PRPnet Servers for CRUS - Page 6

MisterBitcoin · 2017-03-21, 18:43

Quote:

Originally Posted by rebirther

Yes, the server is down and I need some files for the test on weekend. I hope all is online tomorrow?

If not:
I have sieve files for S393 (35-100K) and S742 (25-100K). These should keep BOINC a few days busy. :)
If you need them, request them via Mail. (see PM)

masser · 2017-03-21, 18:57

Ditto. I have files for RS243, too. PM me if you need anything.

rebirther · 2017-03-21, 19:24

Quote:

Originally Posted by masser

Ditto. I have files for RS243, too. PM me if you need anything.

I could need 2 ranges from 100-200k, perhaps 100-300k and 2 bases R/S from 25-100k with around 500k factors inside.

MisterBitcoin · 2017-03-21, 19:40

Quote:

Originally Posted by rebirther

I could need 2 ranges from 100-200k, perhaps 100-300k and 2 bases R/S from 25-100k with around 500k factors inside.

S393 has ~500K tests from n=35-100K
S742 has 462K tests from n=25-100K

MyDogBuster · 2017-03-21, 21:29

Seems servers back up, grab what you need.

gd_barnes · 2017-03-21, 22:20

Servers back up. See nastiness at http://mersenneforum.org/showpost.ph...&postcount=486.

MyDogBuster · 2017-03-21, 23:38

Quote:

I feel very fortunate.

Nasty stuff. Glad all's okay.

gd_barnes · 2017-05-15, 21:18

I have been sieving the Riesel base 2/4 even/odd k's file for n=5M-16.777M slowly for several months now. I have reached P=1040T (1.04P). I will load n=5M-7M into port 1400 when I reach P=1100T (1.1P). It should be done in about 6 weeks.

mdettweiler · 2017-05-16, 17:14

Quote:

Originally Posted by gd_barnes

I have been sieving the Riesel base 2/4 even/odd k's file for n=5M-16.777M slowly for several months now. I have reached P=1040T (1.04P). I will load n=5M-7M into port 1400 when I reach P=1100T (1.1P). It should be done in about 6 weeks.

Ah, perfect - that's roughly in line with my estimate for when port 1400 will hit 5M at current processing rates. Should be little (if any) downtime.

(Though of course there is always port 1300 to keep people busy if 1400 is empty for a bit.)

pinhodecarlos · 2017-05-16, 21:18

My client seems not able to upload the results. I'm using prpclient-5.3.0-windows with the latest cllr version.

Code:

[2017-05-16 20:07:14 GDT] CRUS1400: 14361*2^4906590-1 is not prime.  Residue 4D46A1106E4FE654
[2017-05-16 22:13:16 GDT] CRUS1400: 101746*2^4906624+1 is not prime.  Residue B238AFF5120A496E
[2017-05-16 22:13:16 GDT] Total Time:  3:40:32  Total Work Units: 2  Special Results Found: 0
[2017-05-16 22:13:17 GDT] CRUS1400: Returning work to server noprimeleftbehind.net at port 1400
[2017-05-16 22:13:17 GDT] CRUS1400: ERROR:  Test for 14361*2^4906590-1 was rejected.  The server could not parse the message

Code:

[2017-05-16 20:07:14 GDT] Server: CRUS1400, Candidate: 14361*2^4906590-1  Program: start.bat  Residue: 4D46A1106E4FE654  Time: 5670 seconds
[2017-05-16 22:13:16 GDT] Server: CRUS1400, Candidate: 101746*2^4906624+1  Program: start.bat  Residue: B238AFF5120A496E  Time: 7562 seconds

rogue · 2017-05-16, 22:37

Quote:

Originally Posted by pinhodecarlos

My client seems not able to upload the results. I'm using prpclient-5.3.0-windows with the latest cllr version.

Code:

[2017-05-16 20:07:14 GDT] CRUS1400: 14361*2^4906590-1 is not prime.  Residue 4D46A1106E4FE654
[2017-05-16 22:13:16 GDT] CRUS1400: 101746*2^4906624+1 is not prime.  Residue B238AFF5120A496E
[2017-05-16 22:13:16 GDT] Total Time:  3:40:32  Total Work Units: 2  Special Results Found: 0
[2017-05-16 22:13:17 GDT] CRUS1400: Returning work to server noprimeleftbehind.net at port 1400
[2017-05-16 22:13:17 GDT] CRUS1400: ERROR:  Test for 14361*2^4906590-1 was rejected.  The server could not parse the message

Code:

[2017-05-16 20:07:14 GDT] Server: CRUS1400, Candidate: 14361*2^4906590-1  Program: start.bat  Residue: 4D46A1106E4FE654  Time: 5670 seconds
[2017-05-16 22:13:16 GDT] Server: CRUS1400, Candidate: 101746*2^4906624+1  Program: start.bat  Residue: B238AFF5120A496E  Time: 7562 seconds

Please upgrade your client. This was a fix from 5.3.1:

Fix issue where last character of LLR residue was truncated before it was reported.

2017-03-21, 22:20	#61
gd_barnes May 2007 Kansas; USA 101×103 Posts	Servers back up. See nastiness at http://mersenneforum.org/showpost.ph...&postcount=486. Last fiddled with by gd_barnes on 2017-03-21 at 22:20

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRPnet servers for NPLB	mdettweiler	No Prime Left Behind	228	2018-12-26 04:50
Public PRPNet Servers	rogue	Open Projects	26	2013-01-16 01:33
SR5 PRPnet 2.4.7 Servers - Shutting Down	Joe O	Sierpinski/Riesel Base 5	6	2010-12-06 20:41
PRPNet servers down?	opyrt	Prime Sierpinski Project	13	2009-11-04 21:33
LLRnet servers for CRUS	gd_barnes	Conjectures 'R Us	39	2008-07-15 10:26

2017-03-21, 18:57	#57
masser Jul 2003 wear a mask 2²×3×139 Posts	Ditto. I have files for RS243, too. PM me if you need anything.

2017-03-21, 21:29	#60
MyDogBuster May 2008 Wilmington, DE 2²·23·31 Posts	Seems servers back up, grab what you need.

2017-05-15, 21:18	#63
gd_barnes May 2007 Kansas; USA 10403₁₀ Posts	I have been sieving the Riesel base 2/4 even/odd k's file for n=5M-16.777M slowly for several months now. I have reached P=1040T (1.04P). I will load n=5M-7M into port 1400 when I reach P=1100T (1.1P). It should be done in about 6 weeks.