LL with OpenCL - Page 25

kracker · 2013-10-21, 14:43

First of all, the 7990. That is stock speeds, with 1500 MHz.

Also, I got the 7970 (3.7 ms) from TeknoHog, and I believe it is stock(or almost stock) because the 7970 is roughly ~15% faster than a single core of the 7990.

Let me test the speed of the 13.1 drivers later...

Manpowre · 2013-10-21, 20:20

It would be interesting if you could run FFT test from 3-5m FFT size with 1024 between each fft size ?
that way we can sort the list and see which ones are the fastest and also compare the fft sizes to titan and 590s.

Manpowre · 2013-10-24, 07:49

R9 290X runs double precision at 1/8 speed of single precision.

http://www.hardwarecanucks.com/forum...gb-review.html

kracker · 2013-10-24, 15:30

Well well, finally it is out.

http://anandtech.com/show/7457/the-r...r9-290x-review
http://www.tomshardware.com/reviews/...view,3650.html

It looks quite powerful, tying or beating the Titan in most gaming benchmarks in high res, but compute is what really matters, I suppose. I think it will run mfakto well, not sure about clLucas.

Jayder · 2013-10-24, 23:35

There have been 290X (and even 290) "benchmarks" on mersenne.ca for a few weeks now. Where did they come from, and are they legit? For one thing, the prices listed for them are wrong.

kracker · 2013-10-25, 00:21

Quote:

Originally Posted by Jayder

There have been 290X (and even 290) "benchmarks" on mersenne.ca for a few weeks now. Where did they come from, and are they legit? For one thing, the prices listed for them are wrong.

Don't ask me

I'm curious to that as well.

Manpowre · 2013-10-25, 07:19

Quote:

Originally Posted by kracker

Don't ask me

I'm curious to that as well.

I saw it too! was weird.. since those postings need several reports to get out there.

Bdot · 2013-10-30, 20:34

Quote:

Originally Posted by Jayder

There have been 290X (and even 290) "benchmarks" on mersenne.ca for a few weeks now. Where did they come from, and are they legit? For one thing, the prices listed for them are wrong.

As the new cards are GCN as well, the new card's GFlops were used to calculate their GHz-days/day. If AMD really did some improvements to the architecture, then the cards may come out even better.

On the other hand, 280X, 290 and 290X all have a TDP of 250W - how likely is that? Is it aggressive binning or will the higher cards get to their TDP at 800 MHz while the others have room for the boost clock? The answer to that, and how much the 25% of potential boost clock really can do, will have to wait until someone buys one of these monsters.

kracker · 2013-10-30, 21:10

Yes, all cards up to 290 are rebadged.

Anyways, the 7970 GHz has 4.3 TFlops, the 290X supposedly has 5.0 TFlops...

Bdot · 2013-10-30, 22:19

Quote:

Originally Posted by kracker

Yes, all cards up to 290 are rebadged.

Anyways, the 7970 GHz has 4.3 TFlops, the 290X supposedly has 5.0 TFlops...

Yes, at boost clock. But it seems that the stock cooler can't keep the boost for GPGPU tasks. If you manage to absorb 300W, then you should see 600 GHz-days/day.

kracker · 2013-10-30, 23:00

Quote:

Originally Posted by Bdot

Yes, at boost clock. But it seems that the stock cooler can't keep the boost for GPGPU tasks. If you manage to absorb 300W, then you should see 600 GHz-days/day.

Ahh, I see. So I guess we will have to wait for non-stock cooled 290X's...

2013-10-24, 15:30	#268
kracker "Mr. Meeseeks" Jan 2012 California, USA 2³×271 Posts	Well well, finally it is out. http://anandtech.com/show/7457/the-r...r9-290x-review http://www.tomshardware.com/reviews/...view,3650.html It looks quite powerful, tying or beating the Titan in most gaming benchmarks in high res, but compute is what really matters, I suppose. I think it will run mfakto well, not sure about clLucas. Last fiddled with by kracker on 2013-10-24 at 15:31

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mfakto: an OpenCL program for Mersenne prefactoring	Bdot	GPU Computing	1676	2021-06-30 21:23
Can't get OpenCL to work on HD7950 Ubuntu 14.04.5 LTS	VictordeHolland	Linux	4	2018-04-11 13:44
OpenCL accellerated lattice siever	pstach	Factoring	1	2014-05-23 01:03
OpenCL for FPGAs	TObject	GPU Computing	2	2013-10-12 21:09
AMD's Graphics Core Next- a reason to accelerate towards OpenCL?	Belteshazzar	GPU Computing	19	2012-03-07 18:58

2013-10-21, 14:43	#265
kracker "Mr. Meeseeks" Jan 2012 California, USA 4170₈ Posts	First of all, the 7990. That is stock speeds, with 1500 MHz. Also, I got the 7970 (3.7 ms) from TeknoHog, and I believe it is stock(or almost stock) because the 7970 is roughly ~15% faster than a single core of the 7990. Let me test the speed of the 13.1 drivers later...

2013-10-21, 20:20	#266
Manpowre "Svein Johansen" May 2013 Norway 311₈ Posts	It would be interesting if you could run FFT test from 3-5m FFT size with 1024 between each fft size ? that way we can sort the list and see which ones are the fastest and also compare the fft sizes to titan and 590s.

2013-10-24, 07:49	#267
Manpowre "Svein Johansen" May 2013 Norway 3·67 Posts	R9 290X runs double precision at 1/8 speed of single precision. http://www.hardwarecanucks.com/forum...gb-review.html

2013-10-24, 23:35	#269
Jayder Dec 2012 2×139 Posts	There have been 290X (and even 290) "benchmarks" on mersenne.ca for a few weeks now. Where did they come from, and are they legit? For one thing, the prices listed for them are wrong.

2013-10-30, 21:10	#273
kracker "Mr. Meeseeks" Jan 2012 California, USA 2³·271 Posts	Yes, all cards up to 290 are rebadged. Anyways, the 7970 GHz has 4.3 TFlops, the 290X supposedly has 5.0 TFlops...