Cant run 7900XTX

yuki0831 · 2022-12-17, 12:01

Hello.
I bought Redeon 7900XTX Powercolor 24G-L/OC(190000yen)

I tried to crunch,but failed.

20221217 20:45:24 GpuOwl VERSION v7.2-129-g2a16a0b
20221217 20:45:24 config: -device 1
20221217 20:45:24 config: -prp 77232917
20221217 20:45:24 config: -maxAlloc 19G
20221217 20:45:24 config:
20221217 20:45:24 config:
20221217 20:45:24 config:
20221217 20:45:24 config:
20221217 20:45:24 device 1, unique id ''
20221217 20:45:24 gfx1100-1 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
20221217 20:45:24 gfx1100-1 77232917 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DAMDGPU=1 -DMM2_CHAIN=1u -DWEIGHT_STEP=0.50132640504118509 -DIWEIGHT_STEP=-0.33392232585653647 -DIWEIGHTS={0,-0.11268106401526803,-0.21266510584292314,-0.30138283945289102,-0.38010376444266458,-0.44995433184432437,-0.023868125978189877,-0.13385970416218501,} -DFWEIGHTS={0,0.12699048723694423,0.27010755832256494,0.43139913599727303,0.61317320970810774,0.81803086160652561,0.024451743266869885,0.1545473692950666,} -cl-std=CL2.0 -cl-finite-math-only "
20221217 20:45:26 gfx1100-1 77232917 OpenCL compilation in 2.24 s
20221217 20:45:26 gfx1100-1 77232917 PRP starting from beginning
20221217 20:45:27 gfx1100-1 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003
20221217 20:45:27 gfx1100-1 77232917 PRP starting from beginning
20221217 20:45:27 gfx1100-1 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003
20221217 20:45:27 gfx1100-1 Exiting because "error on load"
20221217 20:45:27 gfx1100-1 Bye

How can I? Its first time to
buy AMD Radeon GPU.

kriesel · 2022-12-17, 12:26

How many GPUs are in the system? Have you verified the 7900XTx is the second?
Run Gpuowl or gpuowl-win -h and check the device list it produces between the - options list and the fft lengths list.
OpenCL devices as recognized by Gpuowl versions start at -device 0.

moebius · 2022-12-17, 12:47

Did you try v 6.11

gpuOwl 6.11.364 windows binary

gpuOwl 6.11.380 linux binary (Ubuntu)

try to lower the RAM frequenzy f.e. 200 Mhz

yuki0831 · 2022-12-17, 12:52

20221217 21:43:04 GpuOwl VERSION v7.2-129-g2a16a0b
20221217 21:43:04 config: -device 0
20221217 21:43:04 config: -prp 77232917
20221217 21:43:04 config: -maxAlloc 19G
20221217 21:43:04 config: -mprimeDir mprime
20221217 21:43:04 config:
20221217 21:43:04 config:
20221217 21:43:04 config:
20221217 21:43:04 config:
20221217 21:43:04 device 0, unique id ''
20221217 21:43:07 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
20221217 21:43:07 gfx1100-0 77232917 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DAMDGPU=1 -DMM2_CHAIN=1u -DWEIGHT_STEP=0.50132640504118509 -DIWEIGHT_STEP=-0.33392232585653647 -DIWEIGHTS={0,-0.11268106401526803,-0.21266510584292314,-0.30138283945289102,-0.38010376444266458,-0.44995433184432437,-0.023868125978189877,-0.13385970416218501,} -DFWEIGHTS={0,0.12699048723694423,0.27010755832256494,0.43139913599727303,0.61317320970810774,0.81803086160652561,0.024451743266869885,0.1545473692950666,} -cl-std=CL2.0 -cl-finite-math-only "
20221217 21:43:10 gfx1100-0 77232917 OpenCL compilation in 3.24 s
20221217 21:43:10 gfx1100-0 77232917 PRP starting from beginning
20221217 21:43:11 gfx1100-0 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003
20221217 21:43:11 gfx1100-0 77232917 PRP starting from beginning
20221217 21:43:11 gfx1100-0 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003
20221217 21:43:11 gfx1100-0 Exiting because "error on load"
20221217 21:43:11 gfx1100-0 Bye

After your post I chnaged my system. It didnt solve issue.

XTX first. No other GPU connct.
now
XTX device number 0
No GPU conncect

previous
RTX4090 first device number 0
XTX device number 1

yuki0831 · 2022-12-17, 12:57

2022-12-17 21:55:36 config: -device 0
2022-12-17 21:55:36 config: -prp 77232917
2022-12-17 21:55:36 config: -maxAlloc 19000MB
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 device 0, unique id ''
2022-12-17 21:55:36 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
2022-12-17 21:55:36 gfx1100-0 Expected maximum carry32: 4E8A0000
2022-12-17 21:55:36 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only "
2022-12-17 21:55:39 gfx1100-0 OpenCL compilation in 2.59 s
2022-12-17 21:55:39 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003)
2022-12-17 21:55:39 gfx1100-0 Exiting because "error on load"
2022-12-17 21:55:39 gfx1100-0 Bye

Also older version wont work

moebius · 2022-12-17, 13:06

Quote:

Originally Posted by yuki0831

2022-12-17 21:55:36 config: -device 0
2022-12-17 21:55:36 config: -prp 77232917
2022-12-17 21:55:36 config: -maxAlloc 19000MB
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 config:
2022-12-17 21:55:36 device 0, unique id ''
2022-12-17 21:55:36 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
2022-12-17 21:55:36 gfx1100-0 Expected maximum carry32: 4E8A0000
2022-12-17 21:55:36 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only "
2022-12-17 21:55:39 gfx1100-0 OpenCL compilation in 2.59 s
2022-12-17 21:55:39 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003)
2022-12-17 21:55:39 gfx1100-0 Exiting because "error on load"
2022-12-17 21:55:39 gfx1100-0 Bye

Also older version wont work

Value for maxalloc must be in MB (Exception gpu_bad_alloc: Reached GPU maxAlloc limit 19 MB)

-maxAlloc 19532

and please post a benchmark of gpuowl -iters 20000 -prp 77936867 in this thread , if you can get it to work.

yuki0831 · 2022-12-17, 13:10

2022-12-17 22:08:43 config: -device 0
2022-12-17 22:08:43 config: -prp 77232917 -maxAlloc 19532
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 device 0, unique id ''
2022-12-17 22:08:43 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
2022-12-17 22:08:43 gfx1100-0 Expected maximum carry32: 4E8A0000
2022-12-17 22:08:43 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only "
2022-12-17 22:08:46 gfx1100-0 OpenCL compilation in 2.56 s
2022-12-17 22:08:46 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003)
2022-12-17 22:08:46 gfx1100-0 Exiting because "error on load"
2022-12-17 22:08:46 gfx1100-0 Bye

changes max allocation. also didint run.

moebius · 2022-12-17, 13:20

Eventually it is the same problem how it was with the RTX4090. Try to lower VRAM and gpuclock a bit.

kriesel · 2022-12-17, 13:31

Try running mfakto on it. And its OpenCL test option.
Try running clinfo or other third-party utilities to check whether OpenCL is working correctly on that GPU.
Also check the system side, not only the GPU side, for overclocking & reliability.

yuki0831 · 2022-12-17, 13:42

2022-12-17 22:08:43 config: -device 0
2022-12-17 22:08:43 config: -prp 77232917 -maxAlloc 19532
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 config:
2022-12-17 22:08:43 device 0, unique id ''
2022-12-17 22:08:43 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw)
2022-12-17 22:08:43 gfx1100-0 Expected maximum carry32: 4E8A0000
2022-12-17 22:08:43 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only "
2022-12-17 22:08:46 gfx1100-0 OpenCL compilation in 2.56 s
2022-12-17 22:08:46 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003)
2022-12-17 22:08:46 gfx1100-0 Exiting because "error on load"
2022-12-17 22:08:46 gfx1100-0 Bye

mfakto works well.

RTX4090 its Powerlimt 75% TF over 1000M works well(24/7). System side is still good.
I dont OC runs 24/7.
run on Windows 10

Linux software dont work. And commnd option? i dont know about software config nor compile.

yuki0831 · 2022-12-17, 13:49

Powercolor dont launch OC tool. So,I Downloaded Msi afterburner.
lower Core clock and PL didnt solve this issue.
MSI afterbuner dont set lower MEM clock.

RC5-72 (distributed.net) OpenCL software works well.
I wait for GPU-Z update. it didnt load MEM colck, power comsumption.

2022-12-17, 12:01	#1
yuki0831 "Yuki@karoushi" Feb 2020 Japan, Chiba pref 2×3×5 Posts	Cant run 7900XTX Hello. I bought Redeon 7900XTX Powercolor 24G-L/OC(190000yen) I tried to crunch,but failed. 20221217 20:45:24 GpuOwl VERSION v7.2-129-g2a16a0b 20221217 20:45:24 config: -device 1 20221217 20:45:24 config: -prp 77232917 20221217 20:45:24 config: -maxAlloc 19G 20221217 20:45:24 config: 20221217 20:45:24 config: 20221217 20:45:24 config: 20221217 20:45:24 config: 20221217 20:45:24 device 1, unique id '' 20221217 20:45:24 gfx1100-1 77232917 FFT: 4M 1K:8:256 (18.41 bpw) 20221217 20:45:24 gfx1100-1 77232917 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DAMDGPU=1 -DMM2_CHAIN=1u -DWEIGHT_STEP=0.50132640504118509 -DIWEIGHT_STEP=-0.33392232585653647 -DIWEIGHTS={0,-0.11268106401526803,-0.21266510584292314,-0.30138283945289102,-0.38010376444266458,-0.44995433184432437,-0.023868125978189877,-0.13385970416218501,} -DFWEIGHTS={0,0.12699048723694423,0.27010755832256494,0.43139913599727303,0.61317320970810774,0.81803086160652561,0.024451743266869885,0.1545473692950666,} -cl-std=CL2.0 -cl-finite-math-only " 20221217 20:45:26 gfx1100-1 77232917 OpenCL compilation in 2.24 s 20221217 20:45:26 gfx1100-1 77232917 PRP starting from beginning 20221217 20:45:27 gfx1100-1 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003 20221217 20:45:27 gfx1100-1 77232917 PRP starting from beginning 20221217 20:45:27 gfx1100-1 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003 20221217 20:45:27 gfx1100-1 Exiting because "error on load" 20221217 20:45:27 gfx1100-1 Bye How can I? Its first time to buy AMD Radeon GPU.

2022-12-17, 12:26	#2
kriesel "TF79LL86GIMPS96gpu17" Mar 2017 US midwest 1111010001111₂ Posts	How many GPUs are in the system? Have you verified the 7900XTx is the second? Run Gpuowl or gpuowl-win -h and check the device list it produces between the - options list and the fft lengths list. OpenCL devices as recognized by Gpuowl versions start at -device 0. Last fiddled with by kriesel on 2022-12-17 at 12:27

2022-12-17, 13:31	#9
kriesel "TF79LL86GIMPS96gpu17" Mar 2017 US midwest 7,823 Posts	Try running mfakto on it. And its OpenCL test option. Try running clinfo or other third-party utilities to check whether OpenCL is working correctly on that GPU. Also check the system side, not only the GPU side, for overclocking & reliability. Last fiddled with by kriesel on 2022-12-17 at 13:32

2022-12-17, 13:49	#11
yuki0831 "Yuki@karoushi" Feb 2020 Japan, Chiba pref 30₁₀ Posts	Powercolor dont launch OC tool. So,I Downloaded Msi afterburner. lower Core clock and PL didnt solve this issue. MSI afterbuner dont set lower MEM clock. RC5-72 (distributed.net) OpenCL software works well. I wait for GPU-Z update. it didnt load MEM colck, power comsumption. Attached Thumbnails

2022-12-17, 12:47	#3
moebius Jul 2009 Germany 2×353 Posts	Did you try v 6.11 gpuOwl 6.11.364 windows binary gpuOwl 6.11.380 linux binary (Ubuntu) try to lower the RAM frequenzy f.e. 200 Mhz

2022-12-17, 12:52	#4
yuki0831 "Yuki@karoushi" Feb 2020 Japan, Chiba pref 2·3·5 Posts	20221217 21:43:04 GpuOwl VERSION v7.2-129-g2a16a0b 20221217 21:43:04 config: -device 0 20221217 21:43:04 config: -prp 77232917 20221217 21:43:04 config: -maxAlloc 19G 20221217 21:43:04 config: -mprimeDir mprime 20221217 21:43:04 config: 20221217 21:43:04 config: 20221217 21:43:04 config: 20221217 21:43:04 config: 20221217 21:43:04 device 0, unique id '' 20221217 21:43:07 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw) 20221217 21:43:07 gfx1100-0 77232917 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DAMDGPU=1 -DMM2_CHAIN=1u -DWEIGHT_STEP=0.50132640504118509 -DIWEIGHT_STEP=-0.33392232585653647 -DIWEIGHTS={0,-0.11268106401526803,-0.21266510584292314,-0.30138283945289102,-0.38010376444266458,-0.44995433184432437,-0.023868125978189877,-0.13385970416218501,} -DFWEIGHTS={0,0.12699048723694423,0.27010755832256494,0.43139913599727303,0.61317320970810774,0.81803086160652561,0.024451743266869885,0.1545473692950666,} -cl-std=CL2.0 -cl-finite-math-only " 20221217 21:43:10 gfx1100-0 77232917 OpenCL compilation in 3.24 s 20221217 21:43:10 gfx1100-0 77232917 PRP starting from beginning 20221217 21:43:11 gfx1100-0 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003 20221217 21:43:11 gfx1100-0 77232917 PRP starting from beginning 20221217 21:43:11 gfx1100-0 77232917 EE 0 on-load: 0000000000000000 vs. 0000000000000003 20221217 21:43:11 gfx1100-0 Exiting because "error on load" 20221217 21:43:11 gfx1100-0 Bye After your post I chnaged my system. It didnt solve issue. XTX first. No other GPU connct. now XTX device number 0 No GPU conncect previous RTX4090 first device number 0 XTX device number 1

2022-12-17, 13:10	#7
yuki0831 "Yuki@karoushi" Feb 2020 Japan, Chiba pref 2·3·5 Posts	2022-12-17 22:08:43 config: -device 0 2022-12-17 22:08:43 config: -prp 77232917 -maxAlloc 19532 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 device 0, unique id '' 2022-12-17 22:08:43 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw) 2022-12-17 22:08:43 gfx1100-0 Expected maximum carry32: 4E8A0000 2022-12-17 22:08:43 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only " 2022-12-17 22:08:46 gfx1100-0 OpenCL compilation in 2.56 s 2022-12-17 22:08:46 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003) 2022-12-17 22:08:46 gfx1100-0 Exiting because "error on load" 2022-12-17 22:08:46 gfx1100-0 Bye changes max allocation. also didint run.

2022-12-17, 13:20	#8
moebius Jul 2009 Germany 2C2₁₆ Posts	Eventually it is the same problem how it was with the RTX4090. Try to lower VRAM and gpuclock a bit.

2022-12-17, 13:42	#10
yuki0831 "Yuki@karoushi" Feb 2020 Japan, Chiba pref 2·3·5 Posts	2022-12-17 22:08:43 config: -device 0 2022-12-17 22:08:43 config: -prp 77232917 -maxAlloc 19532 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 config: 2022-12-17 22:08:43 device 0, unique id '' 2022-12-17 22:08:43 gfx1100-0 77232917 FFT: 4M 1K:8:256 (18.41 bpw) 2022-12-17 22:08:43 gfx1100-0 Expected maximum carry32: 4E8A0000 2022-12-17 22:08:43 gfx1100-0 OpenCL args "-DEXP=77232917u -DWIDTH=1024u -DSMALL_HEIGHT=256u -DMIDDLE=8u -DPM1=0 -DAMDGPU=1 -DMM2_CHAIN=1u -DMAX_ACCURACY=1 -DWEIGHT_STEP_MINUS_1=0x8.056ed6245ec78p-4 -DIWEIGHT_STEP_MINUS_1=-0xa.af7ddf9ea896p-5 -cl-unsafe-math-optimizations -cl-std=CL2.0 -cl-finite-math-only " 2022-12-17 22:08:46 gfx1100-0 OpenCL compilation in 2.56 s 2022-12-17 22:08:46 gfx1100-0 77232917 EE 0 loaded: blockSize 400, 0000000000000000 (expected 0000000000000003) 2022-12-17 22:08:46 gfx1100-0 Exiting because "error on load" 2022-12-17 22:08:46 gfx1100-0 Bye mfakto works well. RTX4090 its Powerlimt 75% TF over 1000M works well(24/7). System side is still good. I dont OC runs 24/7. run on Windows 10 Linux software dont work. And commnd option? i dont know about software config nor compile.