20200324, 16:05  #67 
"Ben"
Feb 2007
3·1,163 Posts 
Oh, sorry. Didn't refresh the page before responding. I will take a look.

20200324, 19:09  #68 
"Ed Hall"
Dec 2009
Adirondack Mtns
53·71 Posts 
This is repeatable:
If I uninstall GMP 6.1.2 and install 6.2.0, YAFU fails: Code:
$ ./yafu v v 03/24/20 14:48:31 v1.34.5 @ math20, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.2.0 detected Intel(R) Core(TM) i54570S CPU @ 2.90GHz detected L1 = 32768 bytes, L2 = 6291456 bytes, CL = 64 bytes measured cpu frequency ~= 2893.258220 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits div: primes less than 10000 rho: x^2 + 3, starting 1000 iterations on C80 rho: x^2 + 2, starting 1000 iterations on C80 rho: x^2 + 1, starting 1000 iterations on C80 pm1: starting B1 = 150K, B2 = gmpecm default on C80 fac: setting target pretesting digits to 24.62 fac: estimated sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t24.62 ecm: 32/32 curves on C80, B1=2K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 1.07 fac: t20: 0.04 fac: estimated sum of completed work is t15.19 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t24.62 ecm: 76/76 curves on C80, B1=11K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 7.40 fac: t20: 1.06 fac: t25: 0.05 fac: estimated sum of completed work is t20.25 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 187 more curves at B1=50000 needed to get to t24.62 ecm: 188/188 curves on C80, B1=50K, B2=gmpecm default, ETA: 0 sec fac: setting target pretesting digits to 24.62 fac: t15: 34.26 fac: t20: 10.02 fac: t25: 0.93 fac: t30: 0.06 fac: estimated sum of completed work is t24.64 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds: 85% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using SSE2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress ( 4 threads): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) Code:
$ ./yafu v v 03/24/20 14:54:44 v1.34.5 @ math20, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.1.2 detected Intel(R) Core(TM) i54570S CPU @ 2.90GHz detected L1 = 32768 bytes, L2 = 6291456 bytes, CL = 64 bytes measured cpu frequency ~= 2893.276310 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits div: primes less than 10000 rho: x^2 + 3, starting 1000 iterations on C80 rho: x^2 + 2, starting 1000 iterations on C80 rho: x^2 + 1, starting 1000 iterations on C80 pm1: starting B1 = 150K, B2 = gmpecm default on C80 fac: setting target pretesting digits to 24.62 fac: estimated sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t24.62 ecm: 32/32 curves on C80, B1=2K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 1.07 fac: t20: 0.04 fac: estimated sum of completed work is t15.19 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t24.62 ecm: 76/76 curves on C80, B1=11K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 7.40 fac: t20: 1.06 fac: t25: 0.05 fac: estimated sum of completed work is t20.25 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 187 more curves at B1=50000 needed to get to t24.62 ecm: 188/188 curves on C80, B1=50K, B2=gmpecm default, ETA: 0 sec fac: setting target pretesting digits to 24.62 fac: t15: 34.26 fac: t20: 10.02 fac: t25: 0.93 fac: t30: 0.06 fac: estimated sum of completed work is t24.64 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds: 85% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using SSE2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress ( 4 threads): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== 36150 rels found: 16473 full + 19677 from 343453 partial, (13629.81 rels/sec) sieving required 64261 total polynomials trial division touched 6551746 sieve locations out of 42114088960 squfof: 0 failures, 218488 attempts, 1769438 outside range, 1239973 prp, 207029 useful total reports = 6551746, total surviving reports = 4092848 total blocks sieved = 1285220,avg surviving reports per block = 3.18 QS elapsed time = 30.9348 seconds. ==== post processing stage (msieve1.38) ==== begin with 424829 relations reduce to 90315 relations in 9 passes attempting to read 90315 relations recovered 90315 relations recovered 48552 polynomials attempting to build 48489 cycles found 48489 cycles in 4 passes distribution of cycle lengths: length 1 : 19202 length 2 : 14652 length 3 : 8320 length 4 : 3749 length 5 : 1543 length 6 : 660 length 7 : 251 length 9+: 112 largest cycle: 12 relations matrix is 47184 x 48489 (8.7 MB) with weight 1892112 (39.02/col) sparse part has weight 1892112 (39.02/col) filtering completed in 4 passes matrix is 36883 x 36947 (6.8 MB) with weight 1474089 (39.90/col) sparse part has weight 1474089 (39.90/col) saving the first 48 matrix rows for later matrix is 36835 x 36947 (5.7 MB) with weight 1235125 (33.43/col) sparse part has weight 1114954 (30.18/col) matrix includes 64 packed rows using block size 14778 for processor cache size 6144 kB commencing Lanczos iteration memory use: 4.9 MB lanczos halted after 584 iterations (dim = 36831) recovered 14 nontrivial dependencies Lanczos elapsed time = 2.7926 seconds. Sqrt elapsed time = 0.0323 seconds. SIQS elapsed time = 33.7602 seconds. pretesting / qs ratio was 0.19 Total factoring time = 40.3479 seconds ***factors found*** P40 = 3104758941649954796179093599696620654807 P41 = 10863031838216972467057273004441996191511 ans = 1 >> I compiled YAFU with no options; (make x86_64). I didn't try the wip branch today, but I haven't been able to compile it at all on this machine for quite some time. I will try to play with this some more soon. 
20200324, 19:48  #69  
"Ben"
Feb 2007
110110100001_{2} Posts 
Quote:


20200324, 20:05  #70 
Aug 2006
Monza, Italy
1001001_{2} Posts 
Does factor(2) even invoke GMP?

20200324, 20:11  #71 
"Ben"
Feb 2007
3·1,163 Posts 

20200324, 20:30  #72 
Aug 2006
Monza, Italy
73 Posts 
I tried factor(p) on primes of various size on my almostworking build. It apparently segfaults for all primes below 10000 and succeeds for all primes above. It also seems to segfault for all factorizations whose input factors in such small primes, and not otherwise. That would explain why "tune" succeeds, that being focused on products of two large primes. This hypothesis is also consistent with my previous segfaults, including the C89 divisible by 5.
Last fiddled with by RedGolpe on 20200324 at 20:38 
20200324, 20:33  #73  
"Ben"
Feb 2007
3×1,163 Posts 
Quote:


20200324, 20:53  #74 
Aug 2006
Monza, Italy
1001001_{2} Posts 
I just discovered that factor(2^308+97) also fails but has no factors below 10000. However, it fails with
Code:
>> factor(2^308+97) fac: factoring 521481209941628438084722096232800809229175908778479680162851955034721612739414196782949728353 fac: using pretesting plan: normal fac: using specified qs/gnfs crossover of 93 digits fac: using specified qs/snfs crossover of 75 digits div: primes less than 10000 fmt: 1000000 iterations rho: x^2 + 3, starting 200 iterations on C93 rho: found prp6 factor = 785033 rho: x^2 + 3, starting 200 iterations on C87 rho: x^2 + 2, starting 200 iterations on C87 rho: x^2 + 1, starting 200 iterations on C87 nfs: searching for brent special forms... nfs: input divides 2^308 + 97 Segmentation fault (core dumped) Code:
>> factor(2) fac: factoring 2 fac: using pretesting plan: normal fac: using specified qs/gnfs crossover of 93 digits fac: using specified qs/snfs crossover of 75 digits div: primes less than 10000 Segmentation fault (core dumped) 
20200324, 20:58  #75 
"Ed Hall"
Dec 2009
Adirondack Mtns
3763_{10} Posts 
For the wip branch I have to change the "CC = gcc7.3.0" to "CC = gcc" since my gcc is "gcc version 7.5.0 (Ubuntu 7.5.03ubuntu1~18.04)."
With the wip branch I get the following with either version of GMP: Code:
factor/rho.o: In function `_trail_zcnt64': /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' factor/squfof.o: In function `_lead_zcnt64': /home/math20/Math/yafuwip2/include/arith.h:110: undefined reference to `_BitScanReverse64' arith/arith3.o: In function `_trail_zcnt64': /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' arith/monty.o: In function `mulmod128': /home/math20/Math/yafuwip2/arith/monty.c:416: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:423: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:423: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:424: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:428: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:428: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:429: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:429: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:430: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:431: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:440: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:440: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:441: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:449: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:449: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:450: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:455: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:455: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:456: undefined reference to `_umul128' /home/math20/Math/yafuwip2/arith/monty.c:456: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:457: undefined reference to `_addcarry_u64' /home/math20/Math/yafuwip2/arith/monty.c:458: undefined reference to `_addcarry_u64' top/eratosthenes/primes.o: In function `_trail_zcnt64': /home/math20/Math/yafuwip2/include/arith.h:102: undefined reference to `_BitScanForward64' collect2: error: ld returned 1 exit status Makefile:359: recipe for target 'all' failed make: *** [all] Error 1 Code:
$ ./yafu v v 03/24/20 16:47:09 v1.34.5 @ math20, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.1.2 detected Intel(R) Core(TM) i54570S CPU @ 2.90GHz detected L1 = 32768 bytes, L2 = 6291456 bytes, CL = 64 bytes measured cpu frequency ~= 2893.255040 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits div: primes less than 10000 rho: x^2 + 3, starting 1000 iterations on C80 rho: x^2 + 2, starting 1000 iterations on C80 rho: x^2 + 1, starting 1000 iterations on C80 pm1: starting B1 = 150K, B2 = gmpecm default on C80 fac: setting target pretesting digits to 24.62 fac: estimated sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t24.62 ecm: 32/32 curves on C80, B1=2K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 1.07 fac: t20: 0.04 fac: estimated sum of completed work is t15.19 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t24.62 ecm: 76/76 curves on C80, B1=11K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 7.40 fac: t20: 1.06 fac: t25: 0.05 fac: estimated sum of completed work is t20.25 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 187 more curves at B1=50000 needed to get to t24.62 ecm: 188/188 curves on C80, B1=50K, B2=gmpecm default, ETA: 0 sec fac: setting target pretesting digits to 24.62 fac: t15: 34.26 fac: t20: 10.02 fac: t25: 0.93 fac: t30: 0.06 fac: estimated sum of completed work is t24.64 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds: 85% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using AVX2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress ( 4 threads): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) 
20200326, 16:00  #76 
"Ben"
Feb 2007
3×1,163 Posts 
gmp6.2.0 has a new lazy allocation strategy that makes it even more dangerous to access mpz_t internals directly (like _mp_d). I was bad and had some code accessing internals... that's what was causing the problem.
Should be fixed now in /branches/wip r382. I tested the following makes in gcc 7.3.0 NFS=1 USE_SSE41=1 NFS=1 USE_AVX2=1 NFS=1 USE_AVX2=1 USE_BMI2=1 NFS=1 USE_AVX2=1 SKYLAKEX=1 
20200326, 16:21  #77 
Aug 2006
Monza, Italy
73 Posts 
I tried again but I can't manage "make" to work, apparently with any combination of the flags NFS=1 SKYLAKEX=1 USE_BMI2=1 USE_AVX2=1. At least, all tries with various flags seem to produce the same error:
Code:
redgolpe@c2018:~/yafu$ make NFS=1 SKYLAKEX=1 USE_BMI2=1 USE_AVX2=1 gcc g DUSE_BMI2 DUSE_AVX2 DUSE_AVX512F DUSE_AVX512BW march=skylakeavx512 mbmi2 mbmi DUSE_BMI2 DUSE_AVX2 DUSE_SSE41 mavx2 DUSE_SSE41 m64 msse4.1 DUSE_NFS O2 fomitframepointer Wall I. Iinclude Itop/aprcl Itop/ I../msieve/zlib I../gmp/include I../gmpecm/include/ c o factor/qs/msieve/lanczos.o factor/qs/msieve/lanczos.c In file included from include/qs.h:30:0, from factor/qs/msieve/lanczos.c:20: include/cofactorize.h:1:1: error: version control conflict marker in file <<<<<<< .mine ^~~~~~~ include/cofactorize.h:228:1: error: expected identifier or ‘(’ before ‘’ token  .r0 ^~ In file included from factor/qs/msieve/lanczos.c:20:0: include/qs.h:182:3: warning: data definition has no type or storage class } qs_params; ^~~~~~~~~ include/qs.h:182:3: warning: type defaults to ‘int’ in declaration of ‘qs_params’ [Wimplicitint] include/qs.h:824:1: error: unknown type name ‘qs_params’; did you mean ‘tiny_qs_params’? qs_params sieve_params; ^~~~~~~~~ tiny_qs_params factor/qs/msieve/lanczos.c: In function ‘yafu_block_lanczos_core’: factor/qs/msieve/lanczos.c:1245:5: warning: null argument where nonnull required (argument 1) [Wnonnull] fprintf(NULL, "linear algebra completed %u " ^~~~~~~ factor/qs/msieve/lanczos.c: In function ‘yafu_read_lanczos_state’: factor/qs/msieve/lanczos.c:854:2: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [Wunusedresult] fread(&read_n, sizeof(uint32), (size_t)1, dump_fp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Makefile:369: recipe for target 'factor/qs/msieve/lanczos.o' failed make: *** [factor/qs/msieve/lanczos.o] Error 1 Last fiddled with by RedGolpe on 20200326 at 16:21 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
How I Install CADONFS onto my Ubuntu Machines  EdH  EdH  3  20190624 03:42 
How I Install GMPECM onto my Ubuntu Machines  EdH  EdH  12  20190416 09:28 
How I Install msieve onto my Ubuntu Machines  EdH  EdH  0  20180223 14:43 
How I Install ggnfs onto my Ubuntu Machines  EdH  EdH  0  20180222 03:31 
How I Install GMP onto my Ubuntu Machines  EdH  EdH  0  20180221 23:48 