Team drive #9 k=1005-2000 n=50K-350K - Page 11

IronBits · 2009-01-08, 04:45

Ok, just send me the link on where to download it and I'll get er done.

gd_barnes · 2009-01-08, 05:14

OK, give me a few hours and I'll send it over. I'm knee deep in updating CRUS web pages right now.

Max, there's no way I would have to move all of my quads here for us to finish by the 20th. I'm thinking we can get it 60-75% done without any help from me. Remember we effectively are doing 50 k's in < 2 days, which means < 20 days for all 500 k's. That's where I'm getting the rough estimate of 60-75% done by the 20th (13 days) without any help from me.

I want to do some more exact calculations after the HUGE file is loaded into the server. If necessary, I'll move 1-3 quads over. I doubt it'll be necessary to move more than 3.

This is kind of nuts but it's funny!

Gary

IronBits · 2009-01-08, 07:43

No problem, was busy fixing a rollover script, hopefully for the last time.

We completed 116330 pairs yesterday!

gd_barnes · 2009-01-08, 08:54

Quote:

Originally Posted by IronBits

No problem, was busy fixing a rollover script, hopefully for the last time.

We completed 116330 pairs yesterday!

The monster file has been sent. Have fun with that bad boy!

IronBits · 2009-01-08, 09:02

Took it awhile for the server to load it up. ~1 minute
30,433,041 Jan 8 2009 sieve1200-2000-50K-200K.txt
35,310,390 Jan 8 01:57 knpairs.txt

IronBits · 2009-01-08, 09:06

Port 9000 has 2820526 remaining knpairs!
knpairs.txt - Size: 35310390
Last Updated: 1/8/2009 1:57:29 AM
first k/n pair 1013 148714
last k/n pair
That last k/n pair is not shown, probably because the file is so big, but, no one should be looking at the copy of knpairs.txt while it is so big right? ;)
I'll take a look at it tomorrow, if it has not fixed itself by then.

Edit: stopped the server, edited knpairs.txt to remove the last line of the file that contained just a ^Z character

Back up and running full tilt.

IronBits · 2009-01-08, 09:43

Port 9000 has 2820525 remaining knpairs!
knpairs.txt - Size: 35310389
Last Updated: 1/8/2009 2:38:55 AM
first k/n pair 1013 148714
last k/n pair 1999 199973
jobMaxTime = 1 * 24 * 3600 -- 1 days
prunePeriod = 1 * 1 * 3600 -- hourly

gd_barnes · 2009-01-08, 21:45

Quote:

Originally Posted by IronBits

Port 9000 has 2820526 remaining knpairs!
knpairs.txt - Size: 35310390
Last Updated: 1/8/2009 1:57:29 AM
first k/n pair 1013 148714
last k/n pair
That last k/n pair is not shown, probably because the file is so big, but, no one should be looking at the copy of knpairs.txt while it is so big right? ;)
I'll take a look at it tomorrow, if it has not fixed itself by then.

Edit: stopped the server, edited knpairs.txt to remove the last line of the file that contained just a ^Z character

Back up and running full tilt.

Oops, my bad there. I had the files all nice and separated into 100k files but when we decided to run it as all one big file, I went to the DOS prompt and executed a single copy command to bring them all back into one file. But for some reason, DOS always wants to put an invalid character at the end of the file when copying many files into one file.

That's stupid Windows for you again!

Edit: Oops, I forgot: I'm officially reserving k=1201-1999 for n=50K-200K for port 9000. I also changed the wording in the 1st post to show that we won't be doing manual files for this n-range but likely will for the n=200K-350K range.

Gary

henryzz · 2009-01-09, 09:13

Quote:

Originally Posted by gd_barnes

Oops, my bad there. I had the files all nice and separated into 100k files but when we decided to run it as all one big file, I went to the DOS prompt and executed a single copy command to bring them all back into one file. But for some reason, DOS always wants to put an invalid character at the end of the file when copying many files into one file.

That's stupid Windows for you again!

Edit: Oops, I forgot: I'm officially reserving k=1201-1999 for n=50K-200K for port 9000. I also changed the wording in the 1st post to show that we won't be doing manual files for this n-range but likely will for the n=200K-350K range.

Gary

if you have got cygwin installed then you could just use cat which IMHO is more predictable for things like that
i recently discovered that once the PATH variable is set up properly then you can use most of the cygwin commands from inside the command prompt

kar_bon · 2009-01-09, 10:11

Quote:

Originally Posted by gd_barnes

Oops, my bad there. I had the files all nice and separated into 100k files but when we decided to run it as all one big file, I went to the DOS prompt and executed a single copy command to bring them all back into one file. But for some reason, DOS always wants to put an invalid character at the end of the file when copying many files into one file.

try

Code:

type *.txt >all.txt

this will 'copy' (actually list) all *.txt-files in one file called 'all.txt' without the $1A-value at the end!

gd_barnes · 2009-01-09, 10:20

Added a quad to the fun. I will likely add 3 more cores later today.

Max, it might be best to go ahead and process the results in ranges of 100k (actually ~50 k's), i.e. k=1005-1100, 1100-1200, etc. As soon as you see that the first k/n pair is k>=1101, then you can go ahead with it.

As soon as I can after getting the file from you, I'll start compiling a list of primes and finders. THAT should be interesting! lol

Gary

2009-01-08, 07:43	#113
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 3×7×53 Posts	No problem, was busy fixing a rollover script, hopefully for the last time. We completed 116330 pairs yesterday! Last fiddled with by IronBits on 2009-01-08 at 07:50

2009-01-08, 09:02	#115
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 2131₈ Posts	Took it awhile for the server to load it up. ~1 minute 30,433,041 Jan 8 2009 sieve1200-2000-50K-200K.txt 35,310,390 Jan 8 01:57 knpairs.txt Last fiddled with by IronBits on 2009-01-08 at 09:41

2009-01-08, 09:06	#116
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 3×7×53 Posts	Port 9000 has 2820526 remaining knpairs! knpairs.txt - Size: 35310390 Last Updated: 1/8/2009 1:57:29 AM first k/n pair 1013 148714 last k/n pair That last k/n pair is not shown, probably because the file is so big, but, no one should be looking at the copy of knpairs.txt while it is so big right? ;) I'll take a look at it tomorrow, if it has not fixed itself by then. Edit: stopped the server, edited knpairs.txt to remove the last line of the file that contained just a ^Z character Back up and running full tilt. Last fiddled with by IronBits on 2009-01-08 at 09:42

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Team drive #10 k=1400-2000 n=500K-1M	gd_barnes	No Prime Left Behind	61	2013-01-30 16:08
Team drive #12 k=2000-3000 n=50K-425K	gd_barnes	No Prime Left Behind	96	2012-02-19 03:53
Team drive #11 k=2000-3000 n=425K-600K	gd_barnes	No Prime Left Behind	42	2010-11-19 10:42
Team drive #8 k=1400-2000 n=350K-500K	gd_barnes	No Prime Left Behind	101	2009-04-08 02:11
Sieving drive for k=1005-2000 n=200K-500K	gd_barnes	No Prime Left Behind	118	2009-01-17 16:05

2009-01-08, 04:45	#111
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 459₁₆ Posts	Ok, just send me the link on where to download it and I'll get er done.

2009-01-08, 05:14	#112
gd_barnes May 2007 Kansas; USA 10395₁₀ Posts	OK, give me a few hours and I'll send it over. I'm knee deep in updating CRUS web pages right now. Max, there's no way I would have to move all of my quads here for us to finish by the 20th. I'm thinking we can get it 60-75% done without any help from me. Remember we effectively are doing 50 k's in < 2 days, which means < 20 days for all 500 k's. That's where I'm getting the rough estimate of 60-75% done by the 20th (13 days) without any help from me. I want to do some more exact calculations after the HUGE file is loaded into the server. If necessary, I'll move 1-3 quads over. I doubt it'll be necessary to move more than 3. This is kind of nuts but it's funny! Gary

2009-01-08, 09:43	#117
IronBits I ♥ BOINC! Oct 2002 Glendale, AZ. (USA) 3×7×53 Posts	Port 9000 has 2820525 remaining knpairs! knpairs.txt - Size: 35310389 Last Updated: 1/8/2009 2:38:55 AM first k/n pair 1013 148714 last k/n pair 1999 199973 jobMaxTime = 1 * 24 * 3600 -- 1 days prunePeriod = 1 * 1 * 3600 -- hourly

2009-01-09, 10:20	#121
gd_barnes May 2007 Kansas; USA 3³·5·7·11 Posts	Added a quad to the fun. I will likely add 3 more cores later today. Max, it might be best to go ahead and process the results in ranges of 100k (actually ~50 k's), i.e. k=1005-1100, 1100-1200, etc. As soon as you see that the first k/n pair is k>=1101, then you can go ahead with it. As soon as I can after getting the file from you, I'll start compiling a list of primes and finders. THAT should be interesting! lol Gary