mersenneforum.org  

Go Back   mersenneforum.org > Prime Search Projects > No Prime Left Behind

Closed Thread
 
Thread Tools
Old 2008-02-29, 07:24   #56
gd_barnes
 
gd_barnes's Avatar
 
May 2007
Kansas; USA

235458 Posts
Default

Quote:
Originally Posted by IronBits View Post
Would it be possible to get some work for port 5000 so I can test the CentOS 4.5 64-bit (Q6600 w/8GB of ram) Server setup and see how that's going to work out please?
top-5000 range

On my port 500 Windows XP SP2 'Server' where we are cleaning up 'Gary's mess' ;)
If I use maxConnections = 60 I don't seem to be having any problems.
Virtual memory = 120,000
Peak memory = 57,000
Peak Page file = 55,000
IronBits,

I've just now finished sieving k=300-400 for n=260K-600K. Friday night, I can get you some top-5000 work on that k-range. (It'll take me a while to remove factors, determine k's that need to be removed due to reservations, etc.) If it goes well, would you like to use this port 5000 server for the next rally? If so, we can leave it premanently there.

Alternatively, if you want some work sooner, I can post n=395K-400K for k=400-1001 from drive 1 on Friday morning. I just figured it'd be easier to give you work that we'll use for the next rally so we aren't swapping k or n-ranges in and out of the server.


G
gd_barnes is offline  
Old 2008-02-29, 12:51   #57
IronBits
I ♥ BOINC!
 
IronBits's Avatar
 
Oct 2002
Glendale, AZ. (USA)

21318 Posts
Default

Sure, that will be fine. I can wait...
IronBits is offline  
Old 2008-02-29, 18:52   #58
gd_barnes
 
gd_barnes's Avatar
 
May 2007
Kansas; USA

235458 Posts
Default

Quote:
Originally Posted by IronBits View Post
Sure, that will be fine. I can wait...
Hi IronBits,

The k=300-400 sieve file is now complete and ready to send after I break off an appropriate-sized chunk for you. Karsten will be getting me some info. on the last rally to determine size needs for the next 2 weeks including a rally for next weekend.

Would you like a small piece for testing first? If so, do you know how many k/n pairs you'd like to test with? FYI, it's about 1750 k/n pairs for every 1000n.

I wasn't clear if this server had been tested yet. Either way, I'll send you a range starting at n=332K. If you want others to test, later on I can move two drive 1 cores over to your server for test purposes.


Gary
gd_barnes is offline  
Old 2008-02-29, 21:50   #59
IronBits
I ♥ BOINC!
 
IronBits's Avatar
 
Oct 2002
Glendale, AZ. (USA)

3×7×53 Posts
Default

Whatever you want to do is fine with me.
If it runs into problems over there in CentOS 4.5 64bit, I'll just run it over here on XP SP2 32bit with tcpip.sys patched to 1,000. ;)

I would like the 5000 range on the Linux Server and all the other stuff on the windows server, but I can put multiple ports on either box.

As to how many k/n pairs I want, I have no answer. I don't have a large pharm of computers I once had to chew threw the work.
Depends on how many folks are wanting to come get work from either one of my servers on ports 500 (lower ranges) or 5000 (top-5000).

I think you could put everyone on my one server and it would handle all of it, so that's not a concern that I have. :)
Having redundant servers so if one went down, lost connection, network goes down, power goes off etc., folks have a backup to switch to, is always a good idea. :)

Last fiddled with by IronBits on 2008-02-29 at 21:56
IronBits is offline  
Old 2008-02-29, 22:15   #60
gd_barnes
 
gd_barnes's Avatar
 
May 2007
Kansas; USA

5×2,017 Posts
Default

Quote:
Originally Posted by IronBits View Post
Whatever you want to do is fine with me.
If it runs into problems over there in CentOS 4.5 64bit, I'll just run it over here on XP SP2 32bit with tcpip.sys patched to 1,000. ;)

I would like the 5000 range on the Linux Server and all the other stuff on the windows server, but I can put multiple ports on either box.

As to how many k/n pairs I want, I have no answer. I don't have a large pharm of computers I once had to chew threw the work.
Depends on how many folks are wanting to come get work from either one of my servers on ports 500 (lower ranges) or 5000 (top-5000).

I think you could put everyone on my one server and it would handle all of it, so that's not a concern that I have. :)
Having redundant servers so if one went down, lost connection, network goes down, power goes off etc., folks have a backup to switch to, is always a good idea. :)
OK, I'll send you a large range of k=300-400 for n>332K (top-5000) to feed to one of your servers. Since things have been going well on your other server(s), sending a small range would just waste time.

I need to do some calculations and finish work first so it'll be 1-2 hours yet. I want to give you about 2 weeks work and I'd like that to include a rally the weekend of the 8th.

Just to confirm so that I can test it:
It is port 5000.
It is currently empty (i.e. no k=400-1001 work).

I'm sorry, there were so many servers flying around. Can you give me the name of your server? To be specific, I need to fill in the ? below:

Code:
-- server location
server = ?
port = 5000
Thanks for offering to run the servers!


Gary
gd_barnes is offline  
Old 2008-02-29, 23:38   #61
IronBits
I ♥ BOINC!
 
IronBits's Avatar
 
Oct 2002
Glendale, AZ. (USA)

3·7·53 Posts
Default

-- server location: Phoenix, AZ. USA
server = llrnet.no-ip.info
port = 5000 (top-5000 - waiting on knpairs.txt)
port = 400 (not running yet due to no knpairs.txt)
port = 500 (Gary's mess we are cleaning up and has lots of work)

Last fiddled with by IronBits on 2008-02-29 at 23:44
IronBits is offline  
Old 2008-03-01, 01:40   #62
gd_barnes
 
gd_barnes's Avatar
 
May 2007
Kansas; USA

5·2,017 Posts
Default

Quote:
Originally Posted by IronBits View Post
-- server location: Phoenix, AZ. USA
server = llrnet.no-ip.info
port = 5000 (top-5000 - waiting on knpairs.txt)
port = 400 (not running yet due to no knpairs.txt)
port = 500 (Gary's mess we are cleaning up and has lots of work)

Very good. Thanks for the info.

I just now sent you a PM with a link for k=300-400 for n=340K-400K.

I'll post n=320K-340K for manual reservations in n=2K pieces to fill in that reservation range at Primesearch as well as a few lower n-ranges.

Thanks again for hosting!


Gary
gd_barnes is offline  
Old 2008-03-01, 03:32   #63
IronBits
I ♥ BOINC!
 
IronBits's Avatar
 
Oct 2002
Glendale, AZ. (USA)

3×7×53 Posts
Default

Ok, it's up and running.
It would be comforting if some of you would test to make sure you can get/send work.
My clients can get/send work locally.
Thanks.
IronBits is offline  
Old 2008-03-01, 03:36   #64
IronBits
I ♥ BOINC!
 
IronBits's Avatar
 
Oct 2002
Glendale, AZ. (USA)

3×7×53 Posts
Default

connection request from 75242c52:1384 (socket 6)
Proposing pair 333/340010 to Flatlander
connection closed (socket 6)
-----------------------------------------------
It's alive! :)
IronBits is offline  
Closed Thread

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
LLRnet and PRPnet servers for automated LLR mdettweiler Twin Prime Search 229 2020-03-29 06:53
LLRnet servers for NPLB kar_bon No Prime Left Behind 1343 2014-08-20 09:38
LLRnet servers for CRUS gd_barnes Conjectures 'R Us 39 2008-07-15 10:26
New LLRnet servers discussion IronBits Conjectures 'R Us 11 2008-03-20 03:43
Follow up on LLRnet servers needed em99010pepe No Prime Left Behind 20 2008-02-29 00:01

All times are UTC. The time now is 01:15.

Tue Mar 31 01:15:13 UTC 2020 up 5 days, 22:48, 0 users, load averages: 1.42, 1.36, 1.34

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.