Computer Freez! help!!
 

Lately my computer was startet to freez random, sometimes after 5 minutes other times after 12 hours.
according to PCwizrd2006 my CPU, Motherboard and HDD tempratures are under the maximum temperature.
Then I ran SP2004 and got this error:

Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 767 Time: 15
CPU: 1809MHz FSB: 200MHz [201MHz x 9.0 est.]
Starting MBMStarter.dll...
Started MBMStarter.dll: 1
20-11-2006 14:41 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 18 seconds - 1 errors, 0 warnings.
Execution halted.
-----
Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15
CPU: 1809MHz FSB: 200MHz [201MHz x 9.0 est.]
Using existing MBM info
20-11-2006 14:58 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 15 minutes 24 seconds - 1 errors, 0 warnings.
Execution halted.
----
Type: Small FFTs - stress CPU Min: 8 Max: 32 InPlace: Yes Mem: 8 Time: 15
CPU: 1809MHz FSB: 200MHz [201MHz x 9.0 est.]
Using existing MBM info
20-11-2006 15:14 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
FATAL ERROR: Resulting sum was 521013991356481, expected: 502464707924337.6
Hardware failure detected, consult stress.txt file.
Torture Test ran 3 minutes 24 seconds - 1 errors, 0 warnings.
Execution halted.

My PC:
ASUS K8N4-E motherboard
AMD Athlon 64 Processor 2800+ 1.8 GHz
2x512mb kingston ram
ATI Radeon x300
Maxtor S-ATA HDD - systemdisk
WD S-ATA HDD

When I formatet I also updatet my BIOS, so that could be the problem ís there a way to downgrade the BIOS??

I really have no idea why my computer freez can anyone help me please!!

I doubt it is a BIOS problem.

Try some of the following - hopefully something will help you pass the torture test.

1) Reduce the bus speed - even if that means you are underclocking.
2) Swap memory sticks with a different computer.
3) Try running with just one memory stick - then try the other.
4) Try increasing CPU voltage slightly
5) Try increasing memory voltage slightly.
6) Try slower memory timings.
7) Get a program that monitors voltages to see if you have a power supply problem.