mersenneforum.org > Data Let's finish DC of old "dubious" claims of primes
 Register FAQ Search Today's Posts Mark Forums Read

 2021-12-30, 00:16 #12 tServo     "Marv" May 2009 near the Tannhäuser Gate 14378 Posts what do I have to do other than post to this thread the exponents I will do?
 2021-12-30, 03:18 #13 kriesel     "TF79LL86GIMPS96gpu17" Mar 2017 US midwest 688110 Posts Reserve here, as Double check using PRP with proof, as well. And we finish what we start. Last fiddled with by kriesel on 2021-12-30 at 03:20
 2021-12-31, 17:26 #14 kriesel     "TF79LL86GIMPS96gpu17" Mar 2017 US midwest 7×983 Posts List update Most of these I did a first test on, so the server won't issue DC to me. Code: PRP=1,2,87232913,-1,76,0 PRP=1,2,97970567,-1,76,0 PRP=1,2,103404713,-1,76,0 PRP=1,2,108575167,-1,77,0 PRP=1,2,110000017,-1,78,0 PRP=1,2,231695603,-1,79,0 PRP=1,2,276036017,-1,80,0 PRP=1,2,285754177,-1,80,0 PRP=1,2,315690521,-1,80,0 PRP=1,2,333333223,-1,81,0 I have reserved this one; 24% complete, 10.5 days remaining PRP=1,2,369452123,-1,81,0 PRP=1,2,852348659,-1,86,0 This was a dubious claim before it was a prediction of M52 Separately I am working on DC of the remaining Predict Mxx exponents. There are a lot of them, ~65 at the moment lacking DC. Last fiddled with by kriesel on 2021-12-31 at 18:22
2022-01-01, 15:54   #15
tServo

"Marv"
May 2009
near the Tannhäuser Gate

79910 Posts

Quote:
 Originally Posted by kriesel Most of these I did a first test on, so the server won't issue DC to me. Code: PRP=1,2,87232913,-1,76,0 PRP=1,2,97970567,-1,76,0 PRP=1,2,103404713,-1,76,0 PRP=1,2,108575167,-1,77,0 PRP=1,2,110000017,-1,78,0 PRP=1,2,231695603,-1,79,0 PRP=1,2,276036017,-1,80,0 PRP=1,2,285754177,-1,80,0 PRP=1,2,315690521,-1,80,0 PRP=1,2,333333223,-1,81,0 I have reserved this one; 24% complete, 10.5 days remaining PRP=1,2,369452123,-1,81,0 PRP=1,2,852348659,-1,86,0 This was a dubious claim before it was a prediction of M52 Separately I am working on DC of the remaining Predict Mxx exponents. There are a lot of them, ~65 at the moment lacking DC.
I have reserved to lowest 5 ( 87,xxx,xxx -> 110,xxx,xxx ). They will start running tonight.
I expect them to finish in about 3 days

2022-01-01, 16:12   #16
kriesel

"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

7×983 Posts

Quote:
 Originally Posted by tServo I have reserved to lowest 5 ( 87,xxx,xxx -> 110,xxx,xxx ).
Thank you. #6 would take about as long as those 5. Your reservations are the best GIMPS news I've seen yet this year.

2022-01-03, 16:21   #17
tServo

"Marv"
May 2009
near the Tannhäuser Gate

17·47 Posts

Quote:
 Originally Posted by kriesel Reserve here, as Double check using PRP with proof, as well. And we finish what we start.
This reservation did NOT work.
I just noticed when I submitted the first one done; it was a different exponent than the one you wanted.
It appears that it assigned a next higher exponent instead of the one I requested
so all 5 that I have done and are completing are off.

Yes, I did "double check with proof".
I just tried one again and again it went to an exponent just slightly higher.

Last fiddled with by tServo on 2022-01-03 at 16:23

2022-01-03, 16:23   #18
kriesel

"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

11010111000012 Posts

Quote:
 Originally Posted by tServo I have reserved to lowest 5 ( 87,xxx,xxx -> 110,xxx,xxx ). They will start running tonight.
Hmm. There is currently no sign of a PRPDC or current reservation on any of those 5:
PRP=1,2,87232913,-1,76,0
PRP=1,2,97970567,-1,76,0
PRP=1,2,103404713,-1,76,0
PRP=1,2,108575167,-1,77,0
PRP=1,2,110000017,-1,78,0

Quote:
 Originally Posted by tServo This reservation did NOT work. I just noticed when I submitted the first one done; it was a different exponent than the one you wanted. It appears that it assigned a next higher exponent instead of the one I requested so all 5 that I have done and are completing are off. Yes, I did "double check with proof". I just tried one again and again it went to an exponent just slightly higher.
Please try again, inserting the desired exponent into the online reservation form, twice, as shown in the attachment. Note, it only allows numerical digits, and will complain about any characters other than 0123456789 there, even spaces. Possibly it will refuse to issue an assignment in some cases, and you could just run it without a reservation. (It's not exactly poaching if no one else is assigned the exponent, or exponent & same computation type.) The preceding would work for any GIMPS PRP application: prime95, mprime, gpuowl, Mlucas.

Or, you could for the 5 lines above into a prime95/mprime worktodo of a PrimeNet-connected instance, follow Uncwilly's directions.
Attached Thumbnails

Last fiddled with by kriesel on 2022-01-03 at 16:44

 2022-01-04, 13:29 #19 tServo     "Marv" May 2009 near the Tannhäuser Gate 17×47 Posts I'm going to do the lowest one via a gpuowl -prp and see if that works. If that's ok then I'll start the other 4 tomorrow.
2022-01-05, 16:41   #20
tServo

"Marv"
May 2009
near the Tannhäuser Gate

17·47 Posts

Quote:
 Originally Posted by tServo I'm going to do the lowest one via a gpuowl -prp and see if that works. If that's ok then I'll start the other 4 tomorrow.
OK, I did that one and I believe it looks OK.
If you agree, I can start the other 4 this weekend. It may take a few days, tho to get final results.

2022-01-05, 18:06   #21
kriesel

"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

7·983 Posts

Quote:
 Originally Posted by tServo OK, I did that one and I believe it looks OK. If you agree, I can start the other 4 this weekend. It may take a few days, tho to get final results.
Thanks, looks good, please proceed with others.
I'm mostly working on DC of Predict Mxx now, and will post a list for those separately, after I thin them out a lot by DC by PRP/GEC/proof-gen of most if not all those that were first-time-tested by other users.

 2022-01-07, 21:44 #22 kriesel     "TF79LL86GIMPS96gpu17" Mar 2017 US midwest 7·983 Posts Update with detail Per https://mersenneforum.org/showpost.p...2&postcount=20 tServo will do these four, probably completing by mid January: PRP=1,2,97970567,-1,76,0 Kriesel did first PRP shifted type 1 PRP=1,2,103404713,-1,76,0 Kriesel did first PRP shifted type 1 PRP=1,2,108575167,-1,77,0 Kriesel did first PRP shifted type 1 PRP=1,2,110000017,-1,78,0 Kriesel did first LL shifted These are available except for 333333223: PRP=1,2,231695603,-1,79,0 Kriesel did first PRP shifted type 1 PRP=1,2,276036017,-1,80,0 Kriesel did first PRP shifted type 1 PRP=1,2,285754177,-1,80,0 Kriesel did first PRP shifted type 1 PRP=1,2,315690521,-1,80,0 Kriesel did first PRP shifted type 1 PRP=1,2,333333223,-1,81,0 Kriesel PRPDC/GEC/proof-gen 58% complete, ETA 2022-01-11 PRP=1,2,369452123,-1,81,0 Kriesel did first PRP unshifted type 1 PRP=1,2,852348659,-1,86,0 Kriesel did first PRP unshifted type 1 (those exponents not present in this update have a completed PRP/proof & Cert) Only 6 more to claim, each of which will take a while.

 Similar Threads Thread Thread Starter Forum Replies Last Post sweety439 sweety439 1 2020-12-21 14:08 Uncwilly Lounge 15 2020-04-14 18:35 wildrabbitt Miscellaneous Math 11 2015-03-06 08:17 Batalov And now for something completely different 12 2014-11-16 19:03 nitai1999 Software 7 2004-08-26 18:12

All times are UTC. The time now is 07:04.

Fri Oct 7 07:04:49 UTC 2022 up 50 days, 4:33, 0 users, load averages: 0.80, 1.06, 1.11