mersenneforum.org  

Go Back   mersenneforum.org > Great Internet Mersenne Prime Search > Data > Marin's Mersenne-aries

Reply
 
Thread Tools
Old 2004-03-27, 07:58   #1
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Question Status of p-1....

Each time the new status files come out from now on, I will post a new status report of how mersenne-aries is going. My original idea was to start from 13M and clear out all the exponents that haven't been p-1 tested ahead of the leading edge of double checking. However, since then I have become a little more confident (mostly due to my new P4) and have decided to start at 12.3M instead.

Anyone who want to help out is more than welcome to. Just reserve one of the blocks of exponents that I have posted and put it at the top of your worktodo.ini file. However, I must warn those of you who wish to join that p-1 testing, when done properly, requires a lot of RAM. Therefore, if you have less that 250mb of RAM allocated to prime95, I would suggest that this isn't the type for you. This is because most of the factors that are found by p-1 testing are found during stage 2. Therefore, if you only have a small amount of RAM allocated (eg 50mb) you will be missing factors that really should have been found.
dave_0273 is offline   Reply With Quote
Old 2004-03-27, 08:01   #2
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Default

Status using the 16th March Status Files

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
	   1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           7
           9         130
          10         489
          11        2066
          12        3699
          13        1043
          14         904
          15         972
          16        1021
          17        1107
          18        1199
          19        1485
          20        1015
          21         355
          22         146
          23          44
          24           0
Same as above, but 12-14M is broken up into 0.1M ranges

Code:
	12.0    393
	12.1    411
	12.2    448
	12.3    325
	12.4    417
	12.5    354
	12.6    351
	12.7    327
	12.8    375
	12.9    298
	13.0     75
	13.1     80
	13.2    125
	13.3    126
	13.4    158
	13.5    104
	13.6     76
	13.7    125
	13.8     98
	13.9     76

Last fiddled with by dave_0273 on 2004-03-27 at 08:10
dave_0273 is offline   Reply With Quote
Old 2004-03-27, 08:19   #3
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

7268 Posts
Default

Status using the 27th March status files..

Status broken up into 1M ranges...

Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           6
           9         105
          10         390
          11        1701
          12        3329
          13         933
          14         904
          15         972
          16        1020
          17        1103
          18        1197
          19        1490
          20        1033
          21         383
          22         159
          23          79
          24           0
12-14M broken up into 0.1M ranges

Code:
	12.0    393
	12.1    411
	12.2    448
	12.3      0
	12.4    372
	12.5    354
	12.6    351
	12.7    327
	12.8    375
	12.9    298
	13.0     13
	13.1     32
	13.2    125
	13.3    126
	13.4    158
	13.5    104
	13.6     76
	13.7    125
	13.8     98
	13.9     76
As you can see, I have cleared out all exponents in the 12.3-12.4M range. I am about halfwayish through 12.4-12.5M. Also, the majority of the 13.0-13.2M range has also been cleared out. The 45 that are still there are assigned through mersenne-aries and should be finished soon.

Now that I have decided to start at 12.3M instead of 13.0M, I will now post some lower ranges to p-1 factor.

I do realise that there are a lot of exponents in the 11-12M range, however seeing as these are on primenet already, I think that we should leave them alone. When double checking hits the 12.3M range, it should speed up slightly. 1) Because they are already p-1 tested so a slower computer doesn't have to run a lengthy p-1 test. 2) We should be able to clear out about 4% of exponents by finding factors.
dave_0273 is offline   Reply With Quote
Old 2004-04-12, 08:21   #4
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2·5·47 Posts
Default

Status using the 12th April status files.

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
	   1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           2
           9          81
          10         301
          11        1213
          12        2856
          13         838
          14         904
          15         972
          16        1020
          17        1102
          18        1197
          19        1496
          20        1049
          21         416
          22         184
          23         108
          24           0
Same as above, but each range is only 0.1M and only showing from 12M-14M. The third column shows the change in the number of exponents compared to the last status files.

Code:
       0.1M  NUMBER  CHANGE	
        12.0    393     0
	12.1    411   -22
	12.2    348  -100
	12.3      0     0
	12.4      0  -372
	12.5    354     0
	12.6    351     0
	12.7    327     0
	12.8    375     0
	12.9    297    -1
	13.0      0   -13
	13.1      0   -32
	13.2     75   -50
	13.3    126     0
	13.4    158     0
	13.5    104     0
	13.6     76     0
	13.7    125     0
	13.8     98     0
	13.9     76     0
The 13.0-13.2M range has now been completely cleared out. The 12.3-12.5M range has also been completely cleared out. I am curently working on the 12.2-12.3M range and should be finished in about a weeks time.
dave_0273 is offline   Reply With Quote
Old 2004-04-21, 04:35   #5
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2·5·47 Posts
Default

Status using the 20th April status files.

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           1
           9          74
          10         261
          11         837
          12        2678
          13         788
          14         904
          15         971
          16        1019
          17        1103
          18        1197
          19        1498
          20        1059
          21         439
          22         200
          23         124
          24           0
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
0.1MRANGE NUMBER  CHANGE
    12.0    393     0
    12.1    411     0
    12.2    170  -178
    12.3      0     0
    12.4      0     0
    12.5    354     0
    12.6    351     0
    12.7    327     0
    12.8    375     0
    12.9    297     0
    13.0      0     0
    13.1      0     0
    13.2     25   -50
    13.3    126     0
    13.4    158     0
    13.5    104     0
    13.6     76     0
    13.7    125     0
    13.8     98     0
    13.9     76     0
This week was a pretty slow week for mersenne-aries. Most of my computers were helping out LHM so I didn't get a whole lot of p-1 work done. The 12.2-12.3M range is done, I just have to submit it.

Everything up to 12.5M is now on primenet available for doublechecking. I don't think that it is a good idea to work manually on ranges that are currently on primenet (due to the fact that work may be duplicated), so 12.0-12.2 will remain untouched by mersenne-aries. However, there are a number of people using the semi-automated method of p-1 testing so these exponents may still get p-1 tested yet.

As soon as I have finished my work with LMH, I will start work on the 12.5-12.6M range.

If you would like to help out mersenne-aries, just reserve on the of blocks of work in the forum by posting in it. However, I would suggest letting prime95 use a large amount of RAM so that proper bounds can be run during stage 2.
dave_0273 is offline   Reply With Quote
Old 2004-04-30, 04:05   #6
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2·5·47 Posts
Default

Status using 29th April status files

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           1
           9          56
          10         207
          11         684
          12        2558
          13         788
          14         904
          15         970
          16        1018
          17        1103
          18        1198
          19        1499
          20        1069
          21         451
          22         217
          23         139
          24           0
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
   0.1RANGE  NUMBER  CHANGE
     12.0     393     0
     12.1     411     0
     12.2      60  -110
     12.3       0     0
     12.4       0     0
     12.5     354     0
     12.6     351     0
     12.7     317   -10
     12.8     375     0
     12.9     297     0
     13.0       0     0
     13.1       0     0
     13.2      25     0
     13.3     126     0
     13.4     158     0
     13.5     104     0
     13.6      76     0
     13.7     125     0
     13.8      98     0
     13.9      76     0
A bit of a slow week for mersenne-aries. However, I have now finished up my LMH work and all my computers are now back to p-1 testing. I have finished the 12.2-12.3M range (it has been for some time now) I am just having troubles getting to the computer to get the results file. I am about a third the way through the 12.5-12.6M range. It will probably take me about another 2 weeks to finish.
dave_0273 is offline   Reply With Quote
Old 2004-05-12, 11:21   #7
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

1110101102 Posts
Default

Status using 5th May, 2004 status files.

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M       NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           1
           9          43
          10         185
          11         507
          12        2083
          13         788
          14         904
          15         970
          16        1018
          17        1103
          18        1198
          19        1499
          20        1077
          21         461
          22         226
          23         163
          24           2
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
 0.1RANGE  NUMBER  CHANGE
   12.0      389      -4
   12.1      405      -6
   12.2       59      -1
   12.3        0       0
   12.4        0       0
   12.5        0    -354
   12.6      351       0
   12.7      207    -110
   12.8      375       0
   12.9      297       0
   13.0        0       0
   13.1        0       0
   13.2       25       0
   13.3      126       0
   13.4      158       0
   13.5      104       0
   13.6       76       0
   13.7      125       0
   13.8       98       0
   13.9       76       0
I just finished off the 12.5-12.6M range. I am now working on the 12.6-12.7M range. However, there will be a slow down now because of the FFT change that kicks in at 12.65M. The entire 12.7-12.8M range is now posted on the forums. The majority of it I think is assigned but there are still 4 more blocks of 50 to finish off that range.
dave_0273 is offline   Reply With Quote
Old 2004-05-27, 05:19   #8
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Default

Status using the 26th May status files...

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.


Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           1
           9          40
          10         170
          11         302
          12        1649
          13         780
          14         899
          15         967
          16        1016
          17        1103
          18        1200
          19        1505
          20        1084
          21         471
          22         236
          23         176
          24          19
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
   0.1M RANGE  NUMBER   CHANGE
      12.0       389       0
      12.1       405       0
      12.2        59       0
      12.3         0       0
      12.4         0       0
      12.5         0       0
      12.6         0    -351
      12.7       124     -83
      12.8       375       0
      12.9       297       0
      13.0         0       0
      13.1         0       0
      13.2        25       0
      13.3       126       0
      13.4       156      -2
      13.5       101      -3
      13.6        76       0
      13.7       124      -1
      13.8        97      -1
      13.9        75      -1
I just finished off the 12.6-12.7M range. 12.7-12.8M is now all assigned through the forum. I am currently working the 12.8-12.9M range and should be finished in about 2 weeks. The 12.9-13.0M range is now on the forum. The majority has already been reserved but there are still a few blocks left. We have to keep moving though because the leading edge of double checking is catching up to us much quicker than I thought that it would. The manual check-in page is now working again so if anyone has results that need to be submitted, you will be able to do that now.
dave_0273 is offline   Reply With Quote
Old 2004-06-05, 09:25   #9
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Default

Status using the 4th June status files.....

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           0
           9          37
          10         134
          11         265
          12        1171
          13         771
          14         899
          15         967
          16        1016
          17        1105
          18        1200
          19        1506
          20        1087
          21         479
          22         244
          23         196
          24          42
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
 0.1M RANGE  NUMBER   CHANGE
   12.0       376      -13
   12.1       404       -1
   12.2        59        0
   12.3         0        0
   12.4         0        0
   12.5         0        0
   12.6         0        0
   12.7        31      -93
   12.8       275     -100
   12.9        26     -271
   13.0         0        0
   13.1         0        0
   13.2        16       -9
   13.3       126        0
   13.4       156        0
   13.5       101        0
   13.6        76        0
   13.7       124        0
   13.8        97        0
   13.9        75        0
I am still working on the 12.8-12.9M range and should be finished in just over a weeks time. 12.7-12.8M and 12.9-13.0M is now all assigned through the forum and except for the 50 or so exponents, is just about finished. Ranges from 13.2M-13.5M are now available through the forum.
dave_0273 is offline   Reply With Quote
Old 2004-06-13, 14:52   #10
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Default

Status using 12th June 2004 status files

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        CHANGE
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           0
           9          35
          10         110
          11         226
          12         844
          13         738
          14         899
          15         967
          16        1019
          17        1105
          18        1199
          19        1502
          20        1083
          21         485
          22         245
          23         207
          24          55
Same as above, but each range is only 0.1M and only showing from 12M-14M. For example, 12.2 represents the range of 12.2M to 12.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
 0.1M RANGE    NUMBER  CHANGE
     12.0       333      -43
     12.1       348      -56
     12.2        51       -8
     12.3         0        0
     12.4         0        0
     12.5         0        0
     12.6         0        0
     12.7         2      -29
     12.8       110     -165
     12.9         0      -26
     13.0         0        0
     13.1         0        0
     13.2         0      -16
     13.3       109      -17
     13.4       156        0
     13.5       101        0
     13.6        76        0
     13.7       124        0
     13.8        97        0
     13.9        75        0
The 110 exponents in the 12.8-12.9M range I have almost finished working on and I would expect to submit them within the next 2 days. There is just the 2 exponents left in the 12.7-12.8M range so I would expect them to also be completed by the time the next status files come out. 13.3-13.5M is now available through the forum.

We seem to have finished just in time, as I would expect everthing up to 13M to be released on primenet (just a guess - not gospel). It is also good to see that we have made significant process into the 13-14M exponents. I don't see a problem with keeping ahead of the leading edge of double checking if we keep up this pace.
dave_0273 is offline   Reply With Quote
Old 2004-06-24, 13:09   #11
dave_0273
 
dave_0273's Avatar
 
Oct 2003
Australia, Brisbane

2×5×47 Posts
Default

Status using 22nd June status files...

The first column is the range. For example, 8 represents 8M to 9M. The second column is the number of (unverified) exponents that haven't been p-1 tested.

Code:
           M        NUMBER
           1           0
           2           0
           3           0
           4           0
           5           0
           6           0
           7           0
           8           0
           9          33
          10          72
          11         195
          12         572
          13         645
          14         899
          15         967
          16        1015
          17        1103
          18        1199
          19        1501
          20        1083
          21         492
          22         248
          23         222
          24          67
Same as above, but each range is only 0.1M and only showing from 12M-15M. For example, 13.2 represents the range of 13.2M to 13.3M. The third column shows the change in the number of exponents compared to the last status files.

Code:
    0.1MRANGE  NUMBER   CHANGE
      12.0       319     -14
      12.1       233    -115
      12.2        20     -31
      12.3         0       0
      12.4         0       0
      12.5         0       0
      12.6         0       0
      12.7         0      -2
      12.8         0    -110
      12.9         0       0
      13.0         0       0
      13.1         0       0
      13.2         0       0
      13.3        51     -58
      13.4       121     -35
      13.5       101       0
      13.6        76       0
      13.7       124       0
      13.8        97       0
      13.9        75       0
      14.0        60       ?
      14.1        78       ?
      14.2        82       ?
      14.3        82       ?
      14.4        71       ?
      14.5        81       ?
      14.6       136       ?
      14.7       104       ?
      14.8       109       ?
      14.9        96       ?
Well, we were just in time. Everything up to 13M went on primenet just as we finished up the file couple of remaining p-1 tests. Everything up to 14M is now posted in the forum. I think that there are just 2 blocks left in the 13-14M range to be assigned. As soon as they are taken, I will start posting ranges in the 14-15M range. I would like to thank everyone who helps in mersenne-aries work. Since its start, we have saved hundreds of doublechecks from having to be done.
dave_0273 is offline   Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Status Primeinator Operation Billion Digits 5 2011-12-06 02:35
62 bit status 1997rj7 Lone Mersenne Hunters 27 2008-09-29 13:52
OBD Status Uncwilly Operation Billion Digits 22 2005-10-25 14:05
1-2M LLR status paulunderwood 3*2^n-1 Search 2 2005-03-13 17:03
Status of 26.0M - 26.5M 1997rj7 Lone Mersenne Hunters 25 2004-06-18 16:46

All times are UTC. The time now is 04:09.


Sun Aug 1 04:09:00 UTC 2021 up 8 days, 22:37, 0 users, load averages: 2.83, 2.44, 1.89

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.