[QUOTE=storm5510;550438]I think I will stop running for now.[/QUOTE]

You could instead run in offline mode, if you like: "do not contact PrimeNet server automatically".

[QUOTE=storm5510;550438]Something sure is out of place. I am getting HTML in [I]mprime's[/I] console when it tries to send a result. I think I will stop running for now.[/QUOTE]

That's pretty much what happens when the server is unreachable. Keep on crunching.

[QUOTE=kruoli;550442]You could instead run in offline mode, if you like: "do not contact PrimeNet server automatically".[/QUOTE]

At first, I did not see the file [U]mprime.spl[/U]. It appears results are placed here when the server is not reachable. I knew [I]Prime95[/I] did this with a similar name. The default retry interval in [I]mprime[/I] is 70 minutes. There is nothing specific in the configuration, [U]prime.txt[/U] or [U]local.txt.[/U]

[QUOTE=axn]That's pretty much what happens when the server is unreachable. Keep on crunching.[/QUOTE]

I have already restarted. :smile:

Assigned results (not Manual) timing out for 10 hours now.
 

[QUOTE][Comm thread Jul 13 00:02] Sending result to server: UID: petrw1/Magic_8_Ball, M40385207 has a factor: 6402438646760818548080303 (P-1, B1=1500000, B2=30000000, E=12)
[Comm thread Jul 13 00:02]
[Comm thread Jul 13 00:05] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 00:05] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 00:05] Visit [url]http://mersenneforum.org[/url] for help.
[Comm thread Jul 13 00:05] Will try contacting server again in 70 minutes.
[Comm thread Jul 13 01:15] Sending result to server: UID: petrw1/Magic_8_Ball, M40385207 has a factor: 6402438646760818548080303 (P-1, B1=1500000, B2=30000000, E=12)
[Comm thread Jul 13 01:15]
[Comm thread Jul 13 01:18] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 01:18] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 01:18] Visit [url]http://mersenneforum.org[/url] for help.
[Comm thread Jul 13 01:18] Will try contacting server again in 70 minutes.[/QUOTE]

etc, etc. and still....

But factor is recorded [URL="https://www.mersenne.org/report_exponent/?exp_lo=40385207&exp_hi=&full=1"]here[/URL]; just no mention of where/who it came from.

BTW all other computers and the GPU from this computer continue to report normally

[QUOTE][Comm thread Jul 13 10:35] Updating computer information on the server
[Comm thread Jul 13 10:35] URL: [url]http://v5.mersenne.org/v5server/?v=0.95&px=GIMPS&t=uc&g=626f371aed2e7a72e5c5cfd800a84bec&hg=3856fcc225600c23a234e81bd5ad3f3a&wg=4092587934d41a54945485e82db217f3&a=Wind[/url]
[Comm thread Jul 13 10:35] == Info: About to connect() to v5.mersenne.org port 80
[Comm thread Jul 13 10:35] == Info: Trying 162.212.57.131...
[Comm thread Jul 13 10:35] == Info: connected
[Comm thread Jul 13 10:35] == Info: Connected to v5.mersenne.org (162.212.57.131) port 80
[Comm thread Jul 13 10:35] => Send header: GET /v5server/?v=0.95&px=GIMPS&t=uc&g=626f371aed2e7a72e5c5cfd800a84bec&hg=3856fcc225600c23a234e81bd5ad3f3a&wg=4092587934d41a54945485e82db217f3&a=Windows64,P
[Comm thread Jul 13 10:35] Host: v5.mersenne.org
[Comm thread Jul 13 10:35] Accept: */*
[Comm thread Jul 13 10:35]
[Comm thread Jul 13 10:35] <= Recv header: HTTP/1.1 200 OK
[Comm thread Jul 13 10:35] <= Recv header: Content-Type: text/html; charset=UTF-8
[Comm thread Jul 13 10:35] <= Recv header: Server: Microsoft-IIS/8.5
[Comm thread Jul 13 10:35] <= Recv header: X-Powered-By: PHP/7.1.10
[Comm thread Jul 13 10:35] <= Recv header: Date: Mon, 13 Jul 2020 16:35:33 GMT
[Comm thread Jul 13 10:35] <= Recv header: Content-Length: 127
[Comm thread Jul 13 10:35] <= Recv data: pnErrorResult=0
[Comm thread Jul 13 10:35] pnErrorDetail=SUCCESS
[Comm thread Jul 13 10:35] g=626f371aed2e7a72e5c5cfd800a84bec
[Comm thread Jul 13 10:35] u=petrw1
[Comm thread Jul 13 10:35] un=Sid & Andy
[Comm thread Jul 13 10:35] cn=Magic_8_Ball
[Comm thread Jul 13 10:35] od=19
[Comm thread Jul 13 10:35] ==END==
[Comm thread Jul 13 10:35]
[Comm thread Jul 13 10:35] == Info: Connection #0 to host v5.mersenne.org left intact
[Comm thread Jul 13 10:35] == Info: Closing connection #0
[Comm thread Jul 13 10:35] RESPONSE:
[Comm thread Jul 13 10:35] pnErrorResult=0
[Comm thread Jul 13 10:35] pnErrorDetail=SUCCESS
[Comm thread Jul 13 10:35] g=626f371aed2e7a72e5c5cfd800a84bec
[Comm thread Jul 13 10:35] u=petrw1
[Comm thread Jul 13 10:35] un=Sid & Andy
[Comm thread Jul 13 10:35] cn=Magic_8_Ball
[Comm thread Jul 13 10:35] od=19
[Comm thread Jul 13 10:35] ==END==
[Comm thread Jul 13 10:35]
[Comm thread Jul 13 10:35] Sending result to server: UID: petrw1/Magic_8_Ball, M40385207 has a factor: 6402438646760818548080303 (P-1, B1=1500000, B2=30000000, E=12)
[Comm thread Jul 13 10:35]
[Comm thread Jul 13 10:35] URL: http://v5.mersenne.org/v5server/?v=0.95&px=GIMPS&t=ar&g=626f371aed2e7a72e5c5cfd800a84bec&k=0&m={"status":"F",+"exponent":40385207,+"worktype":"P-1",+"factors":["640243
[Comm thread Jul 13 10:35] == Info: About to connect() to v5.mersenne.org port 80
[Comm thread Jul 13 10:35] == Info: Trying 162.212.57.131...
[Comm thread Jul 13 10:35] == Info: connected
[Comm thread Jul 13 10:35] == Info: Connected to v5.mersenne.org (162.212.57.131) port 80
[Comm thread Jul 13 10:35] => Send header: GET /v5server/?v=0.95&px=GIMPS&t=ar&g=626f371aed2e7a72e5c5cfd800a84bec&k=0&m={"status":"F",+"exponent":40385207,+"worktype":"P-1",+"factors":["6402438646760
[Comm thread Jul 13 10:35] Host: v5.mersenne.org
[Comm thread Jul 13 10:35] Accept: */*
[Comm thread Jul 13 10:35]
[Comm thread Jul 13 10:38] == Info: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 10:38] == Info: Closing connection #0
[Comm thread Jul 13 10:38] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 10:38] CURL library error: Operation timed out after 180 seconds with 0 bytes received
[Comm thread Jul 13 10:38] Visit [url]http://mersenneforum.org[/url] for help.
[Comm thread Jul 13 10:38] Will try contacting server again in 70 minutes.
[/QUOTE]

[QUOTE=Prime95;550411]OK, not as bad as first thought... TF assignments below 99xxxxxx that had an unverified first-time LL/PRP test got axed (in other words exponents that need a DC).[/QUOTE]
Wow. Thought you made a bad mistake but were mistaken.
Even your mistakes are high quality.
Thanks for the unneeded-TF-assignments-blocking-progress cleanup.

[QUOTE=petrw1;550463]BTW all other computers and the GPU from this computer continue to report normally[/QUOTE]

There's definitely something broken on Primenet... My twelve (12#) Colab sessions, and my two P-1'ing boxes, are all seeing timeouts and/or 500 errors more often than successful comms...

Based on the error logs something is unhappy with the database since about 0130h UTC today, so for the last 16 hours or so. I assume George or Aaron will need to restart SQL.

Server finally communicated but FACTOR result rejected.
 

[QUOTE][Comm thread Jul 13 14:15] Updating computer information on the server
[Comm thread Jul 13 14:15] Sending result to server: UID: petrw1/Magic_8_Ball, M40385207 has a factor: 6402438646760818548080303 (P-1, B1=1500000, B2=30000000, E=12)
[Comm thread Jul 13 14:15]
[Comm thread Jul 13 14:15] PrimeNet error 40: No assignment
[Comm thread Jul 13 14:15] Factoring result for M40385207 was not needed
[/QUOTE]

My earlier post shows that it belonged to me.
[URL="https://www.mersenne.org/report_exponent/?exp_lo=40385207&exp_hi=&full=1"]Exponent status[/URL] still has no record of it.

Maybe I just need to be patient?

I'm not wise in the way of managing a Windows Server. But Aaron seems to be offline, so I've tried restarting the SQLServer service. Fingers crossed, the problems will go away.

[QUOTE=Prime95;550490]I'm not wise --.[/QUOTE]

seems to have been successful.

[URL="https://www.mersenne.org/report_exponent/?exp_lo=53535997&full=1"]https://www.mersenne.org/report_exponent/?exp_lo=53535997&full=1[/URL]

[SIZE="1"][B][Mon Jul 13 22:09:52 2020 - ver 29.8]
Updating computer information on the server

Sending result to server: UID: geschwen/AMDRyzen7-3700X, M53535997 is not prime. Res64: A82B0FE4964A5332. Wh4: C2EA4EDE,49466291,00000000, AID: 33A4F4D7DD889122871A45663DFECD50

PrimeNet success code with additional info:
LL test successfully completes double-check of M53535997 --
CPU credit is 102.5642 GHz-days.[/B][/SIZE]

[QUOTE=Prime95;550490]Fingers crossed, the problems will go away.[/QUOTE]

"Have you tried turning it off, and on again?" - IT Crowd et al.

Thanks, George. Looks good.