mersenneforum.org  

Go Back   mersenneforum.org > Great Internet Mersenne Prime Search > Hardware

Reply
 
Thread Tools
Old 2010-03-20, 02:03   #1
joblack
 
joblack's Avatar
 
Oct 2008
n00bville

52×29 Posts
Default Hardware Benchmark Jest Thread for 100M exponents

I thought about starting a hardware benchmark test thread so everybody can publish the time the exponent 332220523 would need to complete.

Here is mine for a Q6600 at 2,8 GhZ, Debian Linux 64 Bit:

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2798.364
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips : 5596.34
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

our choice: [Main thread Mar 20 03:00] Starting worker.
[Work thread Mar 20 03:00] Worker starting
[Work thread Mar 20 03:00] Setting affinity to run worker on logical CPU #0
[Work thread Mar 20 03:00] Using FFT length 20M
[Work thread Mar 20 03:00] p: 332220523. Time: 503.993 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 496.540 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 497.273 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 495.524 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 497.383 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 495.369 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 495.732 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 496.274 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 496.183 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 493.874 ms.
[Work thread Mar 20 03:00] Iterations: 10. Total time: 4.968 sec.
[Work thread Mar 20 03:00] Estimated time to complete this exponent: 1910 days, 7 hours, 46 minutes.
[Work thread Mar 20 03:00] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 03:00] Using FFT length 20M, 2 threads
[Work thread Mar 20 03:00] p: 332220523. Time: 273.869 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 278.915 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 275.324 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 276.745 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 277.642 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 276.947 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 275.177 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 275.884 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 276.661 ms.
[Work thread Mar 20 03:00] p: 332220523. Time: 275.281 ms.
[Work thread Mar 20 03:00] Iterations: 10. Total time: 2.762 sec.
[Work thread Mar 20 03:00] Estimated time to complete this exponent: 1062 days, 4 hours, 48 minutes.
[Work thread Mar 20 03:00] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 20 03:00] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 03:00] Using FFT length 20M, 3 threads
[Work thread Mar 20 03:00] p: 332220523. Time: 250.555 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 278.289 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 257.689 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 257.565 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 260.412 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 261.199 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 274.520 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 256.301 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 258.146 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 258.564 ms.
[Work thread Mar 20 03:01] Iterations: 10. Total time: 2.613 sec.
[Work thread Mar 20 03:01] Estimated time to complete this exponent: 1004 days, 19 hours, 53 minutes.
[Work thread Mar 20 03:01] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 20 03:01] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 20 03:01] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 03:01] Using FFT length 20M, 4 threads
[Work thread Mar 20 03:01] p: 332220523. Time: 225.686 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 319.053 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 231.242 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 232.394 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 229.474 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 235.700 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 232.919 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 231.852 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 360.888 ms.
[Work thread Mar 20 03:01] p: 332220523. Time: 232.462 ms.
[Work thread Mar 20 03:01] Iterations: 10. Total time: 2.532 sec.
[Work thread Mar 20 03:01] Estimated time to complete this exponent: 973 days, 11 hours, 7 minutes.
[Work thread Mar 20 03:01] Worker stopped.

---

How about spending 5 minutes and sharing your benchmark results for your cpu/pc-configuration?

Last fiddled with by joblack on 2010-03-20 at 02:05
joblack is offline   Reply With Quote
Old 2010-03-20, 03:15   #2
petrw1
1976 Toyota Corona years forever!
 
petrw1's Avatar
 
"Wayne"
Nov 2006
Saskatchewan, Canada

3·5·172 Posts
Default PIV

Code:
Intel(R) Pentium(R) 4 CPU 2.80GHz
CPU speed: 2792.96 MHz
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2
L1 cache size: 16 KB
L2 cache size: 1 MB
L1 cache line size: 64 bytes
L2 cache line size: 128 bytes
TLBS: 64
Prime95 32-bit version 25.9, RdtscTiming=1
Code:
[Mar 19 21:09] Worker starting
[Mar 19 21:09] Using FFT length 20M
[Mar 19 21:09] p: 332220523.  Time: 1150.691 ms.
[Mar 19 21:09] p: 332220523.  Time: 1150.621 ms.
[Mar 19 21:09] p: 332220523.  Time: 1163.342 ms.
[Mar 19 21:09] p: 332220523.  Time: 1151.318 ms.
[Mar 19 21:09] p: 332220523.  Time: 1147.939 ms.
[Mar 19 21:09] Iterations: 5.  Total time: 5.764 sec.
[Mar 19 21:09] Estimated time to complete this exponent: 4432 days, 14 hours, 44 minutes.
OVER 12 years

Last fiddled with by petrw1 on 2010-03-20 at 03:28
petrw1 is offline   Reply With Quote
Old 2010-03-20, 03:27   #3
petrw1
1976 Toyota Corona years forever!
 
petrw1's Avatar
 
"Wayne"
Nov 2006
Saskatchewan, Canada

3×5×172 Posts
Default i7-750

Code:
Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
CPU speed: 3199.96 MHz, 4 cores
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2, SSE4
L1 cache size: 32 KB
L2 cache size: 256 KB, L3 cache size: 8 MB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
TLBS: 64
Prime95 64-bit version 25.9, RdtscTiming=1
Code:
[Mar 19 21:17] Worker starting
[Mar 19 21:17] Setting affinity to run worker on logical CPU #0
[Mar 19 21:18] Using FFT length 20M
[Mar 19 21:18] p: 332220523.  Time: 445.113 ms.
[Mar 19 21:18] p: 332220523.  Time: 445.240 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.573 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.968 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.789 ms.
[Mar 19 21:18] p: 332220523.  Time: 445.050 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.754 ms.
[Mar 19 21:18] p: 332220523.  Time: 447.673 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.888 ms.
[Mar 19 21:18] p: 332220523.  Time: 444.592 ms.
[Mar 19 21:18] Iterations: 10.  Total time: 4.452 sec.
[Mar 19 21:18] Estimated time to complete this exponent: 1711 days, 17 hours, 16 minutes.
[Mar 19 21:18] Setting affinity to run helper thread 1 on logical CPU #1
[Mar 19 21:18] Using FFT length 20M, 2 threads
[Mar 19 21:18] p: 332220523.  Time: 226.382 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.859 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.541 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.736 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.627 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.787 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.612 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.556 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.601 ms.
[Mar 19 21:18] p: 332220523.  Time: 226.766 ms.
[Mar 19 21:18] Iterations: 10.  Total time: 2.266 sec.
[Mar 19 21:18] Estimated time to complete this exponent: 871 days, 11 hours, 44 minutes.
[Mar 19 21:18] Setting affinity to run helper thread 1 on logical CPU #1
[Mar 19 21:18] Setting affinity to run helper thread 2 on logical CPU #2
[Mar 19 21:18] Using FFT length 20M, 3 threads
[Mar 19 21:18] p: 332220523.  Time: 155.489 ms.
[Mar 19 21:18] p: 332220523.  Time: 156.294 ms.
[Mar 19 21:18] p: 332220523.  Time: 155.382 ms.
[Mar 19 21:18] p: 332220523.  Time: 155.255 ms.
[Mar 19 21:18] p: 332220523.  Time: 156.264 ms.
[Mar 19 21:18] p: 332220523.  Time: 156.939 ms.
[Mar 19 21:18] p: 332220523.  Time: 156.593 ms.
[Mar 19 21:18] p: 332220523.  Time: 157.089 ms.
[Mar 19 21:18] p: 332220523.  Time: 156.448 ms.
[Mar 19 21:18] p: 332220523.  Time: 157.608 ms.
[Mar 19 21:18] Iterations: 10.  Total time: 1.563 sec.
[Mar 19 21:18] Estimated time to complete this exponent: 601 days, 3 hours, 15 minutes.
[Mar 19 21:18] Setting affinity to run helper thread 1 on logical CPU #1
[Mar 19 21:18] Setting affinity to run helper thread 2 on logical CPU #2
[Mar 19 21:18] Setting affinity to run helper thread 3 on logical CPU #3
[Mar 19 21:18] Using FFT length 20M, 4 threads
[Mar 19 21:18] p: 332220523.  Time: 122.577 ms.
[Mar 19 21:18] p: 332220523.  Time: 212.727 ms.
[Mar 19 21:18] p: 332220523.  Time: 179.723 ms.
[Mar 19 21:18] p: 332220523.  Time: 124.202 ms.
[Mar 19 21:18] p: 332220523.  Time: 123.249 ms.
[Mar 19 21:18] p: 332220523.  Time: 124.580 ms.
[Mar 19 21:18] p: 332220523.  Time: 122.660 ms.
[Mar 19 21:18] p: 332220523.  Time: 122.831 ms.
[Mar 19 21:18] p: 332220523.  Time: 124.681 ms.
[Mar 19 21:18] p: 332220523.  Time: 125.986 ms.
[Mar 19 21:18] Iterations: 10.  Total time: 1.383 sec.
[Mar 19 21:18] Estimated time to complete this exponent: 531 days, 20 hours, 47 minutes.
Cores / Years
1 / 4.69
2 / 2.39 = 2% loss
3 / 1.65 = 5.5% loss
4 / 1.45 = 20% loss

Darn good performance even with 3 cores and not bad with all 4.
petrw1 is offline   Reply With Quote
Old 2010-03-20, 03:33   #4
joblack
 
joblack's Avatar
 
Oct 2008
n00bville

10110101012 Posts
Default

Quote:
Originally Posted by petrw1 View Post
Code:
Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
CPU speed: 3199.96 MHz, 4 cores
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2, SSE4
L1 cache size: 32 KB
L2 cache size: 256 KB, L3 cache size: 8 MB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
TLBS: 64
Prime95 64-bit version 25.9, RdtscTiming=1
[code][Mar 19 21:17] Worker starting
1 / 4.69
2 / 2.39 = 2% loss
3 / 1.65 = 5.5% loss
4 / 1.45 = 20% loss

Darn good performance even with 3 cores and not bad with all 4.
Wow the i750 performs very well ... the old Qxxxx architecture seems to have some memory speed problems.

I need one of these babies *hehe*

Last fiddled with by joblack on 2010-03-20 at 03:35
joblack is offline   Reply With Quote
Old 2010-03-20, 03:45   #5
axn
 
axn's Avatar
 
Jun 2003

110738 Posts
Default

Code:
AMD Athlon(tm) II X4 630 Processor
CPU speed: 2799.96 MHz, 4 cores
CPU features: RDTSC, CMOV, Prefetch, 3DNow!, MMX, SSE, SSE2
L1 cache size: 64 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 48
L2 TLBS: 512
Code:
[Main thread Mar 19 22:41] Mersenne number primality test program version 25.9
[Main thread Mar 19 22:42] Starting worker.
[Worker #1 Mar 19 22:42] Worker starting
[Worker #1 Mar 19 22:42] Setting affinity to run worker on logical CPU #0
[Worker #1 Mar 19 22:42] Using FFT length 20M
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 643.740 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 643.913 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.550 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.129 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 643.964 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.474 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.568 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.330 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 644.858 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 645.185 ms.
[Worker #1 Mar 19 22:42] Iterations: 10.  Total time: 6.444 sec.
[Worker #1 Mar 19 22:42] Estimated time to complete this exponent: 2477 days, 16 hours, 49 minutes.
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Mar 19 22:42] Using FFT length 20M, 2 threads
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 381.978 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 381.940 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 380.994 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 381.242 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 380.861 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 380.967 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 380.744 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 380.946 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 381.963 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 383.084 ms.
[Worker #1 Mar 19 22:42] Iterations: 10.  Total time: 3.815 sec.
[Worker #1 Mar 19 22:42] Estimated time to complete this exponent: 1466 days, 19 hours, 33 minutes.
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 Mar 19 22:42] Using FFT length 20M, 3 threads
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.054 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.968 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 268.083 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.813 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.834 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.971 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.713 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.994 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.832 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 266.990 ms.
[Worker #1 Mar 19 22:42] Iterations: 10.  Total time: 2.669 sec.
[Worker #1 Mar 19 22:42] Estimated time to complete this exponent: 1026 days, 8 hours, 46 minutes.
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 Mar 19 22:42] Setting affinity to run helper thread 3 on logical CPU #3
[Worker #1 Mar 19 22:42] Using FFT length 20M, 4 threads
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 218.261 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 216.028 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 216.649 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 218.416 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 218.341 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 217.924 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 216.336 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 216.599 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 216.193 ms.
[Worker #1 Mar 19 22:42] p: 332220523.  Time: 220.677 ms.
[Worker #1 Mar 19 22:42] Iterations: 10.  Total time: 2.175 sec.
[Worker #1 Mar 19 22:42] Estimated time to complete this exponent: 836 days, 11 hours, 33 minutes.
[Worker #1 Mar 19 22:42] Worker stopped.
axn is online now   Reply With Quote
Old 2010-03-20, 03:46   #6
joblack
 
joblack's Avatar
 
Oct 2008
n00bville

52×29 Posts
Default

Intel Notebook Processor T4300
Quote:
# of Cores 2
# of Threads 2
Clock Speed 2.1 GHz
L2 Cache 1 MB
FSB Speed 800 MHz
FSB Parity No
Instruction Set 64-bit
Embedded No
Supplemental SKU No
Lithography 45 nm
Max TDP 35 W
VID Voltage Range 1.050V-1.150V
Quote:
[Mar 20 04:42] Setting affinity to run worker on logical CPU #0
[Mar 20 04:43] Using FFT length 20M
[Mar 20 04:43] p: 332220523. Time: 772.118 ms.
[Mar 20 04:43] p: 332220523. Time: 773.332 ms.
[Mar 20 04:43] p: 332220523. Time: 778.230 ms.
[Mar 20 04:43] p: 332220523. Time: 775.825 ms.
[Mar 20 04:43] p: 332220523. Time: 772.483 ms.
[Mar 20 04:43] p: 332220523. Time: 773.948 ms.
[Mar 20 04:43] p: 332220523. Time: 772.818 ms.
[Mar 20 04:43] p: 332220523. Time: 776.491 ms.
[Mar 20 04:43] p: 332220523. Time: 772.271 ms.
[Mar 20 04:43] p: 332220523. Time: 773.072 ms.
[Mar 20 04:43] Iterations: 10. Total time: 7.741 sec.
[Mar 20 04:43] Estimated time to complete this exponent: 2976 days, 8 hours, 49 minutes.
[Mar 20 04:43] Setting affinity to run helper thread 1 on logical CPU #1
[Mar 20 04:43] Using FFT length 20M, 2 threads
[Mar 20 04:43] p: 332220523. Time: 626.283 ms.
[Mar 20 04:43] p: 332220523. Time: 633.600 ms.
[Mar 20 04:43] p: 332220523. Time: 631.024 ms.
[Mar 20 04:43] p: 332220523. Time: 626.261 ms.
[Mar 20 04:43] p: 332220523. Time: 624.352 ms.
[Mar 20 04:43] p: 332220523. Time: 631.618 ms.
[Mar 20 04:43] p: 332220523. Time: 627.086 ms.
[Mar 20 04:43] p: 332220523. Time: 635.505 ms.
[Mar 20 04:43] p: 332220523. Time: 628.150 ms.
[Mar 20 04:43] p: 332220523. Time: 628.147 ms.
[Mar 20 04:43] Iterations: 10. Total time: 6.292 sec.
[Mar 20 04:43] Estimated time to complete this exponent: 2419 days, 9 hours, 0 minutes.
[Mar 20 04:43] Worker stopped.
joblack is offline   Reply With Quote
Old 2010-03-20, 04:31   #7
retina
Undefined
 
retina's Avatar
 
"The unspeakable one"
Jun 2006
My evil lair

560810 Posts
Default

Pentium M 1300MHz, L1:32KB, L2:1MB (Banias)
Code:
Worker starting
Using FFT length 20M
p: 332220523.  Time: 3553.285 ms.
p: 332220523.  Time: 3560.040 ms.
p: 332220523.  Time: 3560.370 ms.
p: 332220523.  Time: 3601.315 ms.
p: 332220523.  Time: 3551.747 ms.
p: 332220523.  Time: 3554.326 ms.
p: 332220523.  Time: 3555.491 ms.
p: 332220523.  Time: 3556.184 ms.
p: 332220523.  Time: 3549.574 ms.
p: 332220523.  Time: 3553.664 ms.
Iterations: 10.  Total time: 35.596 sec.
Estimated time to complete this exponent: 13687 days, 4 hours, 12 minutes.
Worker stopped.
A little less than 37.5 years.
retina is online now   Reply With Quote
Old 2010-03-20, 04:43   #8
joblack
 
joblack's Avatar
 
Oct 2008
n00bville

10110101012 Posts
Default Intel Hex Core i7 980X @ 4.40 Ghz (stable)

Here`s an interesting benchmark dump from a youtube friend with his 980x. He has HT enabled so there could be a performance benefit without it.

Anyway, you probably can't get under 1 year :( ...

[Work thread Mar 19 23:31] p: 332220523. Time: 116.645 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 116.764 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 118.525 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 117.983 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 118.770 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 116.179 ms.
[Work thread Mar 19 23:31] Iterations: 10. Total time: 1.172 sec.
[Work thread Mar 19 23:31] Estimated time to complete this exponent: 450 days, 16 hours, 55 minutes.
[Work thread Mar 19 23:31] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 19 23:31] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 19 23:31] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 19 23:31] Setting affinity to run helper thread 4 on logical CPU #4
[Work thread Mar 19 23:31] Setting affinity to run helper thread 5 on logical CPU #5
[Work thread Mar 19 23:31] Setting affinity to run helper thread 6 on logical CPU #6
[Work thread Mar 19 23:31] Setting affinity to run helper thread 7 on logical CPU #7
[Work thread Mar 19 23:31] Setting affinity to run helper thread 8 on logical CPU #8
[Work thread Mar 19 23:31] Using FFT length 20M, 9 threads
[Work thread Mar 19 23:31] p: 332220523. Time: 110.594 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 110.951 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 117.803 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 116.671 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 111.271 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 110.792 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 109.781 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 111.768 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 111.675 ms.
[Work thread Mar 19 23:31] p: 332220523. Time: 110.913 ms.
[Work thread Mar 19 23:31] Iterations: 10. Total time: 1.122 sec.
[Work thread Mar 19 23:31] Estimated time to complete this exponent: 431 days, 12 hours, 13 minutes.
[Work thread Mar 19 23:32] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 19 23:32] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 19 23:32] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 19 23:32] Setting affinity to run helper thread 4 on logical CPU #4
[Work thread Mar 19 23:32] Setting affinity to run helper thread 7 on logical CPU #7
[Work thread Mar 19 23:32] Setting affinity to run helper thread 6 on logical CPU #6
[Work thread Mar 19 23:32] Setting affinity to run helper thread 5 on logical CPU #5
[Work thread Mar 19 23:32] Setting affinity to run helper thread 8 on logical CPU #8
[Work thread Mar 19 23:32] Setting affinity to run helper thread 9 on logical CPU #9
[Work thread Mar 19 23:32] Using FFT length 20M, 10 threads
[Work thread Mar 19 23:32] p: 332220523. Time: 115.012 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 114.149 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.360 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.017 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.796 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.586 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.048 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.777 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 116.805 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 116.708 ms.
[Work thread Mar 19 23:32] Iterations: 10. Total time: 1.155 sec.
[Work thread Mar 19 23:32] Estimated time to complete this exponent: 444 days, 5 hours, 7 minutes.
[Work thread Mar 19 23:32] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 19 23:32] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 19 23:32] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 19 23:32] Setting affinity to run helper thread 4 on logical CPU #4
[Work thread Mar 19 23:32] Setting affinity to run helper thread 5 on logical CPU #5
[Work thread Mar 19 23:32] Setting affinity to run helper thread 6 on logical CPU #6
[Work thread Mar 19 23:32] Setting affinity to run helper thread 7 on logical CPU #7
[Work thread Mar 19 23:32] Setting affinity to run helper thread 8 on logical CPU #8
[Work thread Mar 19 23:32] Setting affinity to run helper thread 9 on logical CPU #9
[Work thread Mar 19 23:32] Setting affinity to run helper thread 10 on logical CPU #10
[Work thread Mar 19 23:32] Using FFT length 20M, 11 threads
[Work thread Mar 19 23:32] p: 332220523. Time: 120.325 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 113.975 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 114.071 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 113.813 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 110.897 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 112.535 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 113.548 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 112.329 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 113.935 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 121.583 ms.
[Work thread Mar 19 23:32] Iterations: 10. Total time: 1.147 sec.
[Work thread Mar 19 23:32] Estimated time to complete this exponent: 441 days, 1 hour, 0 minutes.
[Work thread Mar 19 23:32] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 19 23:32] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 19 23:32] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 19 23:32] Setting affinity to run helper thread 4 on logical CPU #4
[Work thread Mar 19 23:32] Setting affinity to run helper thread 5 on logical CPU #5
[Work thread Mar 19 23:32] Setting affinity to run helper thread 6 on logical CPU #6
[Work thread Mar 19 23:32] Setting affinity to run helper thread 7 on logical CPU #7
[Work thread Mar 19 23:32] Setting affinity to run helper thread 8 on logical CPU #8
[Work thread Mar 19 23:32] Setting affinity to run helper thread 9 on logical CPU #9
[Work thread Mar 19 23:32] Setting affinity to run helper thread 10 on logical CPU #10
[Work thread Mar 19 23:32] Setting affinity to run helper thread 11 on logical CPU #11
[Work thread Mar 19 23:32] Using FFT length 20M, 12 threads
[Work thread Mar 19 23:32] p: 332220523. Time: 115.029 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 117.268 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 116.002 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.451 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.720 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.920 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.088 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.442 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 118.486 ms.
[Work thread Mar 19 23:32] p: 332220523. Time: 115.269 ms.
[Work thread Mar 19 23:32] Iterations: 10. Total time: 1.175 sec.
[Work thread Mar 19 23:32] Estimated time to complete this exponent: 451 days, 16 hours, 18 minutes.
[Work thread Mar 19 23:32] Worker stopped.
joblack is offline   Reply With Quote
Old 2010-03-20, 06:12   #9
Uncwilly
6809 > 6502
 
Uncwilly's Avatar
 
"""""""""""""""""""
Aug 2003
101×103 Posts

172×29 Posts
Default

Forgive my ignorance, but how did you get those timings? I tried doing "benchmarks" and it didn't allow me to specify the expo.
Uncwilly is offline   Reply With Quote
Old 2010-03-20, 10:04   #10
S485122
 
S485122's Avatar
 
Sep 2006
Brussels, Belgium

1,549 Posts
Default

Prime95
Menu "Advanced", item "Time"

Jacob
S485122 is offline   Reply With Quote
Old 2010-03-20, 11:58   #11
Mini-Geek
Account Deleted
 
Mini-Geek's Avatar
 
"Tim Sorbera"
Aug 2006
San Antonio, TX USA

17×251 Posts
Default Intel i5-750 @ 2.8 GHz

Code:
Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
CPU speed: 2673.34 MHz, 4 cores
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2, SSE4
L1 cache size: 32 KB
L2 cache size: 256 KB, L3 cache size: 8 MB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
TLBS: 64
Prime95 32-bit version 25.11, RdtscTiming=1
Prime95 reports it as 2.67 GHz, but the motherboard's automatic overclocking makes it 2.8 GHz. (current speed of Core 0, according to CPU-Z: 2807.0 MHz)
Code:
[Main thread Mar 20 06:53] Mersenne number primality test program version 25.11
[Main thread Mar 20 06:53] Starting worker.
[Work thread Mar 20 06:53] Worker starting
[Work thread Mar 20 06:53] Setting affinity to run worker on logical CPU #0
[Work thread Mar 20 06:54] Using FFT length 20M
[Work thread Mar 20 06:54] p: 332220523.  Time: 544.826 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 539.615 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 539.776 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 539.097 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 538.083 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 538.430 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 537.601 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 538.042 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 537.919 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 537.138 ms.
[Work thread Mar 20 06:54] Iterations: 10.  Total time: 5.391 sec.
[Work thread Mar 20 06:54] Estimated time to complete this exponent: 2072 days, 17 hours, 39 minutes.
[Work thread Mar 20 06:54] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 06:54] Using FFT length 20M, 2 threads
[Work thread Mar 20 06:54] p: 332220523.  Time: 272.055 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 297.308 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 278.438 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 272.116 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 277.769 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 272.004 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 287.325 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 270.689 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 274.496 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 280.333 ms.
[Work thread Mar 20 06:54] Iterations: 10.  Total time: 2.783 sec.
[Work thread Mar 20 06:54] Estimated time to complete this exponent: 1069 days, 22 hours, 11 minutes.
[Work thread Mar 20 06:54] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 06:54] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 20 06:54] Using FFT length 20M, 3 threads
[Work thread Mar 20 06:54] p: 332220523.  Time: 205.849 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 200.674 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 194.197 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 198.767 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 192.045 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 194.445 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 198.359 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 194.726 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 199.201 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 193.539 ms.
[Work thread Mar 20 06:54] Iterations: 10.  Total time: 1.972 sec.
[Work thread Mar 20 06:54] Estimated time to complete this exponent: 758 days, 4 hours, 28 minutes.
[Work thread Mar 20 06:54] Setting affinity to run helper thread 1 on logical CPU #1
[Work thread Mar 20 06:54] Setting affinity to run helper thread 2 on logical CPU #2
[Work thread Mar 20 06:54] Setting affinity to run helper thread 3 on logical CPU #3
[Work thread Mar 20 06:54] Using FFT length 20M, 4 threads
[Work thread Mar 20 06:54] p: 332220523.  Time: 155.920 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 148.639 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 152.623 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 165.372 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 148.186 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 152.587 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 148.614 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 150.555 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 164.632 ms.
[Work thread Mar 20 06:54] p: 332220523.  Time: 149.978 ms.
[Work thread Mar 20 06:54] Iterations: 10.  Total time: 1.537 sec.
[Work thread Mar 20 06:54] Estimated time to complete this exponent: 591 days, 0 hours, 57 minutes.
[Work thread Mar 20 06:54] Worker stopped.

Last fiddled with by Mini-Geek on 2010-03-20 at 11:59
Mini-Geek is offline   Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Perpetual benchmark thread... Xyzzy Hardware 813 2020-05-07 17:00
Sieve Benchmark Thread Historian Twin Prime Search 105 2013-02-05 01:35
LLR benchmark thread Oddball Riesel Prime Search 5 2010-08-02 00:11
sr5sieve Benchmark thread axn Sierpinski/Riesel Base 5 25 2010-05-28 23:57
Old Hardware Thread E_tron Hardware 0 2004-06-18 03:32

All times are UTC. The time now is 06:56.

Thu Aug 6 06:56:04 UTC 2020 up 20 days, 2:42, 1 user, load averages: 1.55, 1.68, 1.65

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.