \(X_3\) the set of all ordered triples \((i,j,k)\) of nonnegative integers with \(i+j+k=m\). Then (using associativity of multiplication in \(R\)) \[ [(ab)c]_m=\sum_{(j,k)\in X_2}[ab]_jc_k =\sum_{(i,j,k)\in X_3}a_ib_jc_k=\sum_{(i,j)\in X_2}a_i[bc]_j=[a(bc)]_m \] hence multiplication in \(S\) is associative. Also, using distributivity in \(R\), \[\begin{eqnarray*} [a(b+c)]_m & = & \sum_{i=0}^ma_i[b+c]_{mi}=\sum_{i=0}^ma_i(b_{mi}+c_{mi}) \\ & = & \sum_{i=0}^m(a_ib_{mi}+a_ic_{mi}) =\sum_{i=0}^ma_ib_{mi}+\sum_{i=0}^ma_ic_{mi} \\ & = & [ab]_m+[ac]_m=[ab+ac]_m \end{eqnarray*}\] and similarly \((a+b)c=ac+bc\). It follows that \(S\) is a ring under the given addition and multiplication. ∎ Notation Let \(R\) be a ring, and \(S\) the set of all polynomials over \(R\). For any \(a,b\in R\), the sum of the sequences \(a,0,0,0,\ldots\) and \(b,0,0,0,\ldots\) is the sequence \(a+b,0,0,0,\ldots\), while their product is \(ab,0,0,0,\ldots\). The neutral element of \(S\) under addition (its zero) is the sequence \(0,0,0,0,\ldots\) while the neutral element under multiplication (its one) is \(1,0,0,0,\ldots\). Thus the polynomials in which all terms after the first are zero behave exactly like the elements of \(R\). For each \(a\in R\), we may therefore write the polynomial \(a,0,0,0\ldots\) simply as \(a\). These polynomials are called the constant polynomials, and identifying them with the elements of \(R\) makes \(R\) into a subring of \(S\). We write \(X\) for the polynomial \(0,1,0,0,0,\ldots\). (Choose some other symbol if you are already using \(X\) for something.) It then follows that \(X^2\) is the sequence \(0,0,1,0,0,0,\ldots\), \(X^3\) is \(0,0,0,1,0,0,0,\ldots\), etc. So, for any nonnegative integer \(n\) and any elements \(a_0,a_1,\ldots,a_n\in R\), the polynomial \(a_0,a_1,a_2,\ldots,a_n,0,0,0,\ldots\) can be written as \(a_0+a_1X+a_2X^2+\ldots +a_nX^n\), and this is the standard notation for it. We write \(R[X]\) for the set \(S\) of all polynomials over \(R\). Let \(f\in R[X]\) with \(f\neq 0\). Then \(f=a_0+a_1X+a_2X^2+\ldots +a_nX^n\) for some integer \(n\geq 0\) and some \(a_0,a_1,\ldots,a_n\in R\), and we may choose \(n\) so that \(a_n\neq 0\). We call the elements \(a_0,a_1,\ldots,a_n\) the coefficients of \(f\), and \(n\) is called the degree of \(f\), written \(\deg(f)\). We call \(a_n\) the leading coefficient of \(f\), and say that \(f\) is monic if its leading coefficient is 1. (In the case \(f=0\), some people define the degree of \(f\) to be \(1\) or \(\infty\), while others leave it undefined.) Thus the constant polynomials are the polynomials of degree 0 together with the zero polynomial. Example \(X^23X+5\in\mathbb{Z}[X]\) has degree 2 and leading coefficient 1, so it is monic. Proposition 115 Let \(R\) be an integral domain. Then i) for all \(f,g\in R[X]\setminus\{0\}\), \(\deg(fg)=\deg(f)+\deg(g)\); ii) \(R[X]\) is also an integral domain, and iii) \(R[X]^*=R^*\). proof i) Take any \(f,g\in R[X]\setminus\{0\}\). Then \[ f=a_0+a_1X+a_2X^2+\ldots +a_nX^n\mbox{ and } g=b_0+b_1X+b_2X^2+\ldots +b_mX^m \] for some nonnegative integers \(m,n\) and elements \(a_0,a_1,\ldots,a_n,b_0,b_1,\ldots,b_m\in R\). As \(f\neq 0\neq g\), we may choose these so that \(a_n\neq 0\neq b_m\), and then \(\deg(f)=n\) and \(\deg(g)=m\). Define \(a_i=0\) for all integers \(i>n\) and similarly \(b_i=0\) for all \(i>m\). For each \(k\in\mathbb{N}\), let \(c_k=\sum_{i=0}^ka_ib_{ki}\). Then, for all integers \(k>m+n\), \(c_k=0\) (shown above when we defined the product of polynomials). And \(c_{m+n}=a_nb_m\neq 0\) as \(R\) is an integral domain,hence \(fg\neq 0\) and \(\deg(fg)=m+n=\deg(f)+\deg(g)\). ii) Still using the notation from part (i) above, we have for all \(i,j\in\mathbb{N}\) that \(a_ib_j=b_ja_i\) (as \(R\) is a commutative ring) and it follows for each \(k\in\mathbb{N}\) that \(\sum_{i=0}^ka_ib_{ki}=\sum_{i=0}^kb_ia_{ki}\) hence \(fg=gf\). Thus \(R[X]\) is a commutative ring. The constant polynomials in \(R[X]\) correspond with the elements of \(R\), and \(1\neq 0\) in \(R\) so \(1\neq 0\) in \(R[X]\) too. Moreover, we saw in part (i) that \(R[X]\) has no zero divisors. Hence \(R[X]\) is an integral domain. iii) For any \(u\in R^*\), there exists \(v\in R\) with \(uv=vu=1\). As \(R\) is a subring of \(R[X]\), we have \(uv=vu=1\) in \(R[X]\), too (viewing \(u,v\) as constant polynomials) so \(u\in R[X]^*\). Thus \(R^*\subset R[X]^*\). Conversely, for any \(f\in R[X]^*\), there exists \(g\in R[X]\) with \(fg=gf=1\) so, by part (i) above, \(\deg(f)+\deg(g)=\deg(1)=0\). As the degree of a polynomial is nonnegative, it follows that \(\deg(f)=\deg(0)=0\). Thus \(f\) and \(g\) are both constant polynomials, behaving like the corresponding elements of \(R\) hence \(f\in R^*\) as well. It follows that \(R[X]^*\subset R^*\) too, and therefore \(R[X]^*=R^*\). ∎ Just as with the (rational) integers and Gaussian integers, division with remainder is important for polynomials. Proposition 116 Let \(R\) be a ring and \(f,g\in R[X]\) with \(g\neq 0\) and \(g\)'s leading coefficient a unit in \(R\). Then there exist unique \(q,r\in R[X]\) such that \(f=qg+r\) and either \(r=0\) or \(\deg(r)<\deg(g)\). proof EXISTENCE If \(f=0\) then putting \(q=r=0\) suffices. Otherwise, \[ f=a_0+a_1X+a_2X^2+\ldots +a_nX^n\mbox{ and } g=b_0+b_1X+b_2X^2+\ldots +b_mX^m \] where \(n=\deg(f)\), \(m=\deg(g)\) and \(a_0,\ldots,a_n,b_0\ldots,b_m\in R\) with \(a_n\neq 0\) and \(b_m\in R^*\), so \(b_mc=cb_m=1\) for some \(c\in R\). Induction on \(n\). In the case \(n=0\), if \(m>0\) then putting \(q=0\) and \(r=f\) suffices. If \(m=0\) too, let \(q=a_0c\) and \(r=0\). Then \(qg+r=a_0cb_0+0=a_0=f\) (and \(r=0\)). Take any integer \(N>0\) and suppose existence holds for all \(n\in\mathbb{N}\) with \(n<N\). In the case \(n=N\), if \(m>n\) then we can put \(q=0\) and \(r=f\) as before. Suppose instead that \(m\leq n\), and let \(h=f(a_ncX^{nm})g\). Then the coefficient of \(X^n\) in \(h\) is 0 so \(h=0\) or \(\deg(h)<n\) and thus, by our assumption, there exist \(q',r\in R[X]\) such that \(h=q'g+r\) and either \(r=0\) or \(\deg(r)<\deg(g)\). Let \(q=q'+a_ncX^{nm}\). Then \(f=qg+r\) with \(r=0\) or \(\deg(r)<\deg(g)\) as required. By induction, existence holds for all nonnegative integers \(n\). UNIQUENESS Suppose \(f=qg+r\) and \(f=q'g+r'\) with \(r=0\) or \(\deg(r)<\deg(g)\) and similarly for \(r'\). Then \(rr'=(q'q)g\) with \(rr'=0\) or \(\deg(rr')<\deg(g)\). Suppose \(q'q\neq 0\). As the leading coefficient of \(g\) is a unit, it cannot be a zero divisor, and it follows that \((q'q)g\neq 0\) with \(\deg((q'q)g)\geq\deg(g)\). But \((q'q)g=rr'\) so then \(rr'\neq 0\) too and \(\deg(rr')<\deg(g)\), which is a CONTRADICTION. Hence \(q'q=0\) giving \(q'=q\) and \(r'=r\). ∎ In particular, if \(R\) is a field then \(R^*=R\setminus\{0\}\) (exercise 89) so we can divide by any nonzero polynomial over \(R\), getting a quotient and remainder. Example Long division for polynomials: divide \(f=5x^33x^2+8\) by \(g=x+2\in\mathbb{Z}[X]\). The leading coefficient of \(g\) is the unit 1, so division with remainder is possible. First insert the missing power of \(x\): \(f=5x^33x^2+0x+8\). Step 1: Dividing the leading term \(5x^3\) of \(f\) by the leading term \(x\) of \(g\), we get \(5x^2\), which we put as the leading term of the quotient. Multiplying it by \(q=x+2\), we get \(5x^3+10x^2\), which we subtract from \(f=5x^33x^2+0x+8\) to get the remainder \(r_1=13x^2+0x+8\) after step 1. Step 2: Dividing the leading term \(13x^2\) of \(r_1\) by the leading term \(x\) of \(q\), we get \(13x\), which we put as the next term of the quotient. Multiplying it by \(q=x+2\), we get \(13x^226x\), which we subtract to get the remainder \(r_2=26x+8\) after step 2. Step 3:We divide the leading term \(26x\) of the remainder \(r_2\) by the leading term \(x\) of \(q\), getting 26, which we put as the next term of the quotient. We multiply it by \(q\), getting \(26x+52\), which we subtract to get the remainder \(r_3=44\) after step 3. Conclusion: the quotient is \(5x^213x+26\) and the remainder is 44, i.e. \(5x^33x^2+8=(5x^213x+26)(x+2)44\). Let \(R\) be a ring and \(f\in R[X]\). Then \(f=a_0+a_1X+a_2X^2+\ldots +a_nX^n\) for some integer \(n\geq 0\) and some \(a_0,a_1,\ldots,a_n\in R\). Let \(S\) be a ring with \(R\) as a subring (possibly with \(S=R\)). For any element \(c\in S\), we define the evaluation of \(f\) at \(c\) by \[ f(c)=a_0+a_1c+a_2c^2+\ldots +a_nc^n\in S. \] Examples Let \(f=X^23X+2\in\mathbb{Z}[X]\). Then \[\begin{eqnarray*} f(0) & = & 2\in\mathbb{Z} \\ f(1) & = & 0\in\mathbb{Z} \\ f\left(\frac{1}{2}\right) & = & \frac{3}{4}\in\mathbb{Q} \\ f(X+1) & = & X^2X\in\mathbb{Z}[X] \end{eqnarray*} \] Proposition 117 Let \(R\) be a ring, \(a\in R\) and \(f\in R[X]\). Then the unique remainder on dividing \(f\) by \(Xa\) is \(f(a)\). proof Write \(f=b_0+b_1X+b_2X^2+\ldots +b_nX^n\) where \(n\in\mathbb{N}\) and \(b_0,b_1,\ldots,b_n\in R\). Then \(ff(a)=b_1(Xa)+b_2(X^2a^2)+\ldots +b_n(X^na^n)\). For each integer \(m\geq 1\), define \[ h_m=X^{m1}+aX^{m2}+a^2X^{m3}+\ldots +a^{m2}X+a^{m1}\in R[X] \] and let \(q=b_1h_1+b_2h_2+\ldots +b_nh_n\). Then for all \(m\geq 1\) we have \(X^ma^m=h_m\cdot (Xa)\) and hence \(f=q\cdot (Xa)+f(a)\). ∎ For any ring \(R\), we call \(a\in R\) a zero or root of \(f\in R[X]\) if \(f(a)=0\). Exercises 91. Let \(R\) be a ring (not necessarily commutative). Show that \(X\cdot f=f\cdot X\) for all \(f\in R[X]\). 92. Let \(p\) be a prime number, \(R=\mathbb{Z}/p\mathbb{Z}\) and \(f=X^pX\in R[X]\). Show that every \(x\in R\) is a zero of \(f\). 93. Let \(R\) be an integral domain, \(f\in R[X]\), \(n\geq 1\) an integer and \(a_1,a_2,\ldots,a_n\) distinct zeroes of \(f\). Show there exists \(q\in R[X]\) such that \(f=q(Xa_1)(Xa_2)\ldots (Xa_n)\). 94. Show that every function from \(\mathbb{Z}/3\mathbb{Z}\) to itself can be specified using a polynomial of degree at most 2 (or the zero polynomial). Last fiddled with by Nick on 20170423 at 21:48 Reason: Typo 
20170425, 04:16  #2 
Romulan Interpreter
Jun 2011
Thailand
5×11×157 Posts 
Going to differentiation may be a bit tricky and not exactly "elementary" (as we learn polynomials in school much earlier than differentiation). One simpler way is to express the two in zero, getting \(c=t\), then express them in 1 and 1 (or 2, etc) and get \(b=s\), \(a=r\) etc.
We have: \( f(0)=g(0),\ \ \text{i.e.}\ \ a\cdot 0^2+b\cdot 0+c=r\cdot 0^2+s\cdot 0+t\) from which \(s=t\), then express them in 1 and eliminate t=c from the both sides:\( f(1)=g(1),\ \ \text{i.e.}\ \ a\cdot 1^2+b\cdot 1+c=r\cdot 0^2+s\cdot 0+t\) or \(a+b=r+s\). Doing the same for 1, we get \(ab=rs\) and now we add them together or subtract them together, and get a=r and b=s. This also proves that it is enough for two polynomials of degree n to be the same in n+1 values (as they have n+1 coefficients), to be the same in all their domain. (i.e. if two polynomials of degree n in R have the same values in n+1 points, they are the same in all R, following a similar procedure, and induction). Again, congratulations for your effort and for your patience to write another excellent and educative post! Last fiddled with by LaurV on 20170425 at 04:32 Reason: fixing \tex thingies 
20170425, 07:14  #3  
Dec 2012
The Netherlands
2^{4}×89 Posts 
Thanks for the tip and the additional explanation! Quote:


20170425, 08:44  #4  
Romulan Interpreter
Jun 2011
Thailand
5·11·157 Posts 
Quote:
\( f(1)=g(1),\ \ \text{i.e.}\ \ a\cdot 1^2+b\cdot 1+c=r\cdot 1^2+s\cdot 1+t\) Last fiddled with by LaurV on 20170425 at 08:46 

20170425, 14:12  #5 
"Matthew Anderson"
Dec 2010
Oregon, USA
1001010100_{2} Posts 
Hi Mersenneforum,
With respect to exercise 94, 94. Show that every function from to itself can be specified using a polynomial of degree at most 2 (or the zero polynomial). I want to clarify, when you write that we want a function 'to itself' we can assume that The domain and the range are the same set? For example suppose f(0)=0, f(1) = 1 and f(2) = 1. This would not meet the criterion for exercise 94, right? I assume the domain is {0,1,2} and the range is the same. I see '3 choose 2' or 6 cases that need to be considered for 94. Thank you, Nick for taking the time to write this up and put it on the internet. Regards, Matt Last fiddled with by MattcAnderson on 20170425 at 14:17 Reason: not good ta TEK, I didn't count cases right. 
20170425, 14:32  #6 
Dec 2012
The Netherlands
2620_{8} Posts 
Hi Matt,
I meant that the codomain is {0,1,2}, so the range can be the same or it can be any subset of that. Your example with f(0)=0, f(1)=1 and f(2)=1 does count as one of the functions that is allowed. Clearly I didn't formulate the question accurately enough  thanks for asking about it! 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Basic Number Theory 1 & 2  Nick  Number Theory Discussion Group  17  20171223 20:10 
Basic Number Theory 14: a first look at groups  Nick  Number Theory Discussion Group  0  20161229 13:47 
Basic Number Theory 12: sums of two squares  Nick  Number Theory Discussion Group  0  20161211 11:30 
Basic Number Theory 11: Gaussian primes  Nick  Number Theory Discussion Group  0  20161203 11:42 
Basic Number Theory 3: gcd, lcm & Euclid's algorithm  Nick  Number Theory Discussion Group  5  20161008 09:05 