20120417, 11:13  #34  
Just call me Henry
"David"
Sep 2007
Liverpool (GMT/BST)
2^{3}·19·41 Posts 
Quote:
I think I have done the change from 30 to 210 correctly. This will probably limit n to >210 now. If you rewrite can I suggest you have primes in blocks as well as ranges of k. Currently those arrays use lots of memory if sieving to 1G(in fact can't go quite that far for 6tuples). Would it be possible to have portions of ndx in the L2 cache as well as sieve? Last fiddled with by henryzz on 20120417 at 11:31 Reason: forgot attachment 

20120417, 13:45  #35  
Jun 2003
2×7×17×23 Posts 
Quote:
Quote:
Because of the way the sieving works, it requires that much memory. The good news it that, for the 5 and 6tuple versions, there really is no point in further sieving by NewPGen. You can directly feed the output to LLR. And you don't need to sieve that deep with the program itself, either. 

20120417, 14:50  #36  
Jun 2003
1010101100010_{2} Posts 
Quote:
Code:
n_mod: array[0..11] of byte = (207,51,183,39,177,141,123,9,57,81,93,99); Code:
nm := n_mod[ THE_N mod 12 ]; Code:
i:=5; 

20120418, 23:56  #37 
Just call me Henry
"David"
Sep 2007
Liverpool (GMT/BST)
2^{3}·19·41 Posts 
Didn't realize I had to change to mod 12 from mod 4 as well as 30 to 210.

20120419, 11:47  #38 
Mar 2004
3·127 Posts 
Hi Peter
Congratulations for your new discovery of the new quadruplet. This time you were quite lucky again: At k*2^9999 (k odd) there is on average a 4tuple every 375T. I am also searching for a 4tuple for some time. I my case I am sieving candidates of the form k* 2^10000. Our Name is similar and we have similar ideas… NewPGen I also use NewPGen for sieving and it is true that it cannot allocate a lot of memory. Besides that the algorithms are not optimal and there was no update since a long time. I assume that Jocelyn implemented NewPGen when he was a student and now he has a job, family and no time anymore. I did not experience that NewPGen can allocate more memory beyond 1G with the combined sieve. Could be that it is the case if you have more than 100M candidates. But in that case I would not be fast anyway. Below 1G, it uses a bitmap with one bit per entry. That is the fastest mode in NewPGen. After combining the sieve it uses an array or fast array. The array needs 8 Byte for one candidate and it performs a binary lookup if a sieved candidate is in the list. That means Log2(Number of candidates) lookups every time. If there is at least twice as much memory available, it uses fast array, which is a hashtable. In the best case one lookup is enough; in case of hash collisions it needs more. One of the worst disadvantages is, that NewPGen searches for k*2^n instead of k*15*2^n. Otherwise the array would be 15 times more dense. I will talk more about algorithmic improvements in a later post. I did not yet check, which improvement axn has already implemented in his code. Primorial or Power of 2? About 10 years ago I was searching for triplets and was using k*2^n with constant n and was quite alone with that. There was the common opinion that primorial are more efficient than simple powers. The Power of 2 is a special form where it much more efficient to sieve and prp the candidates. On the other hand, primorial are a product of the smallest primes so that they don’t need to be sieved anymore. So the density of candidates is much higher and a smaller range needs to be searched. I experienced, that powers of 2 is faster for twins and 3tuple; 4tuple are also faster, but the difference is not big anymore. For 5 and higher tuple I would recommend primorial. Some rough calculations about the expectations: 3 Tuple: Size: 10000 digits PRP test: 2 Seconds Optimal NewPGen Sieve depth: 10T Remaining candidates after sieving a range of 1T to 1G: 52500000 Range per one tuple: 3.5 T 4 Tuple: Size: 3030 digits PRP test: 0.15 Seconds Optimal NewPGen Sieve depth: 0.6T Remaining candidates after sieving a range of 1T to 1G: 2000000 Range per one tuple: 375 T 5 Tuple: Size: 1100 digits PRP test: 0.02 Seconds Optimal NewPGen Sieve depth: 1G Remaining candidates after sieving a range of 1T to 1G: 130000 Range per one tuple: 6400 T 6 Tuple: Size: 560 digits PRP test: 0.005 Seconds Optimal NewPGen Sieve depth: 1G Remaining candidates after sieving a range of 1T to 1G: 6000 Range per one tuple: 146000 T 7 Tuple: Size: 301 digits Remaining candidates after sieving a range of 1T to 1G: 500 Range per one tuple: 730000 T 8 Tuple: Size: 218 digits Remaining candidates after sieving a range of 1T to 1G: 35 Range per one tuple: 9750000 T Even if you sieve 6tuple only up to 1 Million, there are only 68000 candidates left, which can be prp tested within 6 minutes. It is not difficult to find a 3 tuple with 10000 digits; maybe 2 years with NewPGen and one core. But then primalty certification of the +5 is really hard. Depending on the software that could take some years. 
20120419, 20:12  #39  
Jun 2009
2^{2}×5^{2}×7 Posts 
Quote:
About proving the +5: The new version of PRIMO can use multiple CPUs when running under Linux. According to this table: http://www.ellipsa.eu/public/primo/primo.html a 10000 digit number should not take more than a few weeks on a fast machine. I really hope somebody will extend the sieve to longer ktuples as I am still trying to figure out some parts of the code. It's the main sieving procedure that I still just don't understand. EDIT: By the way, how do you calculate your "Range per one tuple" figures? I get much higher numbers when I try to estimate the k range needed per tuple. Last fiddled with by PuzzlePeter on 20120419 at 20:16 

20120420, 11:10  #40 
Just call me Henry
"David"
Sep 2007
Liverpool (GMT/BST)
6232_{10} Posts 
I have attached 5, 6 and 7
7 is back with mod 30 as 5 has been lost and I haven't worked out the numbers for mod 210 yet The tuples we have programs for are: 3: 1 +1 +5 4: 1 +1 +5 +7 5: 1 +1 +5 +7 +11 6: 5 1 +1 +5 +7 +11 7: 1 +1 +5 +7 +11 +17 +19 @axn Do you have a quick way of calculating the values for n_mod? My way so far has been really slow and isn't really suitable for 12. 4 was bad enough. How large tuples do you want PuzzlePeter? 
20120420, 12:39  #41 
"Vincent"
Apr 2010
Over the rainbow
37·79 Posts 
just a minor nitpick : when you sieve for 7tuple the file is named "quinxxx.txt"

20120420, 14:54  #42 
Jun 2009
2^{2}×5^{2}×7 Posts 
I am still trying to understand enough so I can do the modifications myself. There is some success, but I still don't get several things.
1) PreSieve = ... product of all primes <19 minus some of the smaller ones. Multiplying the missing ones seems to give the "step length" which is 30 or 210 in our examples here. But why <19 and not <23, <29 or whichever prime number? 2) Probably the largest question mark: how do you determine the length and the numbers of n_mod? axn posted the numbers for step 210. 12 of them which is 1 more than the +11 used for 6tuples. Is this the way to calculate the length of n_mod? How large should the tuples be? Well, this page http://sites.google.com/site/anthony...cts=1#largest4 lists tuples up to 23 numbers long. I don't understand the "there are no known 24tuples". Why not add the 17 to the 23tuple? However, the longest nontrivial so far is a 19tuple. Wouldn't it be fun to experiment in these ranges? I don't want to ask you to write this. As I said I hope I can get to the point where I am able to to this myself. EDIT: Did I get this right: When I don't modify n_mod and stick to 210 with the numbers axn posted, all I need to do is complete the init_indexes according to the pattern I'm looking for? As I understand it, modifying the step (6, 30, 210,...) together with n_mod is purely a performance thing? Last fiddled with by PuzzlePeter on 20120420 at 15:09 
20120420, 16:26  #43 
Mar 2004
3×127 Posts 
1) Presieve:
(I am not completely sure, if axn uses the presieve for the same purpose, as I do). For me it is not necessary, but it is a way to improve the performance. When you sieve, you remove a candidate from the bitmap, add (for example) 7 remove the next candidate, add 7 and so on. When the prime you sieve is small, it takes a large number of steps to walk through the whole array. That’y why sieving small primes is slow (NewPGen is slow at the beginning). In this case it is easier to create an array of the size 7*11*13*17*19 * 8 (that it into bytes without remainder), sieve these first primes and take then this array as basis for future sieving. A large array (up to 23, 29 etc) is faster, when you sieve a big area, but takes longer to presieve. A combined approach is to take an array of 56 Bits (7 bytes), sieve the prime 7, then concat the resulting array 11 times (77 Bytes). Now you can sieve the prime 11, then concat the resulting array 13 times (1001 Bytes), sieve the prime 13, concat the resulting array 17 times and sieve the prime 17 etc. until you reach the final size. Maybe you want to keep the resulting array in case you want to sieve more than one range, in case one range does not fit into the memory. 2) n_mod: Indeed it is a performance thing (and you can keep the memory usage 15 or 105 times smaller) When you sieve 5tuple, you have for example the form N + d, where d= 1, 1, 5, 7, 11. You can show that N needs the form 0 (mod 2) 0 (mod 3) 2 (mod 5) When you combine them together you get 12 (mod 30). For 4 tuple and 5 tuple you only need to sieve the candidates of the form 12 (mod 30) You can also show that primes need the form 4 or 5 (mod 7). That will result in 12 or 102 (mod 210). So you can either sieve (mod 30) or you generate 2 runs with 12 (mod 210) and 102 (mod 210). That is not faster but 7 times more candidates fit into memory When sieving 6tuple (N + d, where d= 5, 1, 1, 5, 7, 11) then just 4 (mod 7) is remaining. In this case you can sieve mod 210. The next larger mod you get when sieveing 10tuples with mod 2310. 
20120420, 18:27  #44 
"Vincent"
Apr 2010
Over the rainbow
37×79 Posts 
where should i change Sprime to sieve a bit deeper for quad? (right now, quad10011_5_20... 32.3 M k ...at 1.22 B, advancing slooowly 1k every 0.2/0.1 sec)

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
How/Where to get Jens Kruse Andersen's prime constellation sieve?  Stargate38  And now for something completely different  2  20170428 00:08 
Efficiently finding a linear progression in data  fivemack  Math  27  20151212 18:42 
GPU Prime Sieve  tapion64  GPU Computing  7  20140410 06:15 
Sieve depth vs. prime probability  Unregistered  Information & Answers  2  20100525 20:51 
Prime in Riesel Sieve Project  Sloth  Prime Sierpinski Project  1  20060510 02:02 