No Paul...still running but cannot connect to server. You can connect because your machine is on the same network as the server and pointing to an internal IP.

[QUOTE=pinhodecarlos;434645]No Paul...still running but cannot connect to server. You can connect because your machine is on the same network as the server and pointing to an internal IP.[/QUOTE]

Agreed:

[code]
jon% telnet 109.109.168.71 8195
Trying 109.109.168.71...
telnet: connect to address 109.109.168.71: Connection refused
telnet: Unable to connect to remote host
jon%
[/code]

[QUOTE=xilman;434644]Nothing obviously wrong with it;
[code]
[2016-05-22 18:44:31 GMT] Total Time: 55:18:11 Curves: 3594 Total Work: 17246412 Total Factors Found: 1
[2016-05-22 18:44:31 GMT] Connection from 192.168.1.1
[2016-05-22 18:44:31 GMT] pcl@horus (horus9) at 192.168.1.1: Sent GC_7_996 : 3734 ECM curves with B1=11000000
[/code]
One of my machines found a factor earlier today:
[code]
[2016-05-22 08:00:15 GMT] GC_8_966: prime factor returned by pcl@horus (horus9)! Factor=6760281230040088923139812900039408849091673 Method=ECM B1=11000000 Sigma=1
[2016-05-22 08:00:15 GMT] GC_8_966: Composite factor returned by pcl@horus (horus9)! Factor=386278789977361948390438783805711686965369076531572242756537707821327413506724148565973594416891905119724513613634913785778597830321612061459111323763052361385648823514577983077857489214850204851161254009985604123969530665930948311234240504230172151950229657953226407476163820535539820765369313122726963144172588809780535986099147061042847109858112230430810171542946948390884285090566010108035859650749499172113530210358022709009758300467104198873259228009957016895217204532478024213262115311825010535693307154043387264745312389192006856166739432112431164191099576077632378288794963928634227221104702125999590262680426527452456096137858443179993126469310599909270158048290503250126870657668465981955191988760522843449236506633146318680608327524044105534571 Method=ECM B1=11000000 Sigma=1
[/code]
Did it fix itself?[/QUOTE]

Oh wait, I see. Paul, you need to note which thread this is in. Carlos was talking about the HCN ECMnet server, not the GCW server.

I can't reach both servers. I've tried changing port to 8196 and nothing. Also tried my work machine.

[QUOTE=jyb;434648]Oh wait, I see. Paul, you need to note which thread this is in. Carlos was talking about the HCN ECMnet server, not the GCW server.[/QUOTE]Now I understand. The machine was unresponsive just now so I've rebooted and restarted the server.

Paul

[QUOTE=xilman;434683]Now I understand. The machine was unresponsive just now so I've rebooted and restarted the server.

Paul[/QUOTE]

Thank you Paul. Left my wife's laptop running ecm (she's out for the week in a conference at Sabhal Mòr Ostaig) so I hope it is connecting to the ecmserver and uploading work hence I don't remotely control it.

[QUOTE=pinhodecarlos;434690]Thank you Paul. Left my wife's laptop running ecm (she's out for the week in a conference at Sabhal Mòr Ostaig) so I hope it is connecting to the ecmserver and uploading work hence I don't remotely control it.[/QUOTE]

I'm guessing that this is her laptop in that case.

[code]pcl@ra:~/nums/ecmnet/server$ tail e*og
[2016-05-23 09:32:42 GMT] Connection from 86.7.53.62
[2016-05-23 09:32:42 GMT] pinhodecarlos@yahoo.com (home_05) at 86.7.53.62: Received 3+2_593 : 47 ECM curves with B1=11000000
[2016-05-23 09:32:42 GMT] Total Time: 3:12:10 Curves: 607 Total Work: 334739 Total Factors Found: 0
[2016-05-23 09:32:42 GMT] Connection from 86.7.53.62
[2016-05-23 09:32:42 GMT] pinhodecarlos@yahoo.com (home_06) at 86.7.53.62: Received 3+2_593 : 47 ECM curves with B1=11000000
[2016-05-23 09:32:42 GMT] Total Time: 3:12:10 Curves: 654 Total Work: 368357 Total Factors Found: 0
[2016-05-23 09:32:42 GMT] Connection from 86.7.53.62
[2016-05-23 09:32:42 GMT] pinhodecarlos@yahoo.com (home_05) at 86.7.53.62: Sent 11+2_280 : 3904 ECM curves with B1=11000000
[2016-05-23 09:32:43 GMT] Connection from 86.7.53.62
[2016-05-23 09:32:43 GMT] pinhodecarlos@yahoo.com (home_06) at 86.7.53.62: Sent 11+2_280 : 3904 ECM curves with B1=11000000
pcl@ra:~/nums/ecmnet/server$
[/code]

Correct, home5 and 6.

Down again?

[QUOTE=pinhodecarlos;434782]Down again?[/QUOTE]Yes. Just discovered that the machine won't reboot because its system disk is corrupted.

You're going to have to wait unti it is fixed.

[QUOTE=xilman;434795]Yes. Just discovered that the machine won't reboot because its system disk is corrupted.

You're going to have to wait unti it is fixed.[/QUOTE]

Can I support in anyway? Do you have a backup of that disk?