Assignment died of dysentery

kladner · 2011-12-18, 03:37

This is from P95-64 results.txt:

[Sat Nov 26 06:07:43 2011]
UID: kladner/pod64, M52309151 completed P-1, B1=505000, B2=10100000, We4: 49F936EF

and from current "Assignments for ktony" on GPU272- (see attached capture.)

If this was on mfaktc, I would suspect that I just screwed up reporting my work, but I've had a few like this on P95: Still listed on GPU272, but marked as "done" in results.txt.

chalsall · 2011-12-18, 03:46

Quote:

Originally Posted by kladner

If this was on mfaktc, I would suspect that I just screwed up reporting my work, but I've had a few like this on P95: Still listed on GPU272, but marked as "done" in results.txt.

GPU272 can only go by what PrimeNet reports: Exponent Status for 52309151.

kladner · 2011-12-18, 04:17

Quote:

Originally Posted by chalsall

GPU272 can only go by what PrimeNet reports: Exponent Status for 52309151.

Can't argue with that, and I should have checked there. But I'm just puzzled that I have a completion listed. Currently, I don't let P95 communicate with PrimeNet automatically, but I do tell it to try at least once a day.

[pause]

Well Duh. I just pasted in the lines from results.txt on the manual results page, and got this:

P-1 lines found: 1 Processing result: M52309151 completed P-1, B1=505000, B2=10100000, We4: 49F936EF CPU credit is 3.1585 GHz-days.

At least it has been reported. I'm not sure how it didn't get reported.

EDIT: I guess I should troll through the files and make sure there aren't any other orphans I've let be neglected.

petrw1 · 2011-12-21, 15:41

I forgot to set my MaxExponents on one CPU and lost a few assignments.
I still have them on GPU-72 but when I check Prime95 someone else has them.

I assume I can simply unreserve them in GPU-72??? ... I don't want to risk doing something that will have them dropped for whoever has them now.

chalsall · 2011-12-21, 16:09

Quote:

Originally Posted by petrw1

I forgot to set my MaxExponents on one CPU and lost a few assignments.

Even after two warnings on the assignment pages? In red???

Quote:

Originally Posted by petrw1

I still have them on GPU-72 but when I check Prime95 someone else has them. I assume I can simply unreserve them in GPU-72??? ... I don't want to risk doing something that will have them dropped for whoever has them now.

Please DON'T unreserve them at the moment, and PM me the exponents in question (I can determine this myself, but I'd like your understanding as well).

I want to automate the handling of this somewhat unusual situation as it is likely to increase in frequency as more and more people start doing more DC and LL work assigned by the system.

petrw1 · 2011-12-21, 16:37

Quote:

Originally Posted by chalsall

Even after two warnings on the assignment pages? In red???

.

In my (feeble) defense, the CPU in question belongs to my son who does not live with me.

Quote:

Please DON'T unreserve them at the moment, and PM me the exponents in question (I can determine this myself, but I'd like your understanding as well).

I want to automate the handling of this somewhat unusual situation as it is likely to increase in frequency as more and more people start doing more DC and LL work assigned by the system.

The default is 15. He had 11 or 12 P-1s (per core) left when I sent him 5 DCs (per core). Most people probably won't grab a lot of DC/LL at one time, especially since you limit it to 5 at a time.

kladner · 2011-12-26, 18:33

I am scanning my assignments on GPU to 72, and have run into at least one which is still assigned, but shows completion on PrimeNet.

53093321
http://www.mersenne.org/report_expon...&B1=Get+status

EDIT: M53093423 is assigned, but shows completion in my uploaded results file.

Code:

no factor for M53093423 from 2^70 to 2^71 [mfaktc 0.17-Win barrett79_mul32]
no factor for M53093423 from 2^71 to 2^72 [mfaktc 0.17-Win barrett79_mul32]

I submitted this exponent again, but the server says "Error 40, not needed"

The status page only shows work to 2^69.
http://www.mersenne.org/report_expon...&B1=Get+status

Is there something I am missing here? Should I unreserve the assignment?

chalsall · 2011-12-26, 19:48

Quote:

Originally Posted by kladner

I am scanning my assignments on GPU to 72, and have run into at least one which is still assigned, but shows completion on PrimeNet.

<snip>

Is there something I am missing here?

With regards to 53093321, you have only taken it to 71, but you "pledged" to take it to 72. So the G72 system thinks you're still working on it.

With regards to 53093423, even though you might have completed it on your system(s), you appear to have not submitted the results to PrimeNet.

Quote:

Originally Posted by kladner

Should I unreserve the assignment?

No.

Please complete and submit the work results to PrimeNet.

Dubslow · 2011-12-26, 20:14

Quote:

Originally Posted by kladner

EDIT: M53093423 is assigned, but shows completion in my uploaded results file.

Code:

no factor for M53093423 from 2^70 to 2^71 [mfaktc 0.17-Win barrett79_mul32]
no factor for M53093423 from 2^71 to 2^72 [mfaktc 0.17-Win barrett79_mul32]

I submitted this exponent again, but the server says "Error 40, not needed"

The status page only shows work to 2^69.
http://www.mersenne.org/report_expon...&B1=Get+status

Is there something I am missing here? Should I unreserve the assignment?

My emphasis. Also chalsall with regards to my lost AID I've PM'd you the exponent.

chalsall · 2011-12-26, 20:41

Quote:

Originally Posted by chalsall

With regards to 53093423, even though you might have completed it on your system(s), you appear to have not submitted the results to PrimeNet

Whoops. Sorry. Didn't read / drill-down carefully enough.

The problem with 53093423 is you "pledged" to take it from 69 to 72 (assigned 2011-12-14 15:18:36), but the results you tried to submit was only for 70 to 71 and 71 to 72. As in, you didn't submit the results for 69 to 70 first.

PrimeNet won't accept results for higher bit levels until the lower bit levels have been given.

kladner · 2011-12-26, 21:09

Quote:

Originally Posted by chalsall

Whoops. Sorry. Didn't read / drill-down carefully enough.

The problem with 53093423 is you "pledged" to take it from 69 to 72 (assigned 2011-12-14 15:18:36), but the results you tried to submit was only for 70 to 71 and 71 to 72. As in, you didn't submit the results for 69 to 70 first.

PrimeNet won't accept results for higher bit levels until the lower bit levels have been given.

Ah! Thanks for straightening me out. I tried to figure it out, but I didn't look closely enough.

EDIT: Clearly I had a misstep in my submission procedure back then, and missed a block or more of results. Time for more study and comparison of assignments, completions, and reported status.

2011-12-18, 03:37	#1
kladner "Kieren" Jul 2011 In My Own Galaxy! 23654₈ Posts	Assignment died of dysentery This is from P95-64 results.txt: [Sat Nov 26 06:07:43 2011] UID: kladner/pod64, M52309151 completed P-1, B1=505000, B2=10100000, We4: 49F936EF and from current "Assignments for ktony" on GPU272- (see attached capture.) If this was on mfaktc, I would suspect that I just screwed up reporting my work, but I've had a few like this on P95: Still listed on GPU272, but marked as "done" in results.txt. Attached Thumbnails Last fiddled with by kladner on 2011-12-18 at 03:42 Reason: added word "current"

2011-12-21, 15:41	#4
petrw1 1976 Toyota Corona years forever! "Wayne" Nov 2006 Saskatchewan, Canada 1000111001011₂ Posts	Lost a few assignments... I forgot to set my MaxExponents on one CPU and lost a few assignments. I still have them on GPU-72 but when I check Prime95 someone else has them. I assume I can simply unreserve them in GPU-72??? ... I don't want to risk doing something that will have them dropped for whoever has them now.

2011-12-26, 18:33	#7
kladner "Kieren" Jul 2011 In My Own Galaxy! 2²·2,539 Posts	I am scanning my assignments on GPU to 72, and have run into at least one which is still assigned, but shows completion on PrimeNet. 53093321 http://www.mersenne.org/report_expon...&B1=Get+status EDIT: M53093423 is assigned, but shows completion in my uploaded results file. Code: no factor for M53093423 from 2^70 to 2^71 [mfaktc 0.17-Win barrett79_mul32] no factor for M53093423 from 2^71 to 2^72 [mfaktc 0.17-Win barrett79_mul32] I submitted this exponent again, but the server says "Error 40, not needed" The status page only shows work to 2^69. http://www.mersenne.org/report_expon...&B1=Get+status Is there something I am missing here? Should I unreserve the assignment? Last fiddled with by kladner on 2011-12-26 at 18:42

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
disk died, prime work lost forever? where to put prime? on SSD or HDD?	emily	PrimeNet	3	2013-03-01 05:49
new assignment	esakertt	PrimeNet	6	2012-11-09 19:51
Want New Assignment	Unregistered	Information & Answers	1	2012-03-28 00:02
Old Assignment	Primeinator	PrimeNet	4	2009-06-04 22:35
How would you know if I died ?	rogue	Soap Box	9	2005-11-08 19:50