LMH status

[chalsall]

Originally Posted by petrw1

Just a suggestion but while you are doing this; if you set your factoring limits to go to 63 bits immediately (i.e. FACTOR=900000001,59,63) you will significantly reduce server traffic when reporting results. Only one result would be sent per assignment and even a slow PIV would complete it in minutes.

Yeah, I know. But Scott and I have worked out a technique which seems to work well to reduce my impact.

My submission script "bursts" for a few seconds every minute (except between 0:00 and 0:10 after the hour), submitting results as quickly as it can. Then it stops, letting others submit. If it notices a less than nominal number of submissions, it stops submitting for fifteen minutes.

[petrw1]

Originally Posted by chalsall

+------------+------------+-------------+---------+
| RangeStart | RangeDepth | FactorDepth | FDCount |
+------------+------------+-------------+---------+
|          0 |  100000000 |          59 |       7 | 
|  600000000 |  100000000 |          59 | 1227914 | 
|  700000000 |  100000000 |          59 |  392112 | 
|  900000000 |  100000000 |          59 |  104330 | 
+------------+------------+-------------+---------+

I'm thinking we may be under 1 Million now???
Do you have the official numbers?

[ckdo]

Originally Posted by petrw1

I'm thinking we may be under 1 Million now???
Do you have the official numbers?

Way.

640,096,343-699,999,889: 611,580 @ 59 bits 
710,254,313-726,547,201: 335,287 @ 59 bits
799,564,219-799,998,977:   2,788 @ 59 bits
989,027,981-989,999,819:  24,349 @ 59 bits
                        -------------------
                         974,004 @ 59 bits

Plus 185 @ 58/59 bits below 20,000... any takers?

[petrw1]

Originally Posted by ckdo

Plus 185 @ 58/59 bits below 20,000... any takers?

I tried to take one of these to 60 bits ...but Prime95 called it an invalid assignment and suggested I do ECM instead.

[petrw1]

All exponents factored or assigned (90,000) to 59 bits.

60 bits exist only in the 590M range (currently being assigned). Less than a quarter million left.

61 bits comprise of most of the 2xxM range; about half of the 4xxM range; and a smattering in the 5-7xxM ranges. About 2.5 Million left.

Even 62 bits have not much more than 3M left.

And at the rate they are dropping ...

[petrw1]

... and once all the lower bit levels are done the hourly "Last 1000 Recent Results" report should have more than 5 minutes of results in it.

[chalsall]

For anyone interested, the following is a relatively recent (within 24 hours) state of the factoring depths.

I have added this report to the GIMPS Visualization Tool, including drill-down views.

+-----------+-------+--------+---------+---------+---------+---------+---------+--------+--------+--------+--------+-------+------+------+
| Range     | <60   | F60    | F61     | F62     | F63     | F64     | F65     | F66    | F67    | F68    | F69    | F70   | F71  | >71  |
+-----------+-------+--------+---------+---------+---------+---------+---------+--------+--------+--------+--------+-------+------+------+
|         0 |   178 |  29984 |   80189 |    3231 |   81473 |  835339 |  119878 | 134029 | 247971 | 451744 | 252065 | 20574 | 4103 |   77 | 
| 100000000 |     0 |      0 |       0 |       0 | 2221623 |  173196 |     509 |    270 |      6 |      3 |      0 |     6 |   68 |   96 | 
| 200000000 |     0 |      0 | 1653006 |  704514 |   60219 |   42681 |     143 |     14 |     55 |      2 |      2 |   221 |    0 |  143 | 
| 300000000 |     0 |      0 |       0 |       0 |       0 | 2291295 |   37032 |  17046 |   5420 |   1300 |   1272 |  1085 |  142 |  811 | 
| 400000000 |     0 |      0 |  967143 |  140968 |    9476 |   25565 | 1243234 |    295 |      5 |      0 |     11 |    15 |    0 |  131 | 
| 500000000 |     0 | 240286 |  242485 |  685999 |  404285 |  239732 |  587525 |      3 |      0 |     12 |      0 |     0 |    0 |  154 | 
| 600000000 | 40317 |  10162 |  191872 |  883585 |   96573 |   43548 | 1110912 |   1481 |    108 |     62 |     65 |    23 |   23 |  131 | 
| 700000000 | 50821 |      0 |  209355 |       0 | 2106272 |   22948 |   10041 |     30 |      1 |      0 |      0 |    21 |    1 |  136 | 
| 800000000 |     0 |      0 |       0 | 2212402 |  170785 |   40242 |     184 |     74 |      7 |      8 |      4 |     1 |   52 |   96 | 
| 900000000 |     0 |      0 |       0 |       0 | 2263609 |  115716 |    4913 |   3048 |    165 |    761 |    671 |   423 |  194 |  110 | 
+-----------+-------+--------+---------+---------+---------+---------+---------+--------+--------+--------+--------+-------+------+------+

[petrw1]

Originally Posted by chalsall

For anyone interested, the following is a relatively recent (within 24 hours) state of the factoring depths.

I have added this report to the GIMPS Visualization Tool, including drill-down views.

Cool...

[ckdo]

Originally Posted by chalsall

I have added this report to the GIMPS Visualization Tool, including drill-down views.

Thanks a bunch. I wouldn't mind a "total" column, though...

[petrw1]

Originally Posted by ckdo

Thanks a bunch. I wouldn't mind a "total" column, though...

I second that motion....and maybe a some kind of a total on the bar graph too...or a number pop-up when the mouse is hovered over a column....

And an effective date/time of the data.

Are we demanding enough yet?

[chalsall]

Originally Posted by ckdo

Thanks a bunch. I wouldn't mind a "total" column, though...

How about both a total column and row?

Implemented and live.