Team drive #1: k=400-1001 n=333.2K-600K - Page 61

gd_barnes · 2008-12-22, 23:19

A HUGE CONGRATS TO EVERYONE INVOLVED IN THIS GREAT PROJECT!!

What a spectacular finish to get to n=600K before year end.

Let's keep 'er rolling in 2009!

Over the next couple of weeks, we'll have to set some more specific goals for the upcoming year.

Gary

mdettweiler · 2008-12-23, 00:09

Quote:

Originally Posted by gd_barnes

Over the next couple of weeks, we'll have to set some more specific goals for the upcoming year.

Here's one: how about we aim for n=700K on drives 5, 6, and 7 by the end of February?

(I was thinking the end of January at first but that might be a bit of a stretch for all three drives.)

gd_barnes · 2008-12-23, 07:35

Quote:

Originally Posted by mdettweiler

Here's one: how about we aim for n=700K on drives 5, 6, and 7 by the end of February?

(I was thinking the end of January at first but that might be a bit of a stretch for all three drives.)

Hold your horses.

I was hoping for n=800K by YEAR END so maybe n=700K by May month end! Keep in mind we'll have to pull a lot of resources off of these drives to run the k=1005-2000 range. Also, there is a whole lot of sieving that needs to be done for that drive. Likely I'll be down to 3-4 quads at most processing the 5th-6th-7th drives a majority of the time, at least in the next 2-3 months while we make headway on that new range, both in sieving and prime finding.

Gary

mdettweiler · 2008-12-23, 07:44

Quote:

Originally Posted by gd_barnes

Hold your horses.

I was hoping for n=800K by YEAR END so maybe n=700K by May month end! Keep in mind we'll have to pull a lot of resources off of these drives to run the k=1005-2000 range. Also, there is a whole lot of sieving that needs to be done for that drive. Likely I'll be down to 3-4 quads at most processing the 5th-6th-7th drives a majority of the time, at least in the next 2-3 months while we make headway on that new range, both in sieving and prime finding.

Gary

Hmm...I see. I had forgotten to factor in the impact of starting the k=1005-2000 range or any of that stuff.

In that case, 700K by the end of May and 800K by year end is much more realistic.

gd_barnes · 2008-12-23, 07:44

The first k/n pair remaining on port 400 is now n>600K. We are now unofficially complete to n=600K!!

David, you can change the JobMaxTime on port 400 back to 3 days now.

We will be officially complete to n=600K when Max processes the final results file to me and I verify that all results from n=540K-600K are there (minus a missing range that Patrick did not post results for) plus all primes are reported in the appropriate places. I'll do the verification Wednesday.

Max, when you send me the results file, you can mark the range as complete in the 1st post here.

Gary

IronBits · 2008-12-23, 08:15

Done, back to 3 days.

mdettweiler · 2008-12-23, 19:07

Quote:

Originally Posted by gd_barnes

The first k/n pair remaining on port 400 is now n>600K. We are now unofficially complete to n=600K!!

David, you can change the JobMaxTime on port 400 back to 3 days now.

We will be officially complete to n=600K when Max processes the final results file to me and I verify that all results from n=540K-600K are there (minus a missing range that Patrick did not post results for) plus all primes are reported in the appropriate places. I'll do the verification Wednesday.

Max, when you send me the results file, you can mark the range as complete in the 1st post here.

Gary

Okay, here you go:

LLRnet IB400 has completed 588K-596K and 596.6K-598K, lresults emailed to Gary.

BTW--your mention of Patrick's range that he didn't give you results for reminded me of something I was wondering: are we planning to re-do that range? Or do we not need to worry about that until our doublecheck effort gets up that far?

gd_barnes · 2008-12-24, 10:31

Quote:

Originally Posted by mdettweiler

Okay, here you go:

LLRnet IB400 has completed 588K-596K and 596.6K-598K, lresults emailed to Gary.

BTW--your mention of Patrick's range that he didn't give you results for reminded me of something I was wondering: are we planning to re-do that range? Or do we not need to worry about that until our doublecheck effort gets up that far?

I'll consider the drive officially complete without them but will likely put a couple of cores on them sometime in Jan. for completeness, perhaps after k=289 is complete to n=800K, which I estimate in ~2 weeks.

Gary

gd_barnes · 2008-12-26, 08:08

All results files have been verified for the 1st drive. It is now officially complete! This thread will be unstickied shortly. See details in the news thread here.

Gary

henryzz · 2009-02-06, 16:52

Quote:

Originally Posted by gd_barnes

I'll consider the drive officially complete without them but will likely put a couple of cores on them sometime in Jan. for completeness, perhaps after k=289 is complete to n=800K, which I estimate in ~2 weeks.

Gary

just in case you have forgotten
has this been done yet?

KAMCOBILL · 2009-02-24, 05:48

I just got this email:

GREAT NEWS. You have found a Prime! on the NPLB Project.

username=X Grubbers Kick Ass_KAMCOBILL
[2008-05-24 11:27:00]
525*2^446286-1 is Prime!

It was found by your computer in 3805 seconds
It has a NPLB Pair Score of 1.244819961225
It has a NPLB Prime Score of 1.38886430303815

You got this prime from Server: AS, Port: 300

For information on what to do with this prime check out the NPLB forum.
For example:
If running in Team Drive #8 then follow these instructions:
http://www.mersenneforum.org/showthread.php?t=11390

DO NOT REPLY - this is an automatically generated message.

I thought it was reported as confirmed in drive 1 and it is listed as confirmed. What do I do now. Help!

Thanks

Bill

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Team drive #14: k=600-1001 n=1M-2M	mdettweiler	No Prime Left Behind	10	2021-03-13 22:32
Team drive #7 k=800-1001 n=600K-1M	gd_barnes	No Prime Left Behind	127	2011-07-15 14:25
Team drive #6 k=600-800 n=600K-1M	gd_barnes	No Prime Left Behind	89	2011-03-10 12:34
Team drive #5: k=400-600 n=600K-1M	gd_barnes	No Prime Left Behind	135	2010-11-23 14:27
Team drive #4, 15 k's < 300 for n=600K-1M	gd_barnes	No Prime Left Behind	38	2008-10-22 16:20

2008-12-22, 23:19	#661
gd_barnes May 2007 Kansas; USA 3³×5×7×11 Posts	A HUGE CONGRATS TO EVERYONE INVOLVED IN THIS GREAT PROJECT!! What a spectacular finish to get to n=600K before year end. Let's keep 'er rolling in 2009! Over the next couple of weeks, we'll have to set some more specific goals for the upcoming year. Gary

2008-12-23, 07:44	#665
gd_barnes May 2007 Kansas; USA 289B₁₆ Posts	The first k/n pair remaining on port 400 is now n>600K. We are now unofficially complete to n=600K!! David, you can change the JobMaxTime on port 400 back to 3 days now. We will be officially complete to n=600K when Max processes the final results file to me and I verify that all results from n=540K-600K are there (minus a missing range that Patrick did not post results for) plus all primes are reported in the appropriate places. I'll do the verification Wednesday. Max, when you send me the results file, you can mark the range as complete in the 1st post here. Gary

2008-12-23, 08:15	#666
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 3·7·53 Posts	Done, back to 3 days.

2008-12-26, 08:08	#669
gd_barnes May 2007 Kansas; USA 3³·5·7·11 Posts	All results files have been verified for the 1st drive. It is now officially complete! This thread will be unstickied shortly. See details in the news thread here. Gary

2009-02-24, 05:48	#671
KAMCOBILL Apr 2006 3×11 Posts	I just got this email: GREAT NEWS. You have found a Prime! on the NPLB Project. username=X Grubbers Kick Ass_KAMCOBILL [2008-05-24 11:27:00] 525*2^446286-1 is Prime! It was found by your computer in 3805 seconds It has a NPLB Pair Score of 1.244819961225 It has a NPLB Prime Score of 1.38886430303815 You got this prime from Server: AS, Port: 300 For information on what to do with this prime check out the NPLB forum. For example: If running in Team Drive #8 then follow these instructions: http://www.mersenneforum.org/showthread.php?t=11390 DO NOT REPLY - this is an automatically generated message. I thought it was reported as confirmed in drive 1 and it is listed as confirmed. What do I do now. Help! Thanks Bill