Can a RAM-less computer run?

jasong · 2012-11-20, 02:13

Mind you, when I ask this question, I'm not talking about a general purpose computer. But I am talking about a general purpose cpu.

Basically I'm wondering if it's possible to boot a cpu and, without having any RAM, and without thrashing the hard drive or flash drive, have it do useful work. In my head I have a mental vision of a cd that boots into truly bare-bone Linux and runs distributed.net stuff, but you can come up with your own idea if you want.

axn · 2012-11-20, 03:11

No.

jasong · 2012-11-20, 03:34

Quote:

Originally Posted by axn

No.

Care to explain why not?

cheesehead · 2012-11-20, 04:33

When your RAM-less computer adds 1 and 2 to get 3, from where is it going to get the 1 and the 2 if there's no RAM?

LaurV · 2012-11-20, 04:35

Depends how you define RAM. Turing machines (for example) have no RAM (in the classical definition, as memory with a random access). There are also a couple of Markov algorithms which can do a lot of useful things without storing any temporary variables/values.

edit: @cheesehead, crosspost: that is a bad example, you need no ram for it, those are inputs and outputs only, no need to store anything.

cheesehead · 2012-11-20, 04:38

Quote:

Originally Posted by LaurV

Depends how you define RAM. Turing machines (for example) have no RAM (in the classical definition, as memory with a random access).

So, the RAM-less computer is going to have that little tape on which the Turing CPU writes and reads marks (which isn't RAM because its access is sequential-only)?

Quote:

There are also a couple of Markov algorithms which can do a lot of useful things without storing any temporary variables/values.

Not really "general-purpose", though.

axn · 2012-11-20, 05:29

Quote:

Originally Posted by jasong

Care to explain why not?

Quote:

Originally Posted by LaurV

edit: @cheesehead, crosspost: that is a bad example, you need no ram for it, those are inputs and outputs only, no need to store anything.

The CPU reads an instruction from RAM**, decodes it and executes it. For the execution, it needs to read input(s) and write output(s). For many instructions, the input and output can be from registers -- no RAM yet. But eventually, some of it must come from/go to RAM for it to be useful.

When loading and executing a program from CD, it has to be first loaded into RAM -- the CPU does not know how to execute things from peripherals.

Without RAM, today's general purpose CPU cannot work. Period. End of.

**Initial boot code actually comes from ROM.

Dubslow · 2012-11-20, 05:34

Quote:

Originally Posted by axn

The CPU reads an instruction from RAM**, decodes it and executes it. For the execution, it needs to read input(s) and write output(s). For many instructions, the input and output can be from registers -- no RAM yet. But eventually, some of it must come from/go to RAM for it to be useful.

When loading and executing a program from CD, it has to be first loaded into RAM -- the CPU does not know how to execute things from peripherals.

Without RAM, today's general purpose CPU cannot work. Period. End of.

**Initial boot code actually comes from ROM.

What about the cache though? In my desktop, there's 8MB of L3 cache.

(I'm guessing that even if you had an OS that could run cache-only, something in the hardware of the motherboard and/or CPU requires RAM...)

PS @jason even if the software and hardware allowed it, you couldn't really do anything useful; even a current LL test would take up the entire 8 MB that I mention above.

axn · 2012-11-20, 05:43

Quote:

Originally Posted by Dubslow

What about the cache though? In my desktop, there's 8MB of L3 cache.

Cache is, by definition, not visible to software. i.e., no way for software to specify to read/write data to cache (instead of RAM). Any data in cache must eventually come from/go to RAM.

cheesehead · 2012-11-20, 05:54

Quote:

Originally Posted by LaurV

edit: @cheesehead, crosspost: that is a bad example, you need no ram for it, those are inputs and outputs only, no need to store anything.

No need to store anything?

From where, exactly, are you pulling the "1" and "2" values (you do realize that those are just stand-ins for actual data values, don't you -- that this isn't intended to be literally 1+2=3 with no variation in data values?) and to where, exactly, are you putting the "3" result so that it can be useful?

Would it be clearer if I'd used "addend₁", "addend₂" and "sum"?

aketilander · 2012-11-20, 07:14

Depends how you pose the question. If the question is: "Is there a simple way to ...?" The answer is no. If the question is more like a theoretical question, "Would it be possible ...?" I am not sure, but it would involve to write a new BIOS and a new OS, then you might use the GPU and the memory on the Graphic card or maybe remotely on another computer so why would you like to do something as complicated as that when RAM is so cheap, but I don't really think that would work either since if I remember it rightly there is a part of the BIOS which is imprinted in the hardware, at least in the old days it used to be only hardware. Nowadays I think the BIOS is EEPROM but I think there are limitations of what you can do.

2012-11-20, 02:13	#1
jasong "Jason Goatcher" Mar 2005 DB3₁₆ Posts	Can a RAM-less computer run? Mind you, when I ask this question, I'm not talking about a general purpose computer. But I am talking about a general purpose cpu. Basically I'm wondering if it's possible to boot a cpu and, without having any RAM, and without thrashing the hard drive or flash drive, have it do useful work. In my head I have a mental vision of a cd that boots into truly bare-bone Linux and runs distributed.net stuff, but you can come up with your own idea if you want.

2012-11-20, 04:35	#5
LaurV Romulan Interpreter "name field" Jun 2011 Thailand 41·251 Posts	Depends how you define RAM. Turing machines (for example) have no RAM (in the classical definition, as memory with a random access). There are also a couple of Markov algorithms which can do a lot of useful things without storing any temporary variables/values. edit: @cheesehead, crosspost: that is a bad example, you need no ram for it, those are inputs and outputs only, no need to store anything. Last fiddled with by LaurV on 2012-11-20 at 04:37

2012-11-20, 07:14	#11
aketilander "Åke Tilander" Apr 2011 Sandviken, Sweden 236₁₆ Posts	Depends how you pose the question. If the question is: "Is there a simple way to ...?" The answer is no. If the question is more like a theoretical question, "Would it be possible ...?" I am not sure, but it would involve to write a new BIOS and a new OS, then you might use the GPU and the memory on the Graphic card or maybe remotely on another computer so why would you like to do something as complicated as that when RAM is so cheap, but I don't really think that would work either since if I remember it rightly there is a part of the BIOS which is imprinted in the hardware, at least in the old days it used to be only hardware. Nowadays I think the BIOS is EEPROM but I think there are limitations of what you can do. Last fiddled with by aketilander on 2012-11-20 at 07:23

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old Computer	Primeinator	Information & Answers	21	2011-12-12 22:05
New computer ???s	c10ck3r	Hardware	12	2011-04-30 23:53
Not my computer	RichardB	Information & Answers	2	2010-09-04 03:21
New Computer	Housemouse	Hardware	16	2008-06-09 21:04
help ~ what's my computer doing!	merlinh	Software	2	2004-05-09 21:50

2012-11-20, 04:33	#4
cheesehead "Richard B. Woods" Aug 2002 Wisconsin USA 1E0C₁₆ Posts	When your RAM-less computer adds 1 and 2 to get 3, from where is it going to get the 1 and the 2 if there's no RAM?

2012-11-20, 03:11	#2
axn Jun 2003 2³×683 Posts	No.