The P-1 factoring CUDA program - Page 43

nucleon · 2014-09-07, 23:42

I'm happy.

Everything working aok now :)

ugonabuj · 2014-09-08, 17:29

The primenet server is still kicking my head (repetedly).
Now when I report a factor for a P-1 assigned exponent the bastard answer:

processing: P-1 factor 6272775095469249097847 for M3406181 (B1=1,000,000, B2=20,000,000, E=12)
Result type inappropriate for the assignment type. Processing result but not deleting assignment.
CPU credit is 0.3099 GHz-days.

If I don't have the aid for that exponent anymore I can't unreserve it, it
don't shows in my account assignment but it is counted.

HBendtz

houding · 2014-09-08, 19:18

This has happened to me 5 times in the past. And it happens when I found a factor using cudapm1.

In my assignment list, there is no P-1 listed.

But on my summary page I have 5 P-1 listed under workload.

As I have factored those 5 exponents, I'm not to worried. Even though the avg days is almost 100 now.

James Heinrich · 2014-09-08, 19:25

PrimeNet tries hard to give credit to the right user. Checking the exponent history for M3406181 you can see that the P-1 factor was indeed credited to "HBendtz".

I just had another look at the code, and the "result type inappropriate" message should not have been shown in your case (it was being incorrectly shown for P-1 and ECM factors). I have fixed that now.

If the exponent was assigned to you, it would show up under My Account > Assignments when logged in and you could unreserve or check on the status of the assignment. If it's not there, then it's not assigned to you.

James Heinrich · 2014-09-08, 19:26

Quote:

Originally Posted by houding

In my assignment list, there is no P-1 listed.
But on my summary page I have 5 P-1 listed under workload.

Could you please tell me these exponents so I can investigate what's happening, please?

houding · 2014-09-08, 19:47

Quote:

Originally Posted by James Heinrich

Could you please tell me these exponents so I can investigate what's happening, please?

I had to go digging through my results page. Luckily all of these were manual testing.

66402887
71020303
69804067
69454157
69453871

As you will see in exponent status, when I submitted the factor, on the same day/moment is says expired as well.

Just in case things look fishy - my forum name is houding, my primenet name is AdolfNor.

James Heinrich · 2014-09-08, 19:56

At quick glance things seems as they should be, but perhaps I'm not looking in the right section.
Can you please PM or email me a screenshot of where you see these exponents showing up on your list?

ugonabuj · 2014-09-08, 20:00

No James it is not shown in My Account > Assignments but it is counted for
in the number of total assignment for me.
When I look in "Manual Testing > Extensions" it is shown. But that does not
help there I only can extend the time.

HBendtz

chalsall · 2014-09-08, 21:24

Quote:

Originally Posted by ugonabuj

No James it is not shown in My Account > Assignments but it is counted for
in the number of total assignment for me.
When I look in "Manual Testing > Extensions" it is shown. But that does not
help there I only can extend the time.

HBendtz

If I may please just spend a little bit of hard earned experience to speak some reasonable advice...

Some mean to be serious. But some others just want to seriously take the piss to cause a problem for those who actually think.

Welcome to realitity....

Prime95 · 2014-09-08, 21:36

Quote:

Originally Posted by James Heinrich

At quick glance things seems as they should be, but perhaps I'm not looking in the right section.
Can you please PM or email me a screenshot of where you see these exponents showing up on your list?

James: It looks like $done is properly set to TRUE. I'm guessing the global $t_assigned is not set properly for manual_post_processing to delete the assignment row.

James Heinrich · 2014-09-08, 21:39

Quote:

Originally Posted by chalsall

Welcome to realitity....

I'm not sure I quite follow what your above statement was supposed to mean.
But houding and ugonabuj have indeed pointed out an actual inconsistency in what's displayed in the assignments page. I've got George looking into it. It may just be a display issue or it may involve something deeper in relation to submitting PM1-factor results after an assignment expires.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mfaktc: a CUDA program for Mersenne prefactoring	TheJudger	GPU Computing	3497	2021-06-05 12:27
World's second-dumbest CUDA program	fivemack	Programming	112	2015-02-12 22:51
World's dumbest CUDA program?	xilman	Programming	1	2009-11-16 10:26
Factoring program need help	Citrix	Lone Mersenne Hunters	8	2005-09-16 02:31
Factoring program	ET_	Programming	3	2003-11-25 02:57

2014-09-07, 23:42	#463
nucleon Mar 2003 Melbourne 1003₈ Posts	I'm happy. Everything working aok now :)

2014-09-08, 17:29	#464
ugonabuj Dec 2012 Stockholm, Sweden 5₁₀ Posts	The primenet server is still kicking my head (repetedly). Now when I report a factor for a P-1 assigned exponent the bastard answer: processing: P-1 factor 6272775095469249097847 for M3406181 (B1=1,000,000, B2=20,000,000, E=12) Result type inappropriate for the assignment type. Processing result but not deleting assignment. CPU credit is 0.3099 GHz-days. If I don't have the aid for that exponent anymore I can't unreserve it, it don't shows in my account assignment but it is counted. HBendtz

2014-09-08, 19:18	#465
houding "Adolf" Nov 2013 South Africa 61₁₀ Posts	This has happened to me 5 times in the past. And it happens when I found a factor using cudapm1. In my assignment list, there is no P-1 listed. But on my summary page I have 5 P-1 listed under workload. As I have factored those 5 exponents, I'm not to worried. Even though the avg days is almost 100 now.

2014-09-08, 19:25	#466
James Heinrich "James Heinrich" May 2004 ex-Northern Ontario 6535₈ Posts	PrimeNet tries hard to give credit to the right user. Checking the exponent history for M3406181 you can see that the P-1 factor was indeed credited to "HBendtz". I just had another look at the code, and the "result type inappropriate" message should not have been shown in your case (it was being incorrectly shown for P-1 and ECM factors). I have fixed that now. If the exponent was assigned to you, it would show up under My Account > Assignments when logged in and you could unreserve or check on the status of the assignment. If it's not there, then it's not assigned to you.

2014-09-08, 19:56	#469
James Heinrich "James Heinrich" May 2004 ex-Northern Ontario 11×311 Posts	At quick glance things seems as they should be, but perhaps I'm not looking in the right section. Can you please PM or email me a screenshot of where you see these exponents showing up on your list?

2014-09-08, 20:00	#470
ugonabuj Dec 2012 Stockholm, Sweden 5 Posts	No James it is not shown in My Account > Assignments but it is counted for in the number of total assignment for me. When I look in "Manual Testing > Extensions" it is shown. But that does not help there I only can extend the time. HBendtz