-   Riesel Prime Search (
-   -   some tools for weights computing... (

Thomas11 2007-02-27 19:04

some tools for weights computing...
1 Attachment(s)
I was asked about the tools I'm using to compute the Nash weights for the larger k.
Since there might be some general interest, I'm uploading them into this thread, in hope that you find them useful. Thanks to MinGW I was able to prepare some Windows binaries too (since you're all Windoozers, right?).

You should note, that those tools where originally written for my personal use -- so there is no detailed information about the algorithms in the code, nor is there any help file etc...
Also note, that it's all about Riesel-ks, e.g. k*2^n-1. For the Proth-ks one has to modify the source code.

For general information related to the Nash weights you may also have a look into the [URL=""]15k forum[/URL], where I already posted a Linux binary of the nash weight calculator.

The first tool (attached to this post) calculates the Nash weight for a single k. It should work for any k of arbitrary length.

Usage is:
[CODE]nash <k>[/CODE]
for example:
[CODE]nash 12345
12345 2060 2064
The output is of the form [B]<k> <w> <w'>[/B].
The difference between [I]standard Nash weight (w)[/I] and [I]modified Nash weight (w')[/I] is that the standard Nash weight is computed for n=100001-110000, while the modified Nash weight is for n=1-10000. The latter is related to the [I]Proth weight[/I]:
[CODE]Proth weight = w' / 1751.542[/CODE]

Due to the limitation of only one attachment per posting, I will post the other stuff in the following separate posts...

Thomas11 2007-02-27 19:09

1 Attachment(s)
The next one is a multiple-k Nash calculator. Note that the current version is restricted to k<2^64 (e.g [I]unsigned long[/I])

Usage is:
[CODE]mnash <kmin> <kmax> <kstep>[/CODE]
for example:
[CODE]mnash 1 10 2
1 925 1176
3 2976 2933
5 2180 2176
7 912 917
9 1674 1678

(This is the same as the older "nash3" in the 15k forum.)

Thomas11 2007-02-27 19:33

1 Attachment(s)
The final one is a bit different.
Since the Nash algorithm is quite slow when computing large ranges (e.g. millions) of k, one needs a faster tool. Therefore I implemented an ordinary sieve for p up to 512 and a smaller n range of only 1-1000. Due to precomputation of the "reversed orders of n" the whole calculation can be done in cache memory and is therefore really fast (e.g. about 3000 k/sec on a 1.7 GHz P4).

So one can use [B]multi5[/B] for a fast pre-scanning of a k-range and then do some sorting on the results and run the "good ones" through [B]nash[/B].

For some historic reason it is written in Fortran (and lacks any comments) and there are no command line options. Therefore you need to edit the [I]steer.txt[/I] file for specifying the k-range and a print condition. The latter is necessary since otherwise the sieve would produce hundreds of megabytes of output within minutes...

The example [I]steer.txt[/I] file reads:
[CODE]32000000025 KMIN
32001000000 KMAX
600 minimum weight for printing
You may skip the text comments at the right. The printing condition means, that the k is only printed when the weight is higher or equal to the specified value (e.g. weight>=600 in the example). Note, that we use a smaller n-range (1-1000), therefore 600 is a rather high weight. The weights are roughly one tenth of the Nash weights. Also note the restriction of k<2^63 (signed long).

Usage is simply:
for the example [I]steer.txt[/I] file you will get:
32000060235 609
32000107425 622
32000193225 612
32000315325 605
32000497485 640
32000553585 618
32000703735 674
32000816445 601
32000982585 622

If you want to store the results, you can simply redirect the output to a file, e.g.:
[CODE]multi5 > my_ks.txt[/CODE]
Of course it works the some way for [B]nash[/B] and [B]mnash[/B]...

Thomas11 2007-02-27 19:42

I forgot to mention:
For [B]nash[/B] and [B]mnash[/B] I used a precompiled static GMP library. I haven't tested the binaries on a Windows machine without the GMP lib so far, nor have I tested them on a non-P4 (non-SSE2) machine.
So, if you run into trouble, just let me know...

Flatlander 2007-02-27 20:46

Nash Crash
Nash crashes in Windows. I assume I need to download the library you mentioned? Could you provide a direct link please.

XP Home
Athlon XP 3200+

Thomas11 2007-02-28 10:09

1 Attachment(s)
[QUOTE=Flatlander;99536]Nash crashes in Windows. I assume I need to download the library you mentioned? Could you provide a direct link please.

XP Home
Athlon XP 3200+[/QUOTE]

I used the following (german) link:

But probably in your case the problem is, that the library is precompiled for SSE2 machines, but your Athlon doesn't have SSE2...

Currently I don't have any Athlons running under Windows. :no:
But I could try to compile GMP from scratch without the SSE2 options this evening...

Edit: amphoria was so kind to generate a Windows binary (attached below) for the older [B]nash3[/B] (which is essentially the same as [B]mnash[/B]). I haven't tested it so far, but perhaps it works on your Athlon...

Flatlander 2007-02-28 13:46

Nash3 works. Thank you.

Thomas11 2007-02-28 14:39

P3/Athlon binaries for Windows
1 Attachment(s)
I created a new set of Windows binaries by using a different precompiled GMP library from: [URL=""][/URL]

The file contains [B]nash.exe[/B] and [B]mnash.exe[/B]. They are tested on an AthlonXP/Win2000 system and should work on P3 machines as well.

cipher 2009-05-11 13:04

Thomas 11
do you think multi5 code can be optimized to run faster on 64 bit OS?


Thomas11 2009-05-11 13:21

[QUOTE=cipher;173138]do you think multi5 code can be optimized to run faster on 64 bit OS?[/QUOTE]

I wouldn't expect any increase in speed since the (current) code will not benefit from a 64 bit architecture (e.g. 64 bit registers). The program was written to fit just into the limitations (e.g. cache size etc.) of the 32 bit processors of that time. Of course one could rewrite some parts to gain some benefit from 64 bits, but this would require some further investigation.
Probably a complete rewrite in C/C++ would be necessary...

pepi37 2015-07-02 21:09

I search for this article and will say this
"old" nash for 93*10^n-1 gives -93 10 5030 5045
"new" nash gives "only" -93 3116 3123
So what is correct ?

Second: how to calculate nash weight from 1 to 1000 on base 3?
mnash calculate only base 2, right?

Thanks for answer

All times are UTC. The time now is 17:56.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.