mersenneforum.org  

Go Back   mersenneforum.org > Great Internet Mersenne Prime Search > Hardware > GPU Computing > GpuOwl

Reply
 
Thread Tools
Old 2021-05-27, 06:36   #1
jas
 
"Simon Josefsson"
Jan 2020
Stockholm

2316 Posts
Default Expected temperature? Gpuowl with Radeon VII

What temperature are people seeing? I'm using gpuowl with a Radeon VII, and below is 'sensors' output. I can't really tell if this is good or bad, but >100°C seems high to me. On the other hand, the fan is not running at max speed so maybe it decided this is okay.



Quote:
gigabyte_wmi-virtual-0
Adapter: Virtual device
temp1: +61.0°C
temp2: -55.0°C
temp3: +65.0°C
temp4: +21.0°C
temp5: +59.0°C
temp6: +65.0°C

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0°C (high = +70.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1: +16.8°C (crit = +20.8°C)
temp2: +16.8°C (crit = +20.8°C)

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: N/A

amdgpu-pci-0a00
Adapter: PCI adapter
vddgfx: 1.04 V
fan1: 2698 RPM (min = 0 RPM, max = 3850 RPM)
edge: +78.0°C (crit = +100.0°C, hyst = -273.1°C)
(emerg = +105.0°C)
junction: +105.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
mem: +84.0°C (crit = +94.0°C, hyst = -273.1°C)
(emerg = +99.0°C)
power1: 239.00 W (cap = 250.00 W)
jas is offline   Reply With Quote
Old 2021-05-27, 07:00   #2
LaurV
Romulan Interpreter
 
LaurV's Avatar
 
"name field"
Jun 2011
Thailand

980810 Posts
Default

105°C to 110°C for the hottest junction point is kinda normal for air cooled cards (like XFX, I have two of them) and it is ok if your card produces stable results, and if the other temperatures stay lower (in the lower eighties, max). My cards are "frozen" to 83/111, they take about 190-200 watts each (limited by software, if I don't limit the power, the clock gets crazzy up and down as explained below, and the throughput is lower in average) and they didn't smoke yet. You should not worry as long as the card seems to run stable and the clocks and the power draw don't wary too much. The card has a protection mechanism and will stop for short time or throttle if it gets too hot or if it consumes too much power, and in that case you will see large and fast oscillations in clock, power, etc. If you see that, or get unreliable results, it means your cooling solution can't dissipate the heat and you need to reduce the clock, or limit the power, or increase fan speed (if air, it gets noisy...).
LaurV is offline   Reply With Quote
Old 2021-05-27, 20:14   #3
jas
 
"Simon Josefsson"
Jan 2020
Stockholm

5·7 Posts
Default

Thanks for response! I don't seem to have cooling issues, since nothing is complaining and the machine feels fairly cold. Still, I have now frobbed sclk to lower power consumption from 250W to 180W (with a mere ~10% drop in performance) which probably improves temperature as well.
jas is offline   Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
gpuOwl Windows setup for Radeon VII Prime95 GpuOwl 91 2019-12-30 08:30
AMD Radeon Pro WX 3200 ET_ GPU Computing 1 2019-07-04 11:02
If you were expected to work, but not expected to get a job or pay, what would be good things to do? jasong Lounge 10 2018-06-04 16:39
Radeon Pro Duo 0PolarBearsHere GPU Computing 0 2016-03-15 01:32
CPU temperature different when LL than when TF Schamschi Hardware 3 2009-11-17 20:48

All times are UTC. The time now is 05:41.


Tue Dec 7 05:41:17 UTC 2021 up 137 days, 10 mins, 0 users, load averages: 1.37, 1.47, 1.57

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.