20101019, 16:18  #1 
"Mark"
Apr 2003
Between here and the
6162_{10} Posts 
What are your CRUS plans?
This has been an interesting project due to the sheer amount of work available. There are many ways to attack the problem, whether you are trying to prove the conjecture for a single base, or trying to start as many new conjectures as you can. I'm curious to know what everyone is currently working on in this project if they have have future plans for their CPUs after their current work is completed.
To start things off, this is what I'm working on now: Currently: R928 to n=25000 Currently: Retests for b > 100, both Riesel and Sierpinski This is what I plan to work on in the future: Near Future: Retests for Generalized Woodalls for n < 4100 Near Future: Puzzle 10 (from Steven Harvey's website) Future: S63, finish the team drive to get the conjecture to n=10000 Future: Get R243, S42, S108 to n=25000 Future: Start all remaining conjectures for conjectured k < 1000 and bring them to n=25000 Some of these I will spend more time on than others. For example, by the time I'm done with R928, I will have spent more than 15 GHz CPU years on it. I expect to spend another GHz year on the retests for b > 100. S63 will take about 2.5 GHz years to get to n=10000 (presuming others complete their reservations). GWs for n < 4100 might only take a few GHz months. Puzzle 10 is openended so I don't know how much time I will spend on it. Although there are few conjectures to be started for conjectured k < 1000, the amount of time needed for that effort is unknown. I might not even get to it as others will pick a few k off before I get there. If I were to ask for anyone's help, it would be on S63 because it's rather boring work. 
20101019, 19:31  #2 
Jan 2006
Hungary
2^{2}×67 Posts 
I am taking Prime Riesel Conjectures to n = 200,000. That's going to take me through 2011.
Willem. 
20101019, 21:30  #3 
Sep 2006
187_{10} Posts 
I want to finish Sierp base 17, and take Sierp 19 as far as possible.
That's going to take me through 201* 
20101019, 23:01  #4 
A Sunny Moo
Aug 2007
USA (GMT5)
3×2,083 Posts 
Most of my computing firepower comes from my quad (Q6600 overclocked to 2.8GHz); as such, I generally plan its targets entirely separately from my dualcore (E4500, stock 2.2GHz).
Right now my "near future" goal for the quad is to get Sierp. base 6 completed to n=400K (the end of the current sieve file). On the more immediate scale, I will be finishing S6 to n=350K within 24 hours or so. After that, I'll move to NPLB port 9000 and will stay there until the end of the impending rally (for a total of ~2 weeks). I have been trying for ages to find a prime on the 5th Drive as I would like to get at least one before the drive ends; however, I am notoriously unlucky when it comes to finding NPLB primes, so I still haven't found one despite having passed the # of pairs that, according to Gary's odds of prime spreadsheet, "should" get me an expected one prime (in other words, ~62% chance of finding one). I'm hoping that 2 additional quadweeks on port 9000 will net me something. At the current n=~920K, it would be my biggest prime yet. (My current personal record is 157*2^8690731, found a couple years backand that one was actually found by Gary, though I reported it since he was "loaning" me a bit of CPU resources at the time.) I'm not sure what I'll do after I get S6 to n=400K, but I may go back to trying to prove some of the 1 or 2k conjectures <32, which was my longterm target a ways back. Alternatively, I might tackle one of the base 16 drives...not sure yet at this point. As for my dualcore, I've currently got one core working on the TPS sieving drive (it's one of the few sieves that my 32bit OS can do efficiently, since tpsieve64bit is actually slower than the 32bit version due to lack of SSE2 optimizations). The other core is working towards collecting a full set of PrimeGrid bronze badges. 
20101020, 04:23  #5 
Mar 2010
Hampshire, UK
3×17 Posts 
It’s been over 6 months since I joined here. My reasoning behind choosing reservations was that (instead of a single reservation that I would throw all my CPU power at and finish asap) I would have 45 reservations at any given time and alternate working between them. That would be a variety of reservations (some lown, some highn, some singlek, some fewk, some multik) and try to finish each in a timeframe of about 3 months.
Over time I adopted two trends: 1. Going for higher b or higher n. Since my only top5000 prime dropped off the list during the summer I’ve been steadily upping my reservations to get another one. While I had a couple good finds, they were short of the threshold. I’ll keep trying and all my later reservations have a good portion of the work within top5000 territory. 2. Combining Riesel and Sierp work for the same base. Even if I’m not testing myself I try to reserve bases that are suitable for combined sieving. Sieving that way takes longer but each side goes deeper and when I or whoever else starts testing there’s a benefit from more optimal sieving. Currently I have two bases that I extended testing from my initial reservation, S35 (many k’s, low n) and S55 (few k’s, high n). I consider both lowpriority; each has been assigned one core on a machine that is not on 24/7 so updates should be expected on a “whenever” basis. My current main reservation is R/S148 with 14k’s remaining at n=50K, on pause pending further sieving. I will take it to n=100K and depending on the number of k’s eliminated maybe n=150K. That should keep me busy until the end of the year. For future work. There was a discussion in the PRPnet server thread about options and directions for a team effort. My preference would be to test the singlek bases above n=100K to 250K (or whatever the choice would be) and hopefully knock a few of them. If (when) such an effort is started I would focus on that instead of individual reservations. If not I will keep choosing work based on what I described above and if a top5000 prime comes I will also consider getting some more of the less attractive work (bases 39, 40). 
20101020, 05:50  #6 
May 2007
Kansas; USA
10279_{10} Posts 
I have to ask: What is the reasoning behind only testing prime k's for a conjecture that must be prime? It's like testing all k's divisible by 3 for a conjecture that must be divisible by 3. I'm just curious as to the arbitrary exclusion of composite k's.

20101020, 15:53  #7  
A Sunny Moo
Aug 2007
USA (GMT5)
3·2,083 Posts 
Quote:


20101020, 17:00  #8 
May 2007
Kansas; USA
24047_{8} Posts 
I'm working on various bases <=32 with few k's remaining at high nlevels plus testing new bases that have <= 15 k's remaining at n=5K. On the latter search, I've about finished all bases with <= 9 k's remaining and am about to start on bases with 10 k's remaining at n=5K.

20101020, 18:04  #9  
"Mark"
Apr 2003
Between here and the
2·3·13·79 Posts 
Quote:


20101020, 18:55  #10 
May 2008
Wilmington, DE
2^{2}×23×31 Posts 
I'm working on getting all bases with 1 or 2 k's remaining to n=100K.
I should finish the 1ker's by the end of the year or earlier. The 2ker's will take me to mid to late 2011. After that, I'll either start more bases or work on getting all bases at least to n=100K, maybe both. 
20101020, 19:16  #11  
Jan 2006
Hungary
2^{2}·67 Posts 
Quote:
When I make reservations for a normal conjecture I only pick those k that are prime. Base 14 has Riesel Conjecture = 4 proven. Base 14 has Prime Riesel Conjecture = 14 proven, with: 2*14^41 3*14^11 5*14^196981 7*14^11 It makes me happy, Willem. 

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Plans for the end of the world  Oddball  Lounge  4  20110418 04:06 
how high will CRUS go  MiniGeek  Conjectures 'R Us  1  20101108 20:50 
Further Plans  Kosmaj  Riesel Prime Search  6  20090520 01:27 
Further Plans  Kosmaj  Riesel Prime Search  6  20060929 22:32 
64 bit plans  pyrodave  Software  17  20040605 12:27 