20200505, 22:09  #100  
"Ed Hall"
Dec 2009
Adirondack Mtns
3×5×223 Posts 
Quote:


20200506, 02:45  #101  
"Ed Hall"
Dec 2009
Adirondack Mtns
D11_{16} Posts 
Quote:


20200506, 13:55  #102  
Apr 2020
2^{2}·23 Posts 
Quote:
Code:
tasks.I = 15 tasks.qmin = 5000000 # subject to further investigation tasks.lim0 = 90000000 tasks.lim1 = 125000000 tasks.lpb0 = 31 tasks.lpb1 = 31 tasks.sieve.mfb0 = 58 # or 59 tasks.sieve.mfb1 = 90 tasks.sieve.ncurves0 = 20 tasks.sieve.ncurves1 = 13 tasks.sieve.qrange = 10000 

20200506, 14:10  #103 
"Curtis"
Feb 2005
Riverside, CA
1000011010101_{2} Posts 
Yep!
Sorry I didn't get 'round to this last night composing today's calculus exam took more time and energy than I expected. Seems I now procrastinate just as badly as my students! 
20200506, 21:40  #104 
Apr 2020
2^{2}×23 Posts 
Here's some more duplication rate data:
Code:
qmin raw unique 500000 367310494 213177040 3000000 348579594 216387208 5000000 339080413 217856601 7000000 331657087 218727230 10000000 323179335 219755058 13000000 316605494 220579118 17000000 307823056 220314561 20000000 303177219 220593021 It looks as if 15M or 20M would be a good value to start at. 
20200507, 00:19  #105 
"Curtis"
Feb 2005
Riverside, CA
31·139 Posts 
Let's go with 15M; it's possible that other polys will behave differently, and the "best" curve is rather flat from 13M to 20M. Looks like this lowers our rels_wanted by nearly 20%!!
Thanks very much for exploring this parameter! I've explored best startingQ only for C100C120 sized jobs, and best was small indeed (under 100k). I'll try boosting startingQ when I resume C140sized work later this month. 
20200511, 14:07  #106 
Apr 2020
1011100_{2} Posts 
58.3M CPUseconds of sieving gave me this:
Code:
Mon May 11 13:07:16 2020 commencing relation filtering Mon May 11 13:07:16 2020 setting target matrix density to 100.0 Mon May 11 13:07:16 2020 estimated available RAM is 15845.4 MB Mon May 11 13:07:16 2020 commencing duplicate removal, pass 1 ... Mon May 11 13:29:01 2020 found 54632218 hash collisions in 211322739 relations Mon May 11 13:29:23 2020 added 122394 free relations Mon May 11 13:29:23 2020 commencing duplicate removal, pass 2 Mon May 11 13:33:23 2020 found 64594317 duplicates and 146850816 unique relations ... Mon May 11 14:39:15 2020 matrix is 17010145 x 17010371 (6703.3 MB) with weight 1760454238 (103.49/col) Mon May 11 14:39:15 2020 sparse part has weight 1587118135 (93.30/col) Mon May 11 14:39:15 2020 using block size 8192 and superblock size 884736 for processor cache size 9216 kB Mon May 11 14:39:58 2020 commencing Lanczos iteration (6 threads) Mon May 11 14:39:58 2020 memory use: 6443.4 MB Mon May 11 14:40:41 2020 linear algebra at 0.0%, ETA 127h46m Worth trying mfb0 = 59 (this was with 58), or would that be unlikely to make a difference? (Also a c168 Homogeneous Cunningham has popped up  what params would you suggest if I decide to do that next?) 
20200511, 14:32  #107 
"Curtis"
Feb 2005
Riverside, CA
31×139 Posts 
We surely can try mfb0 = 59, but we may as well try that on a 31/32 job that we already expect to be quicker.
Let's start a new thread for 165170 digits. I expect this will be on the cusp where 2LP and 3LP are about the same speed. The short answer (compared to C178 settings): Cut poly select by 75% by halving admax and halving P. Use the 31/31 settings you just tried, but with A=28. Given the lower duplicate rate you saw on A=28, I'd drop Qmin to 10M. You could drop lim's a bit, perhaps 10M each, but it doesn't matter much. You already have strong grasp of how to control rels_wanted, but I expect to need 10% fewer relations for 10 digits smaller. 
20200803, 23:28  #108 
Apr 2020
2^{2}·23 Posts 
I've just sieved two c179s with parameters similar to the consensus from this thread.
The first c179 used parameters Code:
tasks.I = 15 tasks.qmin = 20000000 tasks.lim0 = 95000000 tasks.lim1 = 135000000 tasks.lpb0 = 31 tasks.lpb1 = 32 tasks.sieve.lambda0 = 1.88 tasks.sieve.mfb0 = 58 tasks.sieve.mfb1 = 90 tasks.sieve.ncurves0 = 20 tasks.sieve.ncurves1 = 13 64.9M CPUseconds of sieving for 321M raw relations, 224M unique. TD=110 produced a 14.8M matrix. The second c179 (almost a c180) used the same parameters except with lambda0 removed. Poly score was 1.000e13. 64.4M CPUseconds of sieving for 313M raw relations, 218M unique. TD=110 produced a 15.2M matrix. So the second c179 only sieved about 2% slower despite having an 11% worse poly. Looks like no lambdas might be the way to go here. For the purposes of a hypothetical c180 parameters file, 300M relations would probably be a good target  I sieved a bit more to make the matrices nicer. 
20200804, 00:44  #109 
"Curtis"
Feb 2005
Riverside, CA
31×139 Posts 
That's odd, and means I likely don't understand what lambda does. I thought it was a finer control on mfb, specifically that mfb0 would be lambda0 * lpb0. But 31 * 1.88 is 58.28, meaning mfb0 of 58 is a tighter restriction and that lambda0 isn't doing anything in this list of settings.
If you have another similarsized candidate available, try keeping lambda0 but changing mfb0 to 59 rather than 58. It seems I have some setting too tight, but I'm not clear on which one! 
20200804, 02:19  #110  
Apr 2020
2^{2}·23 Posts 
Quote:
If I'm understanding the documentation correctly, lambda applies to the *approximation* of the size of the cofactor, based on the estimates of the logs of the norm and the prime factors found in sieving. The cofactor isn't actually calculated unless its approximated log (base 2) is smaller than lambda*lpb; if the cofactor then turns out to be larger than 2^mfb it's thrown out. The parameter documentation tells us that: Code:
# In case lambda0 or lambda1 are not given (or have value 0), # a default value is computed from mfb0 or mfb1. Since the sieving # parameters are optimized without lambda0/lambda1, it is better to # leave them unspecified. Having lambda*lpb < mfb, as was the case for some of the jobs in this thread and for your parameter files for small numbers, means that we throw out potential relations below our mfb bound. On the other hand, we don't waste much time calculating cofactors that end up being bigger than 2^mfb. It ends up looking like a job with a slightly smaller mfb except with a few relations that break that bound. I trust that this actually did turn out to be the optimal approach for small numbers, but it seems this might not be the case anymore at ~c180. Perhaps the proportion of CPUtime spent *calculating* the cofactors becomes smaller as N gets bigger, so the wasted time spent calculating cofactors larger than 2^mfb becomes less of an issue? Would be helpful if someone with a better understanding of NFS could weigh in here. In summary, I don't think lambda should be thought of as fine tuning of mfb; it's more like a quirk that's necessary because of the way the process of sieving works. I have a c180 (1186...) in polynomial selection. I'll try mfb=59; tweaking the default lambdas can wait. Last fiddled with by charybdis on 20200804 at 02:20 

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Integers congruent to last two decimal digits mod 23  enzocreti  enzocreti  1  20200303 18:38 
Twin Primes with 128 Decimal Digits  tuckerkao  Miscellaneous Math  2  20200216 06:23 
Playing with decimal representation  Nick  Puzzles  9  20130213 17:17 
Decimal Value of Mersenne Prime  vsuite  GPU Computing  11  20110202 04:47 
Decimal Places  Corbyguy  Software  3  20080609 18:09 