Data Centre Energy Consumption Optimisation - Page 2

jasong · 2017-05-18, 06:46

Most of this is over my head, but...

I had a friend who used a water mister on his air conditioner that only operated when the machine was pulling in air. The water was just regular faucet water which came from underground pipes. Because of the coldness of the water and the expansion from the misting, the temperature of the air was decreased by about 10 degrees(Fahrenheit, unfortunately) in the hot summer days, which frequently get into the 90s(again Fahrenheit).

Misters use very little power, most of the expense is in the maintenance and installation.

chalsall · 2017-05-18, 16:05

Quote:

Originally Posted by jasong

The water was just regular faucet water which came from underground pipes. Because of the coldness of the water and the expansion from the misting, the temperature of the air was decreased by about 10 degrees(Fahrenheit, unfortunately) in the hot summer days, which frequently get into the 90s(again Fahrenheit).

This only works where the ambient humidity is already low.

Otherwise the AC unit spends slightly more energy removing the water from the air before introducing it to the humans and/or the machines.

Interestingly, humans' perception of temperature is a function of humidity (because they sweat). And machines don't like moisture for obvious reasons.

Mark Rose · 2017-05-18, 17:24

Quote:

Originally Posted by chalsall

Interestingly, humans' perception of temperature is a function of humidity (because they sweat).

Surprisingly so. I find 30° and 70% humidity miserable. But 90° and 15% humidity in a sauna is pleasant.

pinhodecarlos · 2017-06-21, 18:24

Recommended efficient conservative measures were: replace the UPS systems to more efficient ones, current have more than 15 years, and add EC fans to the cooling fans.

pinhodecarlos · 2019-03-15, 14:19

Another bit I’ve managed to achieve was to create an M&V report where the data centre cooling avoided energy is guaranteed. Baseline model for cooling in function of two independent variables (cooling degree days, IT load) with precision of 10% with a level of confidence of 95%. Fun stuff!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CRT optimisation?	mickfrancis	Math	9	2016-03-30 10:20
An opportunity for search engine optimisation	fivemack	Aliquot Sequences	6	2015-11-17 20:31
power consumption	esakertt	Hardware	1	2012-10-09 20:19
Basic optimisation question	fivemack	Puzzles	6	2008-04-08 13:50
HT and all kind of other optimisation thread	hhh	Prime Sierpinski Project	2	2006-04-06 09:33

2017-05-18, 06:46	#12
jasong "Jason Goatcher" Mar 2005 DB3₁₆ Posts	Most of this is over my head, but... I had a friend who used a water mister on his air conditioner that only operated when the machine was pulling in air. The water was just regular faucet water which came from underground pipes. Because of the coldness of the water and the expansion from the misting, the temperature of the air was decreased by about 10 degrees(Fahrenheit, unfortunately) in the hot summer days, which frequently get into the 90s(again Fahrenheit). Misters use very little power, most of the expense is in the maintenance and installation.

2017-06-21, 18:24	#15
pinhodecarlos "Carlos Pinho" Oct 2011 Milton Keynes, UK 3·17·97 Posts	Recommended efficient conservative measures were: replace the UPS systems to more efficient ones, current have more than 15 years, and add EC fans to the cooling fans.

2019-03-15, 14:19	#16
pinhodecarlos "Carlos Pinho" Oct 2011 Milton Keynes, UK 3×17×97 Posts	Another bit I’ve managed to achieve was to create an M&V report where the data centre cooling avoided energy is guaranteed. Baseline model for cooling in function of two independent variables (cooling degree days, IT load) with precision of 10% with a level of confidence of 95%. Fun stuff!