20120714, 02:13  #1 
May 2003
3·97 Posts 
Strange YAFU behaviour
I was just running yafu 1.32 and put in the following command line while in yafu:
factor((261673^191)/(2616731)) What I was hoping for was that it would go through various types of factoring  trial factoring, rho, p1, p+1, ecm, then siqs. What happened? It went straight to siqs and did no other factoring that I could see. Also, I have yet to find any evidence of an output file. Can anyone help me figure out what happened? Thanks Thom 
20120714, 02:21  #2 
Basketry That Evening!
"Bunslow the Bold"
Jun 2011
40<A<43 89<O<88
3·29·83 Posts 
No joy.
Code:
bill@Gravemind:~/yafu∰∂ ./yafu "factor((261673^191)/(2616731))" 07/13/12 21:15:01 v1.32 @ Gravemind, System/Build Info: Using GMPECM 6.3, Powered by GMP 5.0.1 detected Intel(R) Core(TM) i72600K CPU @ 3.40GHz detected L1 = 32768 bytes, L2 = 8388608 bytes, CL = 64 bytes measured cpu frequency ~= 3678.756510 using 20 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> fac: factoring 33087358909991677955631647785105282516865431197533714982880853005580653265295676938249187371037963 fac: using pretesting plan: normal fac: using tune info for qs/gnfs crossover div: primes less than 10000 div: found prime factor = 6803 fmt: 1000000 iterations rho: x^2 + 3, starting 1000 iterations on C94 rho: x^2 + 2, starting 1000 iterations on C94 rho: x^2 + 1, starting 1000 iterations on C94 pm1: starting B1 = 150K, B2 = gmpecm default on C94 fac: setting target pretesting digits to 28.92 fac: sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t28.92 ecm: 30/30 curves on C94 input, at B1 = 2K, B2 = gmpecm default fac: setting target pretesting digits to 28.92 fac: t15: 1.00 fac: t20: 0.04 fac: sum of completed work is t15.18 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t28.92 ecm: 74/74 curves on C94 input, at B1 = 11K, B2 = gmpecm default fac: setting target pretesting digits to 28.92 fac: t15: 7.17 fac: t20: 1.04 fac: t25: 0.05 fac: sum of completed work is t20.24 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 214 more curves at B1=50000 needed to get to t28.92 ecm: 214/214 curves on C94 input, at B1 = 50K, B2 = gmpecm default ETA: 0 secc pm1: starting B1 = 3750K, B2 = gmpecm default on C94 fac: setting target pretesting digits to 28.92 fac: t15: 37.74 fac: t20: 11.23 fac: t25: 1.05 fac: t30: 0.07 fac: sum of completed work is t25.33 fac: work done at B1=250000: 0 curves, max work = 430 curves fac: 309 more curves at B1=250000 needed to get to t28.92 ecm: 309/309 curves on C94 input, at B1 = 250K, B2 = gmpecm default ETA: 1 seccc fac: setting target pretesting digits to 28.92 fac: t15: 99.54 fac: t20: 49.85 fac: t25: 7.23 fac: t30: 0.79 fac: t35: 0.07 fac: sum of completed work is t28.93 starting SIQS on c94: 4863642350432408930711693044995631709079146141045673229881060268349353706496498153498337111721 ==== sieve params ==== n = 95 digits, 316 bits factor base: 88816 primes (max prime = 2410783) single large prime cutoff: 313401790 (130 * pmax) double large prime range from 43 to 51 bits double large prime cutoff: 1963281845692011 allocating 9 large prime slices of factor base buckets hold 2048 elements using 32k sieve core sieve interval: 18 blocks of size 32768 polynomial A has ~ 12 factors using multiplier of 17 using SPV correction of 20 bits, starting at offset 31 using SSE2 for x128 sieve scanning using SSE2 for resieving 1316 bit primes using SSE2 for 8x trial divison to 13 bits using SSE2 for poly updating up to 15 bits trial factoring cutoff at 100 bits ==== sieving in progress (1 thread): 88880 relations needed ==== ==== Press ctrlc to abort and save state ==== 41 rels found: 41 full + 0 from 2418 partial, (252.74 rels/sec)^C Aborting... sieve time = 0.0000, relation time = 0.0000, poly_time = 0.0000 trial division touched 244976 sieve locations out of 4827119616 ***factors found*** P4 = 6803 ***cofactor*** C94 = 4863642350432408930711693044995631709079146141045673229881060268349353706496498153498337111721 
20120714, 02:34  #3 
May 2003
3×97 Posts 
Thanks. My nonverbose output agreed with that, at least where the lines were given.

20120714, 02:53  #4 
Basketry That Evening!
"Bunslow the Bold"
Jun 2011
40<A<43 89<O<88
16065_{8} Posts 

20120714, 02:54  #5 
May 2003
3×97 Posts 
BTW, where is the output file?

20120714, 03:48  #6 
Basketry That Evening!
"Bunslow the Bold"
Jun 2011
40<A<43 89<O<88
16065_{8} Posts 
factor.log.
Code:
07/13/12 21:15:01 v1.32 @ Gravemind, 07/13/12 21:15:01 v1.32 @ Gravemind, **************************** 07/13/12 21:15:01 v1.32 @ Gravemind, Starting factorization of 33087358909991677955631647785105282516865431197533714982880853005580653265295676938249187371037963 07/13/12 21:15:01 v1.32 @ Gravemind, using pretesting plan: normal 07/13/12 21:15:01 v1.32 @ Gravemind, using tune info for qs/gnfs crossover 07/13/12 21:15:01 v1.32 @ Gravemind, **************************** 07/13/12 21:15:01 v1.32 @ Gravemind, rho: x^2 + 3, starting 1000 iterations on C94 07/13/12 21:15:01 v1.32 @ Gravemind, rho: x^2 + 2, starting 1000 iterations on C94 07/13/12 21:15:01 v1.32 @ Gravemind, rho: x^2 + 1, starting 1000 iterations on C94 07/13/12 21:15:01 v1.32 @ Gravemind, pm1: starting B1 = 150K, B2 = gmpecm default on C94 07/13/12 21:15:01 v1.32 @ Gravemind, current ECM pretesting depth: 0.00 07/13/12 21:15:01 v1.32 @ Gravemind, scheduled 30 curves at B1=2000 toward target pretesting depth of 28.92 07/13/12 21:15:02 v1.32 @ Gravemind, Finished 30 curves using Lenstra ECM method on C94 input, B1 = 2K, B2 = gmpecm default 07/13/12 21:15:02 v1.32 @ Gravemind, current ECM pretesting depth: 15.18 07/13/12 21:15:02 v1.32 @ Gravemind, scheduled 74 curves at B1=11000 toward target pretesting depth of 28.92 07/13/12 21:15:05 v1.32 @ Gravemind, Finished 74 curves using Lenstra ECM method on C94 input, B1 = 11K, B2 = gmpecm default 07/13/12 21:15:05 v1.32 @ Gravemind, current ECM pretesting depth: 20.24 07/13/12 21:15:05 v1.32 @ Gravemind, scheduled 214 curves at B1=50000 toward target pretesting depth of 28.92 07/13/12 21:15:46 v1.32 @ Gravemind, Finished 214 curves using Lenstra ECM method on C94 input, B1 = 50K, B2 = gmpecm default 07/13/12 21:15:46 v1.32 @ Gravemind, pm1: starting B1 = 3750K, B2 = gmpecm default on C94 07/13/12 21:15:48 v1.32 @ Gravemind, current ECM pretesting depth: 25.33 07/13/12 21:15:48 v1.32 @ Gravemind, scheduled 309 curves at B1=250000 toward target pretesting depth of 28.92 07/13/12 21:19:50 v1.32 @ Gravemind, Finished 309 curves using Lenstra ECM method on C94 input, B1 = 250K, B2 = gmpecm default 07/13/12 21:19:50 v1.32 @ Gravemind, final ECM pretested depth: 28.93 07/13/12 21:19:50 v1.32 @ Gravemind, scheduler: switching to sieve method 07/13/12 21:19:50 v1.32 @ Gravemind, starting SIQS on c94: 4863642350432408930711693044995631709079146141045673229881060268349353706496498153498337111721 07/13/12 21:19:50 v1.32 @ Gravemind, random seeds: 173847163, 1987770324 07/13/12 21:19:50 v1.32 @ Gravemind, ==== sieve params ==== 07/13/12 21:19:50 v1.32 @ Gravemind, n = 95 digits, 316 bits 07/13/12 21:19:50 v1.32 @ Gravemind, factor base: 88816 primes (max prime = 2410783) 07/13/12 21:19:50 v1.32 @ Gravemind, single large prime cutoff: 313401790 (130 * pmax) 07/13/12 21:19:50 v1.32 @ Gravemind, double large prime range from 43 to 51 bits 07/13/12 21:19:50 v1.32 @ Gravemind, double large prime cutoff: 1963281845692011 07/13/12 21:19:50 v1.32 @ Gravemind, allocating 9 large prime slices of factor base 07/13/12 21:19:50 v1.32 @ Gravemind, buckets hold 2048 elements 07/13/12 21:19:50 v1.32 @ Gravemind, using 32k sieve core 07/13/12 21:19:50 v1.32 @ Gravemind, sieve interval: 18 blocks of size 32768 07/13/12 21:19:50 v1.32 @ Gravemind, polynomial A has ~ 12 factors 07/13/12 21:19:50 v1.32 @ Gravemind, using multiplier of 17 07/13/12 21:19:50 v1.32 @ Gravemind, using SPV correction of 20 bits, starting at offset 31 07/13/12 21:19:50 v1.32 @ Gravemind, using SSE2 for trial division and x128 sieve scanning 07/13/12 21:19:50 v1.32 @ Gravemind, using SSE2 for resieving 1316 bit primes 07/13/12 21:19:50 v1.32 @ Gravemind, trial factoring cutoff at 100 bits 07/13/12 21:19:50 v1.32 @ Gravemind, ==== sieving started (1 thread) ==== Last fiddled with by Dubslow on 20120714 at 03:48 
20120714, 03:54  #7 
"Ben"
Feb 2007
111000000010_{2} Posts 
How are you running it? Unfortunately, managing where files go is something I still need to work on more. If you are running from the command line, and calling yafu from a different directory than where the executable sits, then some files will be next to the executable and others will be where you started it from. If you are running it some other way (double clicking on it, for example), then I think everything should be next to the executable.

20120714, 04:24  #8 
May 2003
123_{16} Posts 
Thanks for your help. I found a workaround for the lack of an output file. The second factorization is much more verbose.

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Running YAFU via Aliqueit doesn't find yafu.ini  EdH  YAFU  8  20180314 17:22 
Strange behaviour  ET_  Cloud Computing  15  20170730 11:00 
Inefficient behaviour in yafu when doing large NFS with lots of threads  2147483647  YAFU  3  20161225 21:44 
Strange behaviour of Prime95  LingUaan  Software  13  20151015 16:15 
strange LLR behaviour  Cruelty  Software  5  20080612 21:23 