mersenneforum.org  

Go Back   mersenneforum.org > Great Internet Mersenne Prime Search > Software

Reply
 
Thread Tools
Old 2021-10-03, 15:16   #12
ATH
Einyen
 
ATH's Avatar
 
Dec 2003
Denmark

2×3×13×41 Posts
Default

It got stuck running benchmark this morning at 5am. "Pausing worker to run the needed benchmarks". It was doing P+1 on 31M (1600K FMA3) with 1 worker 8 cores. Prime95 30.7b1 on Windows 10.

Now 11 hours later when I checked the computer, Prime95 was still using 1 core for something in Task Manager but never ran any benchmarks and no P+1 since 5am. It could not be shut down, had to kill the process in Task Manager.

The file "results.bench.txt" was not updated, I'll see if it happens again tomorrow.

Could it be because it is an old long "results.bench.txt" file at 383 KB going back to April 2019 ?
ATH is offline   Reply With Quote
Old 2021-10-03, 17:21   #13
Prime95
P90 years forever!
 
Prime95's Avatar
 
Aug 2002
Yeehaw, FL

5×29×53 Posts
Default

Quote:
Originally Posted by ATH View Post
It got stuck running benchmark this morning at 5am.
A line of code mysteriously disappeared. I'll upload fixed executables today.
Prime95 is offline   Reply With Quote
Old 2021-10-03, 18:24   #14
tha
 
tha's Avatar
 
Dec 2002

827 Posts
Default

I have this in my screen output for every result:
Code:
[Work thread Oct 3 14:23] M9141287 stage 2 complete. 9147452 transforms. Total time: 2390.486 sec.
[Work thread Oct 3 14:23] Stage 2 GCD complete. Time: 1.301 sec.
[Work thread Oct 3 14:23] M9141287 completed P-1, B1=2000000, B2=162000000, Wi8: E5571098
[Comm thread Oct 3 14:23] Sending result to server: UID: Tha/Z170-m30.7, M9141287 completed P-1, B1=2000000, B2=162000000, Wi8: E5571098
[Comm thread Oct 3 14:23] 
[Comm thread Oct 3 14:23] URL: http://v5.mersenne.org/v5server/?v=0.95&px=GIMPS&t=ar&g=df88abe73833aa676d31a0bf32b0d492&k=0&m={"status":"NF",+"exponent":9141287,+"worktype":"P-1",+"b1":2000000,+"b2":162000000,+"fft-length":491520,+"security-code":"E5571098",+"program":{"name":"Prime95",+"version":"30.7",+"build":1,+"port":8},+"timestamp":"2021-10-03+12:23:14",+"user":"Tha",+"computer":"Z170-m30.7"}%0A&r=5&d=1&A=1&b=2&n=9141287&c=-1&B1=2000000&B2=162000000&fftlen=491520&ss=59330&sh=AE771A6DD8A50DE4365D285900BB3A12
[Work thread Oct 3 14:23] 
[Work thread Oct 3 14:23] P-1 on M9141317 with B1=2000000, B2=TBD
tha is offline   Reply With Quote
Old 2021-10-03, 18:39   #15
Prime95
P90 years forever!
 
Prime95's Avatar
 
Aug 2002
Yeehaw, FL

5·29·53 Posts
Default

Quote:
Originally Posted by Prime95 View Post
A line of code mysteriously disappeared.
Actually, not a mystery. My text editor begins most commands with ^X (e.g. save file is ^X^S). MS Visual Studio treats ^X as delete the current line. If you then build an executable, Visual Studio saves the file.

I usually catch these fat fingered moments, but this one slipped through undetected. I've taken this moment to change Visual Studio to not map ^X to any commands.
Prime95 is offline   Reply With Quote
Old 2021-10-03, 18:45   #16
Prime95
P90 years forever!
 
Prime95's Avatar
 
Aug 2002
Yeehaw, FL

170058 Posts
Default

Quote:
Originally Posted by tha View Post
I have this in my screen output for every result:

This behavior did not change to my knowledge. Either don't merge the comm and worker window output or go to Test/Primenet/Connection and turn off "Output debug info to prime.log" (a.k.a. Debug=0 in the [PrimeNet] section of prime.txt).
Prime95 is offline   Reply With Quote
Old 2021-10-03, 22:19   #17
Chuck
 
Chuck's Avatar
 
May 2011
Orange Park, FL

2×449 Posts
Default No CERTS

I haven't received any CERTS since updating. I have the box "Get occasional proof certification work" checked. Maybe just a coincidence but I usually get several CERTs a day.
Chuck is offline   Reply With Quote
Old 2021-10-03, 23:50   #18
Prime95
P90 years forever!
 
Prime95's Avatar
 
Aug 2002
Yeehaw, FL

5·29·53 Posts
Default

Build 2 with the benchmark fix now ready.
Prime95 is offline   Reply With Quote
Old 2021-10-04, 15:15   #19
kruoli
 
kruoli's Avatar
 
"Oliver"
Sep 2017
Porta Westfalica, DE

14008 Posts
Default

Quote:
Originally Posted by Prime95 View Post
In preferences, set output iterations low -- like 10000.
Before running the test, I forgot to change that value (it was 250000). I hope that's okay either way?

CPU: AMD 3800X (Zen 2)
1 Worker, 8 Threads
106M exponent, 5760K FFT
Stage 1: 1100-1120 seconds per output
Stage 2: 1965-1985 seconds per output

I probably should mention that I have Brent-Suyama activated in prime.txt (largely because of personal preference) and that I have doubled tests_saved, is it still helpful or should I run one exponent with default settings?

Last fiddled with by kruoli on 2021-10-04 at 15:16 Reason: Grammar.
kruoli is offline   Reply With Quote
Old 2021-10-04, 18:11   #20
Chuck
 
Chuck's Avatar
 
May 2011
Orange Park, FL

38216 Posts
Default

Quote:
Originally Posted by Chuck View Post
I haven't received any CERTS since updating. I have the box "Get occasional proof certification work" checked. Maybe just a coincidence but I usually get several CERTs a day.
After updating to build 2 I am receiving CERTS again.
Chuck is offline   Reply With Quote
Old 2021-10-04, 19:48   #21
Prime95
P90 years forever!
 
Prime95's Avatar
 
Aug 2002
Yeehaw, FL

5·29·53 Posts
Default

Quote:
Originally Posted by kruoli View Post
Before running the test, I forgot to change that value (it was 250000). I hope that's okay either way?

I probably should mention that I have Brent-Suyama activated in prime.txt (largely because of personal preference) and that I have doubled tests_saved, is it still helpful or should I run one exponent with default settings?
That's OK, thanks for the data.

Brent-Suyama is no longer supported. An artifact of the P+1-style stage 2.

Quote:
Originally Posted by Chuck View Post
After updating to build 2 I am receiving CERTS again.
Coincidence.
Prime95 is offline   Reply With Quote
Old 2021-10-04, 21:13   #22
pepi37
 
pepi37's Avatar
 
Dec 2011
After milion nines:)

1,487 Posts
Default

Win 10
I5-9600K stock frequency



With Prime95 30.7 b2 I have this problem
Quote:

[Oct 4 23:00:26] Waiting 15 seconds to stagger worker starts.
[Oct 4 23:00:42] Worker starting
[Oct 4 23:00:42] Setting affinity to run worker on CPU core #5
[Oct 4 23:00:42] Starting Gerbicz error-checking PRP test of 49923*2^1700000+1 using all-complex FMA3 FFT length 144K, Pass1=768, Pass2=192, clm=2
[Oct 4 23:00:44] ERROR: Comparing Gerbicz checksum values failed. Rolling back to iteration 15.
[Oct 4 23:00:44] Continuing from last save file.
[Oct 4 23:00:44] Resuming Gerbicz error-checking PRP test of 49923*2^1700000+1 using all-complex FMA3 FFT length 144K, Pass1=768, Pass2=192, clm=2
[Oct 4 23:00:44] Iteration: 16 / 1700015 [0.00%].
[Oct 4 23:00:44] Hardware errors have occurred during the test!
[Oct 4 23:00:44] 1 Gerbicz/double-check error.
[Oct 4 23:00:44] Confidence in final result is excellent.
[Oct 4 23:00:45] ERROR: Comparing Gerbicz checksum values failed. Rolling back to iteration 15.
[Oct 4 23:00:45] Continuing from last save file.
[Oct 4 23:00:45] Resuming Gerbicz error-checking PRP test of 49923*2^1700000+1 using all-complex FMA3 FFT length 144K, Pass1=768, Pass2=192, clm=2
[Oct 4 23:00:45] Iteration: 16 / 1700015 [0.00%].
[Oct 4 23:00:45] Hardware errors have occurred during the test!
[Oct 4 23:00:45] 2 Gerbicz/double-check errors.
[Oct 4 23:00:45] Confidence in final result is excellent.
On the other side, with Prime95 30.6 build 4 on same configuration


Quote:
[Oct 4 23:03:56] Waiting 15 seconds to stagger worker starts.
[Oct 4 23:04:11] Worker starting
[Oct 4 23:04:11] Setting affinity to run worker on CPU core #5
[Oct 4 23:04:11] Starting Gerbicz error-checking PRP test of 49923*2^1700000+1 using all-complex FMA3 FFT length 144K, Pass1=768, Pass2=192, clm=2
[Oct 4 23:04:12] Gerbicz error check passed at iteration 976.
[Oct 4 23:04:12] Gerbicz error check passed at iteration 2000.
[Oct 4 23:04:13] Gerbicz error check passed at iteration 3089.
[Oct 4 23:04:14] Gerbicz error check passed at iteration 4178.
[Oct 4 23:04:15] Gerbicz error check passed at iteration 5334.
[Oct 4 23:04:15] Gerbicz error check passed at iteration 6559.
pepi37 is offline   Reply With Quote
Reply

Thread Tools


All times are UTC. The time now is 00:49.


Sat Dec 4 00:49:11 UTC 2021 up 133 days, 19:18, 0 users, load averages: 1.06, 1.28, 1.39

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.