20201102, 19:28  #12 
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}·227 Posts 
Resurrecting this thread. . .
I'm going to bring this thread back to life to address the ongoing (elves) work for the db.
I referenced in an aliquot thread my current work with small fdb composites and I'd like to move that discussion to this thread. If Chris2be8 is agreeable I may move our relevant posts from there to here later on. Currently I am running a couple Colab instances at 91 dd, but they are underperforming. Evaluating the backlog for even the 7x digit composites, I'm thinking of lowering my work down into that area. I'm using a pretty large random, so my duplication rate will hopefully be minimal. If anyone would like me to move higher and leave some "smaller fruit," don't be shy letting me know. I could easily work at 8x dd or higher, but I'm running ECM with some RPi's and a couple of my Colab sessions; one with YAFU and the other using the GPU branch of GMPECM and Msieve. 
20201103, 19:12  #13 
"Ed Hall"
Dec 2009
Adirondack Mtns
7060_{8} Posts 
Base 162 table should be all "greened up" now.
I've started "touching" all the sequences for the tables and it took a couple hours to do five tables this morning. I have started a script to run all of the tables except 220 and 284, since they're just being initialized and probably won't need any "help." I'm curious how long the script will actually take to get through everything. 
20201104, 13:53  #14 
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}×227 Posts 
I was greeted this morning with the finished script, so every sequence in the current tables and base 72, has been accessed. Hopefully, that will get the update time back near normal.

20201104, 14:22  #15 
"Rich"
Aug 2002
Benicia, California
4B9_{16} Posts 
I have had one core of an i3 running the perl script utilizing yafu for the past 6 months or so. It is set to start at C81 and to choose one of the first 1,000 composites, so I have not had much problem with worker collisions.

20201104, 15:47  #16  
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}×227 Posts 
Quote:
I suppose I will catch up to your size pretty soon. If you do notice collisions, mention it here and I'll hop a little higher. I might do that anyway. . . 

20201104, 16:56  #17 
Sep 2009
2^{2}·3·167 Posts 
@EdH, you are welcome to move my last 2 posts from the aliquot thread here, I was only using it as a place to let off steam about the amount of junk being added to factordb.
I've got one system working from 7079 digits, it grabs the smallest number in that range, factors it and repeats. So if you want to work in that range taking an offset of 10+rand(1000) would make absolutely sure you would not collide with me. I'm also working on 80+ digit numbers that can be factored by SNFS. I'm currently working around 84 digits (I was at 90 digits until recently). These are spaced out enough to make collisions unlikely. And thanks for the help. Chris 
20201104, 18:50  #18  
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}·227 Posts 
Quote:
I'm looking at the feasibility of adding some scripts to my main ecmpi/CADONFS clients, to use them as elves when the CADONFS servers are doing LA. But, I'm not sure if/when I may do that. I have been away from elf work because I got really frustrated by the huge composite dump that happened right after we had cleared out the backlog through 100 (or, maybe it was even 110) digits. I'm a little encouraged ATM, with the actual overall number of composites through 120 showing a decrease instead of still growing. 

20201115, 19:41  #19 
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}×227 Posts 
>40,000 composites added to the <70 queue?
@Chris: Do I remember you helping out the db when it gets this type of flooding? Should I turn a Colab session against them? Or, will this be a small task for the local db elves? I hesitate turning some machines from my "farm" against them because I think I'll hit my db limits. 
20201115, 21:16  #20 
Aug 2020
2^{3} Posts 
I notice that most of the new number is of the form a^n+1 for 10001<=a<=20000 and n somewhere around 20. Most of these numbers already factored at cownoise.com . Is there anyway to just transfered them over?

20201115, 21:31  #21 
"Ed Hall"
Dec 2009
Adirondack Mtns
2^{4}·227 Posts 
I think a script to transfer them would hit the db limits, but one could be written. All it would need to do is submit the composite with its factors via the report routine. But, every one of the new factors would create a new ID which would bump the limit after a short while.

20201116, 16:42  #22 
May 2009
Russia, Moscow
2×3^{3}×47 Posts 
A bunch of new small composites just arrived
I wonder what is the purpose of adding them to FDB  hoping the elves will factor them? 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Is there a tool that picks off small composites constantly?  fivemack  FactorDB  14  20180207 17:00 
Commandline program for factoring small numbers  James Heinrich  Software  22  20110829 16:35 
What's the point of factoring known composites?  ixfd64  PrimeNet  4  20110221 11:51 
A small factoring program  Yamato  Factoring  2  20071121 23:29 
Factoring of composites with near factors  request for data  AntonVrba  Factoring  3  20060205 06:30 