- **Riesel Prime Search**
(*https://www.mersenneforum.org/forumdisplay.php?f=59*)

- - **k=13236795**
(*https://www.mersenneforum.org/showthread.php?t=6529*)

I've included [url='https://www.rieselprime.de/ziki/Riesel_prime_13236795']k=13236795[/url] into the Wiki with the history data from this thread and reserved for you.
Not listed the sieve depth, but could do if needed. Also I have to check the old 15k-threads for older information. And give me a clue: Here and in the Top5000 pages you are listed as "Valerie", but signing here as Cedric. I've inserted a Person page (including the current reservation) for "Valerie" (because official), if this should be changed please PM me. |

1 Attachment(s)
Some bad news...
I have completed a double-check up to n=1M on this k. I found 7 missing primes. They are: 13236795*2^233152-1 13236795*2^240236-1 13236795*2^258893-1 13236795*2^259747-1 13236795*2^266093-1 13236795*2^267313-1 13236795*2^314563-1 Valerie, It appears that some sieving was done incorrectly for the range of n=220K-450K. I looked at the statuses in the old 15k search thread and found that your number of tests was much less than were in a file sieved by me to P=50T. Here is the thread: [URL]https://www.mersenneforum.org/showthread.php?t=3705[/URL] Here is a comparison of your number of tests in that thread compared to the number of tests in a file sieved to P=50T: post #11; n=220K-231K; 744 tests; sieve 1439 tests; 51.7% tested post #20; n=231K-240K; 576 tests; sieve 1183 tests; 48.7% tested post #21; n=240K-250K; 674 tests; sieve 1319 tests; 51.1% tested post #22; n=250K-280K; 1997 tests; sieve 3944 tests; 50.6% tested post #23; n=280K-300K; 1295 tests; sieve 2652 tests; 48.8% tested Summary total for n=220K-300K: 5286 tests; sieve 10537 tests; 50.2% tested; 5251 tests missing Your sieve depth back then was far less than P=50T so you should have more than 100% tested of my file. Clearly this only covers part of the "problem" 220K-450K range but the above was all that I found with enough detail on your number of tests to make a comparison to my file. I suspect that post #6 was the error. Where you state "Currently resieving the range 220000 through 500000 with Proth 0.42...found 3000+ factors which NewPGen initially not found". You may have been sieving for Proth primes, i.e. +1 instead of Riesel -1, and the program removed a lot of good Riesel tests. Also 3000+ factors after you have already sieved for quite awhile with NewPGen seems like a large number. I suspect that was in error. It appears that you later used a different sieve for n=450K-1M so the range of n=450K-500K looks OK. I also looked at your results for n=1M to 1.3M. The number of tests keeps rising abnormally as the testing gets higher: n=1.0M-1.1M 12752 tests n=1.1M-1.2M 13218 tests n=1.2M-1.3M 14251 tests n=1.2M-1.3M has 11.8% more tests than n=1.0M-1.1M, which is an unusual fluctuation considering it is a higher n-value. You may want to look into that. For comparison a sieve to P=50T has 13293, 13210, and 13139 tests respectively for the ranges. I will continue double-checking this k up to your current test limit of n=1.3M. It should be done in ~5 days. I've attached the primes and residues for n=0-1M and the sieve file for n=0-2M that is sieved to P=50T. The good news is that this k now has 113 primes for n<=1.3M...a very large number. :-) Gary |

Thank you gd barnes for double checking!
So it is time for an update... Since the confinements in belgium last / this year I cannot dedicate full time to this project I am staying with my elderly parents to take care for them I will see what I will decide when my last sieving range is done I hope that I soon can return home and finish this range Fyi I’am using srsieve 1.54 on my intel mac 2015 model :smile: Kind regards Valerie |

1 Attachment(s)
k=13236795 double-check is complete to n=1.3M. No problems were found for n=1M-1.3M. Primes and results attached.
I'll keep the remaining file for n=1.3M-2M sieved to P=50T available if needed in the future. |

[QUOTE=gd_barnes;575466]k=13236795 double-check is complete to n=1.3M. No problems were found for n=1M-1.3M. Primes and results attached.
I'll keep the remaining file for n=1.3M-2M sieved to P=50T available if needed in the future.[/QUOTE] Thank you gd_barnes!! Kind regards, Valerie |

[QUOTE=gd_barnes;575466]k=13236795 [...] I'll keep the remaining file for n=1.3M-2M sieved to P=50T available if needed in the future.[/QUOTE]
Gary, there's an option to include a [B]zipped[/B] sieve file in the Wiki, for example see [url='https://www.rieselprime.de/ziki/Riesel_prime_98475']k=98475[/url]: - edit the page - if not yet done: insert the "RSieve" parameter - set the value like "y" for yes - choose "Show preview" -> next to k-value "Upload me!" - open link in new tab - choose you local file (not greater than 2MByte!), Wiki name is given - upload and close the file-page - choose "Show preview" on the k-value page again, everything ok? -> save - link is blue as "(sieve)" downloadable for everyone |

[QUOTE=kar_bon;575476]Gary, there's an option to include a [B]zipped[/B] sieve file in the Wiki, for example see [URL="https://www.rieselprime.de/ziki/Riesel_prime_98475"]k=98475[/URL]:
- edit the page - if not yet done: insert the "RSieve" parameter - set the value like "y" for yes - choose "Show preview" -> next to k-value "Upload me!" - open link in new tab - choose you local file (not greater than 2MByte!), Wiki name is given - upload and close the file-page - choose "Show preview" on the k-value page again, everything ok? -> save - link is blue as "(sieve)" downloadable for everyone[/QUOTE] Done. Cool option! |

All times are UTC. The time now is 19:22. |

Powered by vBulletin® Version 3.8.11

Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.