LLRnet servers for NPLB - Page 102

MyDogBuster · 2009-07-25, 16:04

I'm not getting work again on G4000. It connects but nothing is sent. Sounds like a config problem.

Looks like it's been this way for about 5 hours now. Switching to my independent stuff.

gd_barnes · 2009-07-25, 16:24

I'm beginning to think I should just give up on hosting my own servers. It requires far more technical knowledge than I have and I'm out of town too much to keep being concerned about it every time I leave. I feel bad that people are losing so much of their CPU time. It's becoming not worth it. It's too costly to the project and to individuals.

Max, can you see what is up again? Also, please add the JobMaxTime as well as the rejected pairs file to the web page for both servers. Those are a must have at this point.

Edit: In looking, I think we may need to run that stupid loop thingie if it wasn't previously run. I think the pruning has caused that same problem as before. I wish we could just turn off the pruning permanently. Alas, I know that is not a possibility.

Karsten, no, I didn't misunderstand you. I was wrong on port G8000 being 5 days though. As Max said G4000 and G8000 are 3 days. I'm sorry about all of those rejected pairs. Later today, I'll look in the rejected pairs file. Unless someone else connected to the server and took them (including yourself), they shouldn't have been rejected. 1 day should be enough. If it's not, you'll have to take less pairs. I'm sorry. We cannot keep bugging the server guys to mess around with these JobMaxTimes. They've been changed multiple times already. For machines that need longer times, I would suggest manual reservations. We still have plenty of k's available in the individual-k drive to search manually.

MyDogBuster · 2009-07-25, 16:29

Something is really wierd. I switched to my independent stuff and 30 minutes later gb4000 accepts 4 results. See the results file for that port. 6 AM it stops accepting my stuff and 11AM it accepts 4, 1/2 hour AFTER I switched. This is the Twilight Zone.

Flatlander · 2009-07-25, 16:37

Quote:

Originally Posted by gd_barnes

I'm beginning to think I should just give up on hosting my own servers.

I must say that I do try to avoid your servers because of their unreliability.

gd_barnes · 2009-07-25, 16:38

I'm ready to throw in the towel on G4000 and G8000. Is anyone in favor of moving those to IronBits machines? We'll make them a JobMaxTime of 3 days and keep them there. Everything else stays at 1 day with IB9000 at 2 days. Obviously they'll need to be a different port.

Max, you could keep the rest of the servers on my machines such as the PRPnet servers as well as your personal servers. I'm now wanting to get away from non-experimental public NPLB servers on my machines. Experimental ones like for PRPnet are OK.

gd_barnes · 2009-07-25, 16:39

Quote:

Originally Posted by Flatlander

I must say that I do try to avoid your servers because of their unreliability.

I don't blame you.

kar_bon · 2009-07-25, 20:02

what's going on now with GB8000?

just sent 31 results but no new ones!

PS: they're in the last copy-off, but could not receive new!

PPS: DOE'S ANYONE GOT AN EYE ON THE SERVER????

look at the IB9000 joblist with ALL available pairs upto 900k reserved by ltest,test or '&'!!!!

KILL THAT GUY!!!!!!!!!!!!!!!!!!!!

PPPS: same with IB2000 and IB4000!

MyDogBuster · 2009-07-25, 20:11

Quote:

what's going on now with GB8000?

just sent 31 results but no new ones!

PS: they're in the last copy-off, but could not receive new!

I've had that problem all day with GB4000.

kar_bon · 2009-07-25, 20:18

someone has to stop the server! NOW!!!

kar_bon · 2009-07-25, 20:24

<after calming down>

my suggestion:

for further running those LLRnet server we have to restrict the access.

if it's possible to send pairs only to registered persons, so do this.

perhaps by indetification of the IP or any access or login!

otherwise we had to stop LLRnet and do all things manually!

mdettweiler · 2009-07-25, 20:42

Quote:

Originally Posted by kar_bon

<after calming down>

my suggestion:

for further running those LLRnet server we have to restrict the access.

if it's possible to send pairs only to registered persons, so do this.

perhaps by indetification of the IP or any access or login!

otherwise we had to stop LLRnet and do all things manually!

Okay, I've shut down GB4000 and GB8000. Meanwhile, I *think* I've got the IP address of the guy who was grabbing all of those pairs. I'll do a bit of digging and see what I can come up with.

Also, I agree with what Gary's been saying about running LLRnet servers on his machines. We seem to be running into one problem after another. If everyone is OK with the idea of moving the servers to David's machines, I can package up the knpairs.txt files and send them to David so he can load them into new servers.

2009-07-25, 16:04	#1112
MyDogBuster May 2008 Wilmington, DE 5444₈ Posts	I'm not getting work again on G4000. It connects but nothing is sent. Sounds like a config problem. Looks like it's been this way for about 5 hours now. Switching to my independent stuff. Last fiddled with by MyDogBuster on 2009-07-25 at 16:07

2009-07-25, 16:24	#1113
gd_barnes May 2007 Kansas; USA 24254₈ Posts	I'm beginning to think I should just give up on hosting my own servers. It requires far more technical knowledge than I have and I'm out of town too much to keep being concerned about it every time I leave. I feel bad that people are losing so much of their CPU time. It's becoming not worth it. It's too costly to the project and to individuals. Max, can you see what is up again? Also, please add the JobMaxTime as well as the rejected pairs file to the web page for both servers. Those are a must have at this point. Edit: In looking, I think we may need to run that stupid loop thingie if it wasn't previously run. I think the pruning has caused that same problem as before. I wish we could just turn off the pruning permanently. Alas, I know that is not a possibility. Karsten, no, I didn't misunderstand you. I was wrong on port G8000 being 5 days though. As Max said G4000 and G8000 are 3 days. I'm sorry about all of those rejected pairs. Later today, I'll look in the rejected pairs file. Unless someone else connected to the server and took them (including yourself), they shouldn't have been rejected. 1 day should be enough. If it's not, you'll have to take less pairs. I'm sorry. We cannot keep bugging the server guys to mess around with these JobMaxTimes. They've been changed multiple times already. For machines that need longer times, I would suggest manual reservations. We still have plenty of k's available in the individual-k drive to search manually. Last fiddled with by gd_barnes on 2009-07-25 at 16:41

2009-07-25, 16:38	#1116
gd_barnes May 2007 Kansas; USA 2²×19×137 Posts	I'm ready to throw in the towel on G4000 and G8000. Is anyone in favor of moving those to IronBits machines? We'll make them a JobMaxTime of 3 days and keep them there. Everything else stays at 1 day with IB9000 at 2 days. Obviously they'll need to be a different port. Max, you could keep the rest of the servers on my machines such as the PRPnet servers as well as your personal servers. I'm now wanting to get away from non-experimental public NPLB servers on my machines. Experimental ones like for PRPnet are OK. Last fiddled with by gd_barnes on 2009-07-25 at 16:42

2009-07-25, 20:02	#1118
kar_bon Mar 2006 Germany 2²×727 Posts	what's going on now with GB8000? just sent 31 results but no new ones! PS: they're in the last copy-off, but could not receive new! PPS: DOE'S ANYONE GOT AN EYE ON THE SERVER???? look at the IB9000 joblist with ALL available pairs upto 900k reserved by ltest,test or '&'!!!! KILL THAT GUY!!!!!!!!!!!!!!!!!!!! PPPS: same with IB2000 and IB4000! Last fiddled with by kar_bon on 2009-07-25 at 20:17

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRPnet servers for NPLB	mdettweiler	No Prime Left Behind	228	2018-12-26 04:50
Servers for NPLB	gd_barnes	No Prime Left Behind	0	2009-08-10 19:21
LLRnet servers for CRUS	gd_barnes	Conjectures 'R Us	39	2008-07-15 10:26
NPLB LLRnet server discussion	em99010pepe	No Prime Left Behind	229	2008-04-30 19:13
NPLB LLRnet server #1 - dried	em99010pepe	No Prime Left Behind	19	2008-03-26 06:19

2009-07-25, 16:29	#1114
MyDogBuster May 2008 Wilmington, DE 5444₈ Posts	Something is really wierd. I switched to my independent stuff and 30 minutes later gb4000 accepts 4 results. See the results file for that port. 6 AM it stops accepting my stuff and 11AM it accepts 4, 1/2 hour AFTER I switched. This is the Twilight Zone.

2009-07-25, 20:18	#1120
kar_bon Mar 2006 Germany 2²·727 Posts	someone has to stop the server! NOW!!!

2009-07-25, 20:24	#1121
kar_bon Mar 2006 Germany 2²×727 Posts	<after calming down> my suggestion: for further running those LLRnet server we have to restrict the access. if it's possible to send pairs only to registered persons, so do this. perhaps by indetification of the IP or any access or login! otherwise we had to stop LLRnet and do all things manually!