Hardware Benchmark Jest Thread for 100M exponents

[joblack]

Originally Posted by retina

Don't we also have to know the RAM configuration to properly compare the systems?

W00t, I still hold the record!!!!!!

Bigger numbers are better ... right?

Theoretically yes but if you use standard memory components and you read the configuration from the RAM-information-rom you will get a fair estimate.

[retina]

Originally Posted by joblack

Theoretically yes but if you use standard memory components and you read the configuration from the RAM-information-rom you will get a fair estimate.

A fair estimate of what? What are "standard memory components"?

All I can see above is mostly just the CPU specs and no RAM timing info. How many channels, at what clock speeds, with what delays, over what bus, in SMP or NUMA arrangement etc.? I think that the RAM configuration will likely make a significant proportion of the figures above, and without all those gory details the comparisons won't really be very valid. Only in the very loosest sense can we use those figures as a basis for comparative value assessment, but any individual CPU will be constrained by how you attach memory to it.

[joblack]

Originally Posted by retina

A fair estimate of what? What are "standard memory components"?

All I can see above is mostly just the CPU specs and no RAM timing info. How many channels, at what clock speeds, with what delays, over what bus, in SMP or NUMA arrangement etc.? I think that the RAM configuration will likely make a significant proportion of the figures above, and without all those gory details the comparisons won't really be very valid. Only in the very loosest sense can we use those figures as a basis for comparative value assessment, but any individual CPU will be constrained by how you attach memory to it.

Well, as far as I can see there is no special overclocking memory used (perhaps the 980x is an exception). I have no special overclocking memory and I let the BIOS decide what values to pick (spd rom).

This thread should be just a rule of thumb to get a feeling for the performance for Prime95 applications.

[alexhiggins732]

Weird.. After 4 threads the estimated time starts get higher !?! I ran it a few times to make sure it wasn't a fluke but pretty consistent.

Intel Xeon E5440 @2.53GHz, 8 cores
Cpu Speed: 2533.46 MHz, 8 cores
Cpu Features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2, SSE4
L1 Cache: 32Kb
L2 Cache: 256Kb
L3 Cache: 8MB

[Apr 1 21:54] Worker starting
[Apr 1 21:54] Setting affinity to run worker on logical CPU #0
[Apr 1 21:54] Using FFT length 20M
[Apr 1 21:54] p: 332220523. Time: 555.267 ms.
[Apr 1 21:54] p: 332220523. Time: 555.267 ms.
[Apr 1 21:54] p: 332220523. Time: 562.105 ms.
[Apr 1 21:54] p: 332220523. Time: 555.736 ms.
[Apr 1 21:54] p: 332220523. Time: 580.505 ms.
[Apr 1 21:55] p: 332220523. Time: 554.443 ms.
[Apr 1 21:55] p: 332220523. Time: 570.536 ms.
[Apr 1 21:55] p: 332220523. Time: 565.314 ms.
[Apr 1 21:55] p: 332220523. Time: 586.194 ms.
[Apr 1 21:55] p: 332220523. Time: 543.349 ms.
[Apr 1 21:55] p: 332220523. Time: 544.856 ms.
[Apr 1 21:55] Iterations: 10. Total time: 5.618 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 2160 days, 7 hours, 40 minutes.
[Apr 1 21:55] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:55] Using FFT length 20M, 2 threads
[Apr 1 21:55] p: 332220523. Time: 276.706 ms.
[Apr 1 21:55] p: 332220523. Time: 275.946 ms.
[Apr 1 21:55] p: 332220523. Time: 275.962 ms.
[Apr 1 21:55] p: 332220523. Time: 275.481 ms.
[Apr 1 21:55] p: 332220523. Time: 275.578 ms.
[Apr 1 21:55] p: 332220523. Time: 275.805 ms.
[Apr 1 21:55] p: 332220523. Time: 333.920 ms.
[Apr 1 21:55] p: 332220523. Time: 310.741 ms.
[Apr 1 21:55] p: 332220523. Time: 316.261 ms.
[Apr 1 21:55] p: 332220523. Time: 313.510 ms.
[Apr 1 21:55] Iterations: 10. Total time: 2.930 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 1126 days, 14 hours, 13 minutes.
[Apr 1 21:55] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:55] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:55] Using FFT length 20M, 3 threads
[Apr 1 21:55] p: 332220523. Time: 188.545 ms.
[Apr 1 21:55] p: 332220523. Time: 188.634 ms.
[Apr 1 21:55] p: 332220523. Time: 188.818 ms.
[Apr 1 21:55] p: 332220523. Time: 188.890 ms.
[Apr 1 21:55] p: 332220523. Time: 188.503 ms.
[Apr 1 21:55] p: 332220523. Time: 188.796 ms.
[Apr 1 21:55] p: 332220523. Time: 189.016 ms.
[Apr 1 21:55] p: 332220523. Time: 188.882 ms.
[Apr 1 21:55] p: 332220523. Time: 219.635 ms.
[Apr 1 21:55] p: 332220523. Time: 244.324 ms.
[Apr 1 21:55] Iterations: 10. Total time: 1.974 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 759 days, 1 hour, 9 minutes.
[Apr 1 21:55] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:55] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:55] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 21:55] Using FFT length 20M, 4 threads
[Apr 1 21:55] p: 332220523. Time: 147.966 ms.
[Apr 1 21:55] p: 332220523. Time: 148.195 ms.
[Apr 1 21:55] p: 332220523. Time: 149.565 ms.
[Apr 1 21:55] p: 332220523. Time: 148.316 ms.
[Apr 1 21:55] p: 332220523. Time: 148.287 ms.
[Apr 1 21:55] p: 332220523. Time: 148.087 ms.
[Apr 1 21:55] p: 332220523. Time: 148.730 ms.
[Apr 1 21:55] p: 332220523. Time: 148.252 ms.
[Apr 1 21:55] p: 332220523. Time: 148.222 ms.
[Apr 1 21:55] p: 332220523. Time: 151.757 ms.
[Apr 1 21:55] Iterations: 10. Total time: 1.487 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 571 days, 22 hours, 1 minute.
[Apr 1 21:55] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:55] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:55] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 21:55] Setting affinity to run helper thread 4 on logical CPU #4
[Apr 1 21:55] Using FFT length 20M, 5 threads
[Apr 1 21:55] p: 332220523. Time: 197.447 ms.
[Apr 1 21:55] p: 332220523. Time: 201.803 ms.
[Apr 1 21:55] p: 332220523. Time: 211.029 ms.
[Apr 1 21:55] p: 332220523. Time: 190.537 ms.
[Apr 1 21:55] p: 332220523. Time: 183.968 ms.
[Apr 1 21:55] p: 332220523. Time: 183.491 ms.
[Apr 1 21:55] p: 332220523. Time: 184.280 ms.
[Apr 1 21:55] p: 332220523. Time: 183.744 ms.
[Apr 1 21:55] p: 332220523. Time: 185.835 ms.
[Apr 1 21:55] p: 332220523. Time: 183.403 ms.
[Apr 1 21:55] Iterations: 10. Total time: 1.906 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 732 days, 16 hours, 57 minutes.
[Apr 1 21:55] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:55] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:55] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 21:55] Setting affinity to run helper thread 4 on logical CPU #4
[Apr 1 21:55] Setting affinity to run helper thread 5 on logical CPU #5
[Apr 1 21:55] Using FFT length 20M, 6 threads
[Apr 1 21:55] p: 332220523. Time: 196.571 ms.
[Apr 1 21:55] p: 332220523. Time: 177.313 ms.
[Apr 1 21:55] p: 332220523. Time: 171.910 ms.
[Apr 1 21:55] p: 332220523. Time: 171.560 ms.
[Apr 1 21:55] p: 332220523. Time: 171.463 ms.
[Apr 1 21:55] p: 332220523. Time: 171.427 ms.
[Apr 1 21:55] p: 332220523. Time: 171.275 ms.
[Apr 1 21:55] p: 332220523. Time: 171.319 ms.
[Apr 1 21:55] p: 332220523. Time: 171.628 ms.
[Apr 1 21:55] p: 332220523. Time: 171.507 ms.
[Apr 1 21:55] Iterations: 10. Total time: 1.746 sec.
[Apr 1 21:55] Estimated time to complete this exponent: 671 days, 8 hours, 27 minutes.
[Apr 1 21:56] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:56] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:56] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 21:56] Setting affinity to run helper thread 4 on logical CPU #4
[Apr 1 21:56] Setting affinity to run helper thread 5 on logical CPU #5
[Apr 1 21:56] Setting affinity to run helper thread 6 on logical CPU #6
[Apr 1 21:56] Using FFT length 20M, 7 threads
[Apr 1 21:56] p: 332220523. Time: 383.518 ms.
[Apr 1 21:56] p: 332220523. Time: 257.154 ms.
[Apr 1 21:56] p: 332220523. Time: 237.166 ms.
[Apr 1 21:56] p: 332220523. Time: 237.500 ms.
[Apr 1 21:56] p: 332220523. Time: 236.936 ms.
[Apr 1 21:56] p: 332220523. Time: 366.694 ms.
[Apr 1 21:56] p: 332220523. Time: 269.348 ms.
[Apr 1 21:56] p: 332220523. Time: 485.202 ms.
[Apr 1 21:56] p: 332220523. Time: 218.329 ms.
[Apr 1 21:56] p: 332220523. Time: 250.371 ms.
[Apr 1 21:56] Iterations: 10. Total time: 2.942 sec.
[Apr 1 21:56] Estimated time to complete this exponent: 1131 days, 7 hours, 49 minutes.
[Apr 1 21:56] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 21:56] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 21:56] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 21:56] Setting affinity to run helper thread 4 on logical CPU #4
[Apr 1 21:56] Setting affinity to run helper thread 5 on logical CPU #5
[Apr 1 21:56] Setting affinity to run helper thread 6 on logical CPU #6
[Apr 1 21:56] Setting affinity to run helper thread 7 on logical CPU #7
[Apr 1 21:56] Using FFT length 20M, 8 threads
[Apr 1 21:56] p: 332220523. Time: 168.873 ms.
[Apr 1 21:56] p: 332220523. Time: 168.268 ms.
[Apr 1 21:56] p: 332220523. Time: 168.335 ms.
[Apr 1 21:56] p: 332220523. Time: 169.642 ms.
[Apr 1 21:56] p: 332220523. Time: 180.696 ms.
[Apr 1 21:56] p: 332220523. Time: 194.416 ms.
[Apr 1 21:56] p: 332220523. Time: 474.813 ms.
[Apr 1 21:56] p: 332220523. Time: 219.500 ms.
[Apr 1 21:56] p: 332220523. Time: 220.793 ms.
[Apr 1 21:56] p: 332220523. Time: 222.447 ms.
[Apr 1 21:56] Iterations: 10. Total time: 2.188 sec.
[Apr 1 21:56] Estimated time to complete this exponent: 841 days, 5 hours, 38 minutes.
[Apr 1 21:56] Worker stopped.

[alexhiggins732]

Xeon 3220 @2.40GHz, 4 cores

[Apr 1 22:16] Worker starting
[Apr 1 22:16] Setting affinity to run worker on logical CPU #0
[Apr 1 22:17] Using FFT length 20M
[Apr 1 22:17] p: 332220523. Time: 612.204 ms.
[Apr 1 22:17] p: 332220523. Time: 612.288 ms.
[Apr 1 22:17] p: 332220523. Time: 612.165 ms.
[Apr 1 22:17] p: 332220523. Time: 611.890 ms.
[Apr 1 22:17] p: 332220523. Time: 612.521 ms.
[Apr 1 22:17] p: 332220523. Time: 611.756 ms.
[Apr 1 22:17] p: 332220523. Time: 612.039 ms.
[Apr 1 22:17] p: 332220523. Time: 612.416 ms.
[Apr 1 22:17] p: 332220523. Time: 611.825 ms.
[Apr 1 22:17] p: 332220523. Time: 611.974 ms.
[Apr 1 22:17] Iterations: 10. Total time: 6.121 sec.
[Apr 1 22:17] Estimated time to complete this exponent: 2353 days, 15 hours, 26 minutes.
[Apr 1 22:17] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 22:17] Using FFT length 20M, 2 threads
[Apr 1 22:17] p: 332220523. Time: 326.861 ms.
[Apr 1 22:17] p: 332220523. Time: 327.092 ms.
[Apr 1 22:17] p: 332220523. Time: 327.384 ms.
[Apr 1 22:17] p: 332220523. Time: 327.045 ms.
[Apr 1 22:17] p: 332220523. Time: 327.270 ms.
[Apr 1 22:17] p: 332220523. Time: 327.815 ms.
[Apr 1 22:17] p: 332220523. Time: 327.139 ms.
[Apr 1 22:17] p: 332220523. Time: 326.362 ms.
[Apr 1 22:17] p: 332220523. Time: 327.217 ms.
[Apr 1 22:17] p: 332220523. Time: 327.175 ms.
[Apr 1 22:17] Iterations: 10. Total time: 3.271 sec.
[Apr 1 22:17] Estimated time to complete this exponent: 1257 days, 21 hours, 14 minutes.
[Apr 1 22:17] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 22:17] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 22:17] Using FFT length 20M, 3 threads
[Apr 1 22:17] p: 332220523. Time: 267.687 ms.
[Apr 1 22:17] p: 332220523. Time: 268.345 ms.
[Apr 1 22:17] p: 332220523. Time: 269.221 ms.
[Apr 1 22:17] p: 332220523. Time: 267.873 ms.
[Apr 1 22:17] p: 332220523. Time: 268.364 ms.
[Apr 1 22:17] p: 332220523. Time: 267.855 ms.
[Apr 1 22:17] p: 332220523. Time: 268.868 ms.
[Apr 1 22:17] p: 332220523. Time: 268.329 ms.
[Apr 1 22:17] p: 332220523. Time: 267.877 ms.
[Apr 1 22:17] p: 332220523. Time: 269.055 ms.
[Apr 1 22:17] Iterations: 10. Total time: 2.683 sec.
[Apr 1 22:17] Estimated time to complete this exponent: 1031 days, 20 hours, 1 minute.
[Apr 1 22:17] Setting affinity to run helper thread 1 on logical CPU #1
[Apr 1 22:17] Setting affinity to run helper thread 2 on logical CPU #2
[Apr 1 22:17] Setting affinity to run helper thread 3 on logical CPU #3
[Apr 1 22:17] Using FFT length 20M, 4 threads
[Apr 1 22:18] p: 332220523. Time: 212.435 ms.
[Apr 1 22:18] p: 332220523. Time: 214.314 ms.
[Apr 1 22:18] p: 332220523. Time: 212.396 ms.
[Apr 1 22:18] p: 332220523. Time: 212.725 ms.
[Apr 1 22:18] p: 332220523. Time: 212.079 ms.
[Apr 1 22:18] p: 332220523. Time: 215.065 ms.
[Apr 1 22:18] p: 332220523. Time: 212.162 ms.
[Apr 1 22:18] p: 332220523. Time: 213.286 ms.
[Apr 1 22:18] p: 332220523. Time: 212.079 ms.
[Apr 1 22:18] p: 332220523. Time: 212.436 ms.
[Apr 1 22:18] Iterations: 10. Total time: 2.129 sec.
[Apr 1 22:18] Estimated time to complete this exponent: 818 days, 14 hours, 56 minutes.
[Apr 1 22:18] Worker stopped.

[joblack]

Originally Posted by alexhiggins732

Weird.. After 4 threads the estimated time starts get higher !?! I ran it a few times to make sure it wasn't a fluke but pretty consistent.

Intel Xeon E5440 @2.53GHz, 8 cores
Cpu Speed: 2533.46 MHz, 8 cores
Cpu Features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2, SSE4
L1 Cache: 32Kb
L2 Cache: 256Kb
L3 Cache: 8MB

Yes hyperthreading is not Prime95's friend (the Xeon E5440 has only 4 'real' cores) ;).

[lfm]

AMD Phenom(tm) II X4 940 Processor @ 3ghz
2x1gb DDR2 1066mhz
mprime 25.11 b2
Linux 2.6.28




[Worker #1 17:48] Setting affinity to run worker on logical CPU #0
[Worker #1 17:48] Using FFT length 20M
[Worker #1 17:48] p: 332220523. Time: 557.075 ms.
[Worker #1 17:48] p: 332220523. Time: 557.364 ms.
[Worker #1 17:48] p: 332220523. Time: 557.681 ms.
[Worker #1 17:48] p: 332220523. Time: 557.365 ms.
[Worker #1 17:48] p: 332220523. Time: 557.430 ms.
[Worker #1 17:48] p: 332220523. Time: 557.154 ms.
[Worker #1 17:48] p: 332220523. Time: 557.001 ms.
[Worker #1 17:48] p: 332220523. Time: 557.290 ms.
[Worker #1 17:48] p: 332220523. Time: 557.066 ms.
[Worker #1 17:49] p: 332220523. Time: 557.365 ms.
[Worker #1 17:49] Iterations: 10. Total time: 5572.791 ms.
[Worker #1 17:49] Estimated time to complete this exponent: 2142 days, 19 hours, 39 minutes.
[Worker #1 17:49] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 17:49] Using FFT length 20M, 2 threads
[Worker #1 17:49] p: 332220523. Time: 321.830 ms.
[Worker #1 17:49] p: 332220523. Time: 321.814 ms.
[Worker #1 17:49] p: 332220523. Time: 321.917 ms.
[Worker #1 17:49] p: 332220523. Time: 321.687 ms.
[Worker #1 17:49] p: 332220523. Time: 321.562 ms.
[Worker #1 17:49] p: 332220523. Time: 321.681 ms.
[Worker #1 17:49] p: 332220523. Time: 321.705 ms.
[Worker #1 17:49] p: 332220523. Time: 321.732 ms.
[Worker #1 17:49] p: 332220523. Time: 321.522 ms.
[Worker #1 17:49] p: 332220523. Time: 321.691 ms.
[Worker #1 17:49] Iterations: 10. Total time: 3217.141 ms.
[Worker #1 17:49] Estimated time to complete this exponent: 1237 days, 0 hours, 53 minutes.
[Worker #1 17:49] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 17:49] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 17:49] Using FFT length 20M, 3 threads
[Worker #1 17:49] p: 332220523. Time: 227.930 ms.
[Worker #1 17:49] p: 332220523. Time: 228.024 ms.
[Worker #1 17:49] p: 332220523. Time: 227.843 ms.
[Worker #1 17:49] p: 332220523. Time: 227.560 ms.
[Worker #1 17:49] p: 332220523. Time: 228.323 ms.
[Worker #1 17:49] p: 332220523. Time: 227.899 ms.
[Worker #1 17:49] p: 332220523. Time: 227.524 ms.
[Worker #1 17:49] p: 332220523. Time: 228.132 ms.
[Worker #1 17:49] p: 332220523. Time: 227.946 ms.
[Worker #1 17:49] p: 332220523. Time: 228.136 ms.
[Worker #1 17:49] Iterations: 10. Total time: 2279.317 ms.
[Worker #1 17:49] Estimated time to complete this exponent: 876 days, 10 hours, 19 minutes.
[Worker #1 17:49] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 17:49] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 17:49] Setting affinity to run helper thread 3 on logical CPU #3
[Worker #1 17:49] Using FFT length 20M, 4 threads
[Worker #1 17:49] p: 332220523. Time: 194.566 ms.
[Worker #1 17:49] p: 332220523. Time: 194.423 ms.
[Worker #1 17:49] p: 332220523. Time: 194.646 ms.
[Worker #1 17:49] p: 332220523. Time: 194.552 ms.
[Worker #1 17:49] p: 332220523. Time: 194.577 ms.
[Worker #1 17:49] p: 332220523. Time: 194.461 ms.
[Worker #1 17:49] p: 332220523. Time: 194.396 ms.
[Worker #1 17:49] p: 332220523. Time: 194.626 ms.
[Worker #1 17:49] p: 332220523. Time: 194.641 ms.
[Worker #1 17:49] p: 332220523. Time: 194.476 ms.
[Worker #1 17:49] Iterations: 10. Total time: 1945.364 ms.
[Worker #1 17:49] Estimated time to complete this exponent: 748 days, 0 hours, 29 minutes.
[Worker #1 17:49] Worker stopped.

[Cruelty]

Core i5 750 @ 3.6GHz / 4GB DDR3-1600 CL7 / mprime 25.11.8 / Linux x86-64

[Worker #1 Apr 4 02:10] Worker starting
[Worker #1 Apr 4 02:10] Setting affinity to run worker on logical CPU #0
[Worker #1 Apr 4 02:10] Using FFT length 20M
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 392.714 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.021 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.135 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.044 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.105 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.099 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.159 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.037 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.093 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 393.161 ms.
[Worker #1 Apr 4 02:10] Iterations: 10.  Total time: 3.931 sec.
[Worker #1 Apr 4 02:10] Estimated time to complete this exponent: 1511 days, 8 hours, 38 minutes.
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Apr 4 02:10] Using FFT length 20M, 2 threads
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.567 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.863 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.773 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.928 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 200.400 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 200.577 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.738 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.826 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.931 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 199.802 ms.
[Worker #1 Apr 4 02:10] Iterations: 10.  Total time: 1.999 sec.
[Worker #1 Apr 4 02:10] Estimated time to complete this exponent: 768 days, 19 hours, 12 minutes.
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 Apr 4 02:10] Using FFT length 20M, 3 threads
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 135.725 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.473 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.231 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.129 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.211 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.314 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.382 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.260 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 139.196 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 138.310 ms.
[Worker #1 Apr 4 02:10] Iterations: 10.  Total time: 1.381 sec.
[Worker #1 Apr 4 02:10] Estimated time to complete this exponent: 531 days, 2 hours, 28 minutes.
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 1 on logical CPU #1
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 2 on logical CPU #2
[Worker #1 Apr 4 02:10] Setting affinity to run helper thread 3 on logical CPU #3
[Worker #1 Apr 4 02:10] Using FFT length 20M, 4 threads
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 105.881 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 108.486 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 110.399 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 109.792 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 109.762 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 109.867 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 110.226 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 109.765 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 106.930 ms.
[Worker #1 Apr 4 02:10] p: 332220523.  Time: 111.866 ms.
[Worker #1 Apr 4 02:10] Iterations: 10.  Total time: 1.093 sec.
[Worker #1 Apr 4 02:10] Estimated time to complete this exponent: 420 days, 6 hours, 20 minutes.
[Worker #1 Apr 4 02:10] Worker stopped.

[joblack]

Originally Posted by Cruelty

Core i5 750 @ 3.6GHz / 4GB DDR3-1600 CL7 / mprime 25.11.8 / Linux x86-64
...
[Worker #1 Apr 4 02:10] Estimated time to complete this exponent: 420 days, 6 hours, 20 minutes.
[Worker #1 Apr 4 02:10] Worker stopped.
[/code]

Hyperthreading enabled or disabled?

[lycorn]

i5-750 is not hyperthreaded.

[nucleon]

Any benchmarks on non x86 architecture? CUDA on the nvidia video cards for example?

-- Craig