Prime95 version 29.4 - Page 13

GP2 · 2017-12-05, 00:44

Quote:

Originally Posted by R. Gerbicz

On each exponent there are problems

Hmm, yes, I see the previous PRP tests on 2017-10-18 had bad (duplicated) factors. And that seems to be preventing a new test from being run with the correct factors.

Quote:

but here q^2 doesn't divide

And our hopes of a new Wieferich prime are dashed. 😭

Prime95 · 2017-12-05, 01:04

Two problems on M2207441.
1) Somehow the factor got added to the database .003 seconds apart.
2) Somehow a PRP test was run with the doubled factor without triggering the "xxx does not divide Myyy" error.
Database fixed manually.

ATH · 2017-12-05, 01:26

Quote:

Originally Posted by Prime95

Two problems on M2207441.
1) Somehow the factor got added to the database .003 seconds apart.
2) Somehow a PRP test was run with the doubled factor without triggering the "xxx does not divide Myyy" error.
Database fixed manually.

Does the database test divisibility of each factor into M2207441 individually or divisibility into M2207441/alreadytestedfactors. In the former case the double factor would be permitted.

https://mersenne.org/M2233019 also have a double factor in a previous PRP test.

storm5510 · 2017-12-05, 01:47

I have experienced forced restarts while running ECM's on 29.4. I tried 29.3. Same thing. I tried a lot of different things, like resetting my BIOS to its default values. Nothing helped. So, last night, I deleted prime.txt and local.txt. I let 29.4 recreate them. The system ran overnight without incident.

It is true that I added a few things i saw in undoc.txt. The only thing major I added was an Affinity setting to pick specific CPU threads in local.txt. It was as below:

Code:

[Worker #1]
Affinity=1,{3,5,7}

I had kept the two configuration files for a long time and simply replaced the program file(s) as they came along. There must have been some kind of hold-over from a version previous to 29.1. As to exactly what that was, I have no idea. I am not sure this was even the cause. So, I will leave the two files as is and see what happens.

GP2 · 2017-12-05, 02:17

Quote:

Originally Posted by Prime95

Database fixed manually.

There may still be a problem with M2207441 because the newly submitted result by ATH with the correct set of factors shows up as Verified (Factored) rather than Unverified.

I will run the exponent and see what happens.

HLB · 2017-12-07, 18:57

I would like to know why in v27.9 build 1 AVX recommended by Gigabyte with 5GHZ in the 7700k with 1.38v 2 hours of test and v29.4 build 5 FMA3 does not go through 5 minutes? Bug?

ixfd64 · 2017-12-07, 19:35

I just installed 29.4 on my MacBook Pro and got an error saying that Prime95 could not be opened because of a problem. Here is the error report:

Code:

Process:               Prime95 [1056]
Path:                  /private/var/folders/*/Prime95.app/Contents/MacOS/Prime95
Identifier:            org.mersenne.Prime95
Version:               28.8 (1.0)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Prime95 [1056]
User ID:               1455265355

Date/Time:             2017-12-07 11:34:08.884 -0800
OS Version:            Mac OS X 10.12.6 (16G1114)
Report Version:        12
Anonymous UUID:        F12EAC70-6EC2-D3A6-6EF5-BA05C2B556D5


Time Awake Since Boot: 3700 seconds

System Integrity Protection: enabled

Notes:                 Translocated Process

Crashed Thread:        0

Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    DYLD, [0x1] Library missing

Application Specific Information:
dyld: launch, loading dependent libraries

Dyld Error Message:
  Library not loaded: /usr/local/lib/libgmp.10.dylib
  Referenced from: /private/var/folders/*/Prime95.app/Contents/MacOS/Prime95
  Reason: image not found

Binary Images:
       0x100000000 -        0x101466fff +org.mersenne.Prime95 (28.8 - 1.0) <F2132812-7C26-3140-9923-32E16D9E6BDB> /var/folders/*/Prime95.app/Contents/MacOS/Prime95
       0x10afec000 -        0x10b029dc7  dyld (433.5) <322C06B7-8878-311D-888C-C8FD2CA96FF3> /usr/lib/dyld
    0x7fffe1e81000 -     0x7fffe1ed7ff7  libc++.1.dylib (307.5) <0B43BB5D-E6EB-3464-8DE9-B41AC8ED9D1C> /usr/lib/libc++.1.dylib
    0x7fffe22bc000 -     0x7fffe230efff  libcurl.4.dylib (95.70.4) <D81AEB1D-8501-3EEC-9651-D6D476C2A387> /usr/lib/libcurl.4.dylib

Model: MacBookPro13,3, BootROM MBP133.0233.B00, 4 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 2.38f7
Graphics: Intel HD Graphics 530, Intel HD Graphics 530, Built-In
Graphics: Radeon Pro 455, AMD Radeon Pro 455, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, LPDDR3, 2133 MHz, 0x802C, 0x4D5435324C31473332443450472D30393320
Memory Module: BANK 1/DIMM0, 8 GB, LPDDR3, 2133 MHz, 0x802C, 0x4D5435324C31473332443450472D30393320
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x15A), Broadcom BCM43xx 1.0 (7.21.171.133.1a2)
Bluetooth: Version 5.0.5f1, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
USB Device: USB 3.0 Bus
USB Device: iBridge
USB Device: USB-C Multiport Adapter
USB Device: USB 2.0 Hub
USB Device: USB Receiver
USB Device: USB-C Multiport Adapter
USB Device: AX88179
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Prime95 · 2017-12-07, 20:46

Move the included libgmp.10.dylib to /usr/local/lib/libgmp.10.dylib

I'm working on a better solution.

VBCurtis · 2017-12-07, 21:23

Quote:

Originally Posted by HLB

I would like to know why in v27.9 build 1 AVX recommended by Gigabyte with 5GHZ in the 7700k with 1.38v 2 hours of test and v29.4 build 5 FMA3 does not go through 5 minutes? Bug?

If by "bug" you mean "evidence my overclock is not fully stable", then yes. Turn speed down, find software runs fine, conclude it's not the software at fault.

ixfd64 · 2017-12-07, 21:31

Quote:

Originally Posted by Prime95

Move the included libgmp.10.dylib to /usr/local/lib/libgmp.10.dylib

I'm working on a better solution.

That works like a charm. Thanks!

HLB · 2017-12-07, 21:50

Quote:

Originally Posted by VBCurtis

If by "bug" you mean "evidence my overclock is not fully stable", then yes. Turn speed down, find software runs fine, conclude it's not the software at fault.

The only way I found stability was by using avx offset -2, some manufacturers do not recommend testing with the prime FMA3 just the old 27.9 with AVX.

2017-12-05, 01:47	#136
storm5510 Random Account Aug 2009 77F₁₆ Posts	I have experienced forced restarts while running ECM's on 29.4. I tried 29.3. Same thing. I tried a lot of different things, like resetting my BIOS to its default values. Nothing helped. So, last night, I deleted prime.txt and local.txt. I let 29.4 recreate them. The system ran overnight without incident. It is true that I added a few things i saw in undoc.txt. The only thing major I added was an Affinity setting to pick specific CPU threads in local.txt. It was as below: Code: [Worker #1] Affinity=1,{3,5,7} I had kept the two configuration files for a long time and simply replaced the program file(s) as they came along. There must have been some kind of hold-over from a version previous to 29.1. As to exactly what that was, I have no idea. I am not sure this was even the cause. So, I will leave the two files as is and see what happens.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Prime95 version 27.3	Prime95	Software	148	2012-03-18 19:24
Prime95 version 26.3	Prime95	Software	76	2010-12-11 00:11
Prime95 version 25.5	Prime95	PrimeNet	369	2008-02-26 05:21
Prime95 version 25.4	Prime95	PrimeNet	143	2007-09-24 21:01
When the next prime95 version ?	pacionet	Software	74	2006-12-07 20:30

2017-12-05, 01:04	#134
Prime95 P90 years forever! Aug 2002 Yeehaw, FL 16364₈ Posts	Two problems on M2207441. 1) Somehow the factor got added to the database .003 seconds apart. 2) Somehow a PRP test was run with the doubled factor without triggering the "xxx does not divide Myyy" error. Database fixed manually.

2017-12-07, 18:57	#138
HLB Dec 2017 2² Posts	I would like to know why in v27.9 build 1 AVX recommended by Gigabyte with 5GHZ in the 7700k with 1.38v 2 hours of test and v29.4 build 5 FMA3 does not go through 5 minutes? Bug?

2017-12-07, 20:46	#140
Prime95 P90 years forever! Aug 2002 Yeehaw, FL 2²×17×109 Posts	Move the included libgmp.10.dylib to /usr/local/lib/libgmp.10.dylib I'm working on a better solution.